Skip to content

L
linux
Commit ef47fa52 authored by Pali Rohár's avatar Pali Rohár Committed by Dmitry Torokhov
Browse files
Options

Input: ALPS - move v7 packet info to Documentation and v6 packet info 

This patch move all packet info from driver source code to documentation
and adds info about v6 packet format (from driver source code).
Signed-off-by: default avatarPali Rohár <pali.rohar@gmail.com>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 626b9da0
Hide whitespace changes
Inline Side-by-side
Showing with 66 additions and 41 deletions
Documentation/input/alps.txt
View file @ ef47fa52
......@@ -3,8 +3,8 @@ ALPS Touchpad Protocol
Introduction
------------
Currently the ALPS touchpad driver supports five protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
Currently the ALPS touchpad driver supports seven protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
Since roughly mid-2010 several new ALPS touchpads have been released and
integrated into a variety of laptops and netbooks. These new touchpads
......@@ -240,3 +240,67 @@ For mt, the format is:
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
byte 5: 0 x16 x15 x14 x13 x12 x11 x10
ALPS Absolute Mode - Protocol Version 6
---------------------------------------
For trackstick packet, the format is:
byte 0: 1 1 1 1 1 1 1 1
byte 1: 0 X6 X5 X4 X3 X2 X1 X0
byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0
byte 3: ? Y7 X7 ? ? M R L
byte 4: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
byte 5: 0 1 1 1 1 1 1 1
For touchpad packet, the format is:
byte 0: 1 1 1 1 1 1 1 1
byte 1: 0 0 0 0 x3 x2 x1 x0
byte 2: 0 0 0 0 y3 y2 y1 y0
byte 3: ? x7 x6 x5 x4 ? r l
byte 4: ? y7 y6 y5 y4 ? ? ?
byte 5: z7 z6 z5 z4 z3 z2 z1 z0
(v6 touchpad does not have middle button)
ALPS Absolute Mode - Protocol Version 7
---------------------------------------
For trackstick packet, the format is:
byte 0: 0 1 0 0 1 0 0 0
byte 1: 1 1 * * 1 M R L
byte 2: X7 1 X5 X4 X3 X2 X1 X0
byte 3: Z6 1 Y6 X6 1 Y2 Y1 Y0
byte 4: Y7 0 Y5 Y4 Y3 1 1 0
byte 5: T&P 0 Z5 Z4 Z3 Z2 Z1 Z0
For touchpad packet, the format is:
packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
byte 0: TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
byte 0: NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
byte 1: Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
byte 2: X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
byte 3: X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
byte 4: TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
byte 4: MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
byte 4: NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
byte 5: TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
byte 5: MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
L: Left button
R / M: Non-clickpads: Right / Middle button
Clickpads: When > 2 fingers are down, and some fingers
are in the button area, then the 2 coordinates reported
are for fingers outside the button area and these report
extra fingers being present in the right / left button
area. Note these fingers are not added to the F field!
so if a TWO packet is received and R = 1 then there are
3 fingers down, etc.
TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
otherwise byte 0 bit 4 must be set and byte 0/4/5 are
in NEW fmt
F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
drivers/input/mouse/alps.c
View file @ ef47fa52
......@@ -909,34 +909,6 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
unsigned char *pkt,
unsigned char pkt_id)
{
/*
* packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
* Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
* Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
* Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
* Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
* Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
* Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
* Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
* Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
* Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
* Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
* L: Left button
* R / M: Non-clickpads: Right / Middle button
* Clickpads: When > 2 fingers are down, and some fingers
* are in the button area, then the 2 coordinates reported
* are for fingers outside the button area and these report
* extra fingers being present in the right / left button
* area. Note these fingers are not added to the F field!
* so if a TWO packet is received and R = 1 then there are
* 3 fingers down, etc.
* TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
* 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
* otherwise byte 0 bit 4 must be set and byte 0/4/5 are
* in NEW fmt
* F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
*/
mt[0].x = ((pkt[2] & 0x80) << 4);
mt[0].x |= ((pkt[2] & 0x3F) << 5);
mt[0].x |= ((pkt[3] & 0x30) >> 1);
......@@ -1061,17 +1033,6 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
return;
}
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* Byte0 0 1 0 0 1 0 0 0
* Byte1 1 1 * * 1 M R L
* Byte2 X7 1 X5 X4 X3 X2 X1 X0
* Byte3 Z6 1 Y6 X6 1 Y2 Y1 Y0
* Byte4 Y7 0 Y5 Y4 Y3 1 1 0
* Byte5 T&P 0 Z5 Z4 Z3 Z2 Z1 Z0
* M / R / L: Middle / Right / Left button
*/
x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2);
y = (packet[3] & 0x07) | (packet[4] & 0xb8) |
((packet[3] & 0x20) << 1);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7