Commit eee64b70 authored by Sascha Hauer's avatar Sascha Hauer Committed by Boris Brezillon

mtd: nand: Introduce nand_data_interface

Currently we have no data structure to fully describe a NAND timing.
We only have struct nand_sdr_timings for NAND timings in SDR mode,
but nothing for DDR mode and also no container to store both types
of timing.
This patch adds struct nand_data_interface which stores the timing
type and a union of different timings. This can be used to pass to
drivers in order to configure the timing.
Add kerneldoc for struct nand_sdr_timings while touching it anyway.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent 2f94abfe
......@@ -572,6 +572,123 @@ struct nand_buffers {
uint8_t *databuf;
};
/**
* struct nand_sdr_timings - SDR NAND chip timings
*
* This struct defines the timing requirements of a SDR NAND chip.
* These information can be found in every NAND datasheets and the timings
* meaning are described in the ONFI specifications:
* www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
* Parameters)
*
* All these timings are expressed in picoseconds.
*
* @tALH_min: ALE hold time
* @tADL_min: ALE to data loading time
* @tALS_min: ALE setup time
* @tAR_min: ALE to RE# delay
* @tCEA_max: CE# access time
* @tCEH_min:
* @tCH_min: CE# hold time
* @tCHZ_max: CE# high to output hi-Z
* @tCLH_min: CLE hold time
* @tCLR_min: CLE to RE# delay
* @tCLS_min: CLE setup time
* @tCOH_min: CE# high to output hold
* @tCS_min: CE# setup time
* @tDH_min: Data hold time
* @tDS_min: Data setup time
* @tFEAT_max: Busy time for Set Features and Get Features
* @tIR_min: Output hi-Z to RE# low
* @tITC_max: Interface and Timing Mode Change time
* @tRC_min: RE# cycle time
* @tREA_max: RE# access time
* @tREH_min: RE# high hold time
* @tRHOH_min: RE# high to output hold
* @tRHW_min: RE# high to WE# low
* @tRHZ_max: RE# high to output hi-Z
* @tRLOH_min: RE# low to output hold
* @tRP_min: RE# pulse width
* @tRR_min: Ready to RE# low (data only)
* @tRST_max: Device reset time, measured from the falling edge of R/B# to the
* rising edge of R/B#.
* @tWB_max: WE# high to SR[6] low
* @tWC_min: WE# cycle time
* @tWH_min: WE# high hold time
* @tWHR_min: WE# high to RE# low
* @tWP_min: WE# pulse width
* @tWW_min: WP# transition to WE# low
*/
struct nand_sdr_timings {
u32 tALH_min;
u32 tADL_min;
u32 tALS_min;
u32 tAR_min;
u32 tCEA_max;
u32 tCEH_min;
u32 tCH_min;
u32 tCHZ_max;
u32 tCLH_min;
u32 tCLR_min;
u32 tCLS_min;
u32 tCOH_min;
u32 tCS_min;
u32 tDH_min;
u32 tDS_min;
u32 tFEAT_max;
u32 tIR_min;
u32 tITC_max;
u32 tRC_min;
u32 tREA_max;
u32 tREH_min;
u32 tRHOH_min;
u32 tRHW_min;
u32 tRHZ_max;
u32 tRLOH_min;
u32 tRP_min;
u32 tRR_min;
u64 tRST_max;
u32 tWB_max;
u32 tWC_min;
u32 tWH_min;
u32 tWHR_min;
u32 tWP_min;
u32 tWW_min;
};
/**
* enum nand_data_interface_type - NAND interface timing type
* @NAND_SDR_IFACE: Single Data Rate interface
*/
enum nand_data_interface_type {
NAND_SDR_IFACE,
};
/**
* struct nand_data_interface - NAND interface timing
* @type: type of the timing
* @timings: The timing, type according to @type
*/
struct nand_data_interface {
enum nand_data_interface_type type;
union {
struct nand_sdr_timings sdr;
} timings;
};
/**
* nand_get_sdr_timings - get SDR timing from data interface
* @conf: The data interface
*/
static inline const struct nand_sdr_timings *
nand_get_sdr_timings(const struct nand_data_interface *conf)
{
if (conf->type != NAND_SDR_IFACE)
return ERR_PTR(-EINVAL);
return &conf->timings.sdr;
}
/**
* struct nand_chip - NAND Private Flash Chip Data
* @mtd: MTD device registered to the MTD framework
......@@ -1030,55 +1147,6 @@ static inline int jedec_feature(struct nand_chip *chip)
: 0;
}
/*
* struct nand_sdr_timings - SDR NAND chip timings
*
* This struct defines the timing requirements of a SDR NAND chip.
* These informations can be found in every NAND datasheets and the timings
* meaning are described in the ONFI specifications:
* www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
* Parameters)
*
* All these timings are expressed in picoseconds.
*/
struct nand_sdr_timings {
u32 tALH_min;
u32 tADL_min;
u32 tALS_min;
u32 tAR_min;
u32 tCEA_max;
u32 tCEH_min;
u32 tCH_min;
u32 tCHZ_max;
u32 tCLH_min;
u32 tCLR_min;
u32 tCLS_min;
u32 tCOH_min;
u32 tCS_min;
u32 tDH_min;
u32 tDS_min;
u32 tFEAT_max;
u32 tIR_min;
u32 tITC_max;
u32 tRC_min;
u32 tREA_max;
u32 tREH_min;
u32 tRHOH_min;
u32 tRHW_min;
u32 tRHZ_max;
u32 tRLOH_min;
u32 tRP_min;
u32 tRR_min;
u64 tRST_max;
u32 tWB_max;
u32 tWC_min;
u32 tWH_min;
u32 tWHR_min;
u32 tWP_min;
u32 tWW_min;
};
/* get timing characteristics from ONFI timing mode. */
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment