staging: comedi: drivers: replace SDF_WRITEABLE with SDF_WRITABLE

As indicated in the comedi.h uapi header, SDF_WRITEABLE was a spelling
error in the API, SDF_WRITABLE is prefered.

For aesthetics, replace all the SDF_WRITEABLE uses with SDF_WRITABLE.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_1500.c

@@ -66,8 +66,7 @@ static int apci1500_auto_attach(struct comedi_device *dev,
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[1];
 	s->type = COMEDI_SUBD_DO;
-	s->subdev_flags =
-		SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 16;
 	s->maxdata = 1;
 	s->range_table = &range_digital;
@@ -78,7 +77,7 @@ static int apci1500_auto_attach(struct comedi_device *dev,
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[2];
 	s->type = COMEDI_SUBD_TIMER;
-	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 1;
 	s->maxdata = 0;
 	s->len_chanlist = 1;

drivers/staging/comedi/drivers/addi_apci_1516.c

@@ -163,7 +163,7 @@ static int apci1516_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[1];
 	if (this_board->do_nchan) {
 		s->type		= COMEDI_SUBD_DO;
-		s->subdev_flags	= SDF_WRITEABLE;
+		s->subdev_flags	= SDF_WRITABLE;
 		s->n_chan	= this_board->do_nchan;
 		s->maxdata	= 1;
 		s->range_table	= &range_digital;

drivers/staging/comedi/drivers/addi_apci_1564.c

@@ -403,7 +403,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 32;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -431,7 +431,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_TIMER;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 3;
 	s->maxdata	= 0;
 	s->range_table	= &range_digital;

drivers/staging/comedi/drivers/addi_apci_16xx.c

@@ -140,7 +140,7 @@ static int apci16xx_auto_attach(struct comedi_device *dev,
 	for (i = 0; i < n_subdevs; i++) {
 		s = &dev->subdevices[i];
 		s->type		= COMEDI_SUBD_DIO;
-		s->subdev_flags	= SDF_WRITEABLE | SDF_READABLE;
+		s->subdev_flags	= SDF_WRITABLE | SDF_READABLE;
 		s->n_chan	= ((i * 32) < board->n_chan) ? 32 : last;
 		s->maxdata	= 1;
 		s->range_table	= &range_digital;

drivers/staging/comedi/drivers/addi_apci_2032.c

@@ -267,7 +267,7 @@ static int apci2032_auto_attach(struct comedi_device *dev,
 	/* Initialize the digital output subdevice */
 	s = &dev->subdevices[0];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 32;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;

drivers/staging/comedi/drivers/addi_apci_2200.c

@@ -98,7 +98,7 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 	/* Initialize the digital output subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 16;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;

drivers/staging/comedi/drivers/addi_apci_3120.c

@@ -192,7 +192,7 @@ static int apci3120_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[1];
 	if (this_board->has_ao) {
 		s->type		= COMEDI_SUBD_AO;
-		s->subdev_flags	= SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+		s->subdev_flags	= SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan	= 8;
 		s->maxdata	= 0x3fff;
 		s->range_table	= &range_bipolar10;
@@ -218,7 +218,7 @@ static int apci3120_auto_attach(struct comedi_device *dev,
 	/* Digital Output subdevice */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 4;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -227,7 +227,7 @@ static int apci3120_auto_attach(struct comedi_device *dev,
 	/* Timer subdevice */
 	s = &dev->subdevices[4];
 	s->type		= COMEDI_SUBD_TIMER;
-	s->subdev_flags	= SDF_WRITEABLE | SDF_READABLE;
+	s->subdev_flags	= SDF_WRITABLE | SDF_READABLE;
 	s->n_chan	= 1;
 	s->maxdata	= 0x00ffffff;
 	s->insn_write	= apci3120_write_insn_timer;

drivers/staging/comedi/drivers/addi_apci_3501.c

@@ -357,7 +357,7 @@ static int apci3501_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[0];
 	if (ao_n_chan) {
 		s->type		= COMEDI_SUBD_AO;
-		s->subdev_flags	= SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+		s->subdev_flags	= SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan	= ao_n_chan;
 		s->maxdata	= 0x3fff;
 		s->range_table	= &apci3501_ao_range;
@@ -383,7 +383,7 @@ static int apci3501_auto_attach(struct comedi_device *dev,
 	/* Initialize the digital output subdevice */
 	s = &dev->subdevices[2];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 2;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -392,7 +392,7 @@ static int apci3501_auto_attach(struct comedi_device *dev,
 	/* Initialize the timer/watchdog subdevice */
 	s = &dev->subdevices[3];
 	s->type = COMEDI_SUBD_TIMER;
-	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 1;
 	s->maxdata = 0;
 	s->len_chanlist = 1;

drivers/staging/comedi/drivers/addi_apci_3xxx.c

@@ -849,7 +849,7 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
 	if (board->has_ao) {
 		s = &dev->subdevices[subdev];
 		s->type		= COMEDI_SUBD_AO;
-		s->subdev_flags	= SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+		s->subdev_flags	= SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan	= 4;
 		s->maxdata	= 0x0fff;
 		s->range_table	= &apci3xxx_ao_range;
@@ -880,7 +880,7 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
 	if (board->has_dig_out) {
 		s = &dev->subdevices[subdev];
 		s->type		= COMEDI_SUBD_DO;
-		s->subdev_flags	= SDF_WRITEABLE;
+		s->subdev_flags	= SDF_WRITABLE;
 		s->n_chan	= 4;
 		s->maxdata	= 1;
 		s->range_table	= &range_digital;
@@ -893,7 +893,7 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
 	if (board->has_ttl_io) {
 		s = &dev->subdevices[subdev];
 		s->type		= COMEDI_SUBD_DIO;
-		s->subdev_flags	= SDF_READABLE | SDF_WRITEABLE;
+		s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
 		s->n_chan	= 24;
 		s->maxdata	= 1;
 		s->io_bits	= 0xff;	/* channels 0-7 are always outputs */

drivers/staging/comedi/drivers/addi_watchdog.c

@@ -134,7 +134,7 @@ int addi_watchdog_init(struct comedi_subdevice *s, unsigned long iobase)
 	spriv->iobase = iobase;
 
 	s->type		= COMEDI_SUBD_TIMER;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 1;
 	s->maxdata	= 0xff;
 	s->insn_config	= addi_watchdog_insn_config;

drivers/staging/comedi/drivers/adv_pci1723.c

@@ -241,7 +241,7 @@ static int pci1723_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[0];
 	dev->write_subdev = s;
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags	= SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan	= 8;
 	s->maxdata	= 0xffff;
 	s->len_chanlist	= 8;

drivers/staging/comedi/drivers/c6xdigio.c

@@ -265,7 +265,7 @@ static int c6xdigio_attach(struct comedi_device *dev,
 	s = &dev->subdevices[0];
 	/* pwm output subdevice */
 	s->type		= COMEDI_SUBD_PWM;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 2;
 	s->maxdata	= 500;
 	s->range_table	= &range_unknown;

drivers/staging/comedi/drivers/comedi_test.c

@@ -423,7 +423,7 @@ static int waveform_attach(struct comedi_device *dev,
 	dev->write_subdev = s;
 	/* analog output subdevice (loopback) */
 	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
+	s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
 	s->n_chan = N_CHANS;
 	s->maxdata = 0xffff;
 	s->range_table = &waveform_ai_ranges;

drivers/staging/comedi/drivers/das6402.c

@@ -497,7 +497,7 @@ static int das6402_attach(struct comedi_device *dev,
 	/* Analog Output subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 2;
 	s->maxdata	= board->maxdata;
 	s->range_table	= &das6402_ao_ranges;
@@ -520,7 +520,7 @@ static int das6402_attach(struct comedi_device *dev,
 	/* Digital Input subdevice */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 8;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;

drivers/staging/comedi/drivers/dt9812.c

@@ -804,7 +804,7 @@ static int dt9812_auto_attach(struct comedi_device *dev,
 	/* Digital Output subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 8;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -822,7 +822,7 @@ static int dt9812_auto_attach(struct comedi_device *dev,
 	/* Analog Output subdevice */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 2;
 	s->maxdata	= 0x0fff;
 	s->range_table	= is_unipolar ? &range_unipolar2_5 : &range_bipolar10;

drivers/staging/comedi/drivers/gsc_hpdi.c

@@ -689,7 +689,7 @@ static int gsc_hpdi_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[0];
 	dev->read_subdev = s;
 	s->type		= COMEDI_SUBD_DIO;
-	s->subdev_flags	= SDF_READABLE | SDF_WRITEABLE | SDF_LSAMPL |
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL |
 			  SDF_CMD_READ;
 	s->n_chan	= 32;
 	s->len_chanlist	= 32;

drivers/staging/comedi/drivers/me4000.c

@@ -1421,7 +1421,7 @@ static int me4000_auto_attach(struct comedi_device *dev,
 
 	if (thisboard->ao_nchan) {
 		s->type = COMEDI_SUBD_AO;
-		s->subdev_flags = SDF_WRITEABLE | SDF_COMMON | SDF_GROUND;
+		s->subdev_flags = SDF_WRITABLE | SDF_COMMON | SDF_GROUND;
 		s->n_chan = thisboard->ao_nchan;
 		s->maxdata = 0xFFFF;	/*  16 bit DAC */
 		s->range_table = &range_bipolar10;

drivers/staging/comedi/drivers/me_daq.c

@@ -511,7 +511,7 @@ static int me_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[1];
 	if (board->has_ao) {
 		s->type		= COMEDI_SUBD_AO;
-		s->subdev_flags	= SDF_WRITEABLE | SDF_COMMON;
+		s->subdev_flags	= SDF_WRITABLE | SDF_COMMON;
 		s->n_chan	= 4;
 		s->maxdata	= 0x0fff;
 		s->len_chanlist	= 4;
@@ -528,7 +528,7 @@ static int me_auto_attach(struct comedi_device *dev,
 
 	s = &dev->subdevices[2];
 	s->type		= COMEDI_SUBD_DIO;
-	s->subdev_flags	= SDF_READABLE | SDF_WRITEABLE;
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
 	s->n_chan	= 32;
 	s->maxdata	= 1;
 	s->len_chanlist	= 32;

drivers/staging/comedi/drivers/ni_usb6501.c

@@ -561,7 +561,7 @@ static int ni6501_auto_attach(struct comedi_device *dev,
 	/* Counter subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_COUNTER;
-	s->subdev_flags	= SDF_READABLE | SDF_WRITEABLE | SDF_LSAMPL;
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
 	s->n_chan	= 1;
 	s->maxdata	= 0xffffffff;
 	s->insn_read	= ni6501_cnt_insn_read;

drivers/staging/comedi/drivers/quatech_daqp_cs.c

@@ -734,7 +734,7 @@ static int daqp_auto_attach(struct comedi_device *dev,
 
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 2;
 	s->maxdata	= 0x0fff;
 	s->range_table	= &range_bipolar5;
@@ -754,7 +754,7 @@ static int daqp_auto_attach(struct comedi_device *dev,
 
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 1;
 	s->maxdata	= 1;
 	s->insn_bits	= daqp_do_insn_bits;

drivers/staging/comedi/drivers/serial2002.c

@@ -742,7 +742,7 @@ static int serial2002_attach(struct comedi_device *dev,
 	/* digital output subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 0;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -760,7 +760,7 @@ static int serial2002_attach(struct comedi_device *dev,
 	/* analog output subdevice */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 0;
 	s->maxdata	= 1;
 	s->range_table	= NULL;

drivers/staging/comedi/drivers/vmk80xx.c

@@ -797,7 +797,7 @@ static int vmk80xx_init_subdevices(struct comedi_device *dev)
 	/* Analog output subdevice */
 	s = &dev->subdevices[1];
 	s->type		= COMEDI_SUBD_AO;
-	s->subdev_flags	= SDF_WRITEABLE | SDF_GROUND;
+	s->subdev_flags	= SDF_WRITABLE | SDF_GROUND;
 	s->n_chan	= boardinfo->ao_nchans;
 	s->maxdata	= 0x00ff;
 	s->range_table	= boardinfo->range;
@@ -819,7 +819,7 @@ static int vmk80xx_init_subdevices(struct comedi_device *dev)
 	/* Digital output subdevice */
 	s = &dev->subdevices[3];
 	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITEABLE;
+	s->subdev_flags	= SDF_WRITABLE;
 	s->n_chan	= 8;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
@@ -834,7 +834,7 @@ static int vmk80xx_init_subdevices(struct comedi_device *dev)
 	s->insn_read	= vmk80xx_cnt_insn_read;
 	s->insn_config	= vmk80xx_cnt_insn_config;
 	if (devpriv->model == VMK8055_MODEL) {
-		s->subdev_flags	|= SDF_WRITEABLE;
+		s->subdev_flags	|= SDF_WRITABLE;
 		s->insn_write	= vmk80xx_cnt_insn_write;
 	}
 
@@ -842,7 +842,7 @@ static int vmk80xx_init_subdevices(struct comedi_device *dev)
 	if (devpriv->model == VMK8061_MODEL) {
 		s = &dev->subdevices[5];
 		s->type		= COMEDI_SUBD_PWM;
-		s->subdev_flags	= SDF_READABLE | SDF_WRITEABLE;
+		s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
 		s->n_chan	= boardinfo->pwm_nchans;
 		s->maxdata	= boardinfo->pwm_maxdata;
 		s->insn_read	= vmk80xx_pwm_insn_read;