Commit f00d738f authored by Wolfgang Grandegger's avatar Wolfgang Grandegger Committed by Ben Dooks

i2c-mpc: add support for the MPC512x processors from Freescale

As I2C interrupts must  be enabled for the MPC512x by the setup function
as well, "fsl,preserve-clocking" is handled in a slighly different way.
Also, the old settings are now reported calling dev_dbg(). For the
MPC512x the clock setup function of the MPC52xx can be re-used.
Furthermore, the Kconfig help has been updated and corrected.
Signed-off-by: default avatarWolfgang Grandegger <wg@denx.de>
Reviewed-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent a9352211
......@@ -419,13 +419,12 @@ config I2C_IXP2000
instead.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx/86xx"
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
MPC85xx/MPC8641 family processors. The driver may also work on 52xx
family processors, though interrupts are known not to work.
built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
......
......@@ -31,6 +31,9 @@
#define DRV_NAME "mpc-i2c"
#define MPC_I2C_CLOCK_LEGACY 0
#define MPC_I2C_CLOCK_PRESERVE (~0U)
#define MPC_I2C_FDR 0x04
#define MPC_I2C_CR 0x08
#define MPC_I2C_SR 0x0c
......@@ -163,7 +166,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
#ifdef CONFIG_PPC_MPC52xx
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
......@@ -193,7 +196,7 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
u32 divider;
int i;
if (!clock)
if (clock == MPC_I2C_CLOCK_LEGACY)
return -EINVAL;
/* Determine divider value */
......@@ -221,6 +224,12 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
{
int ret, fdr;
if (clock == MPC_I2C_CLOCK_PRESERVE) {
dev_dbg(i2c->dev, "using fdr %d\n",
readb(i2c->base + MPC_I2C_FDR));
return;
}
ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
......@@ -229,13 +238,49 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
if (ret >= 0)
dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
#else /* !CONFIG_PPC_MPC52xx */
#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_PPC_MPC52xx*/
#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
#ifdef CONFIG_PPC_MPC512x
static void __devinit mpc_i2c_setup_512x(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
struct device_node *node_ctrl;
void __iomem *ctrl;
const u32 *pval;
u32 idx;
/* Enable I2C interrupts for mpc5121 */
node_ctrl = of_find_compatible_node(NULL, NULL,
"fsl,mpc5121-i2c-ctrl");
if (node_ctrl) {
ctrl = of_iomap(node_ctrl, 0);
if (ctrl) {
/* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
pval = of_get_property(node, "reg", NULL);
idx = (*pval & 0xff) / 0x20;
setbits32(ctrl, 1 << (24 + idx * 2));
iounmap(ctrl);
}
of_node_put(node_ctrl);
}
/* The clock setup for the 52xx works also fine for the 512x */
mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
}
#else /* CONFIG_PPC_MPC512x */
static void __devinit mpc_i2c_setup_512x(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_PPC_MPC512x */
#ifdef CONFIG_FSL_SOC
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
......@@ -294,7 +339,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
u32 divider;
int i;
if (!clock)
if (clock == MPC_I2C_CLOCK_LEGACY)
return -EINVAL;
/* Determine proper divider value */
......@@ -327,6 +372,13 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
{
int ret, fdr;
if (clock == MPC_I2C_CLOCK_PRESERVE) {
dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
readb(i2c->base + MPC_I2C_DFSRR),
readb(i2c->base + MPC_I2C_FDR));
return;
}
ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
......@@ -495,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
{
struct mpc_i2c *i2c;
const u32 *prop;
u32 clock = 0;
u32 clock = MPC_I2C_CLOCK_LEGACY;
int result = 0;
int plen;
......@@ -524,20 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
}
}
if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
clock = MPC_I2C_CLOCK_PRESERVE;
} else {
prop = of_get_property(op->node, "clock-frequency", &plen);
if (prop && plen == sizeof(u32))
clock = *prop;
}
if (match->data) {
struct mpc_i2c_data *data =
(struct mpc_i2c_data *)match->data;
data->setup(op->node, i2c, clock, data->prescaler);
} else {
/* Backwards compatibility */
if (of_get_property(op->node, "dfsrr", NULL))
mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
}
if (match->data) {
struct mpc_i2c_data *data = match->data;
data->setup(op->node, i2c, clock, data->prescaler);
} else {
/* Backwards compatibility */
if (of_get_property(op->node, "dfsrr", NULL))
mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
}
dev_set_drvdata(&op->dev, i2c);
......@@ -582,6 +635,10 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
return 0;
};
static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
.setup = mpc_i2c_setup_512x,
};
static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
.setup = mpc_i2c_setup_52xx,
};
......@@ -604,6 +661,7 @@ static const struct of_device_id mpc_i2c_of_match[] = {
{.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
{.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
{.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
{.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
{.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
{.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
{.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
......@@ -613,7 +671,6 @@ static const struct of_device_id mpc_i2c_of_match[] = {
};
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
/* Structure for a device driver */
static struct of_platform_driver mpc_i2c_driver = {
.match_table = mpc_i2c_of_match,
......@@ -646,5 +703,5 @@ module_exit(fsl_i2c_exit);
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
"MPC824x/85xx/52xx processors");
"MPC824x/83xx/85xx/86xx/512x/52xx processors");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment