ARM: bcm2835: fix DT node sort order

Re-order all the DT nodes so that they're ordered by their reg address.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

arch/arm/boot/dts/bcm2835.dtsi

@@ -60,14 +60,6 @@ rng {
 			reg = <0x7e104000 0x10>;
 		};
 
-		uart@20201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
 		gpio: gpio {
 			compatible = "brcm,bcm2835-gpio";
 			reg = <0x7e200000 0xb4>;
@@ -91,6 +83,14 @@ gpio: gpio {
 			#interrupt-cells = <2>;
 		};
 
+		uart@20201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
+		};
+
 		i2s: i2s@7e203000 {
 			compatible = "brcm,bcm2835-i2s";
 			reg = <0x7e203000 0x20>,
@@ -121,6 +121,14 @@ i2c0: i2c@20205000 {
 			status = "disabled";
 		};
 
+		sdhci: sdhci {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+
 		i2c1: i2c@20804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
@@ -131,14 +139,6 @@ i2c1: i2c@20804000 {
 			status = "disabled";
 		};
 
-		sdhci: sdhci {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
 		usb {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;