dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus

Add spi based example.

Add spi-max-frequency property required by chip specifications.

Add additional maintainer.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231229092445.30180-4-petre.rodan@subdimension.roSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml

@@ -8,12 +8,12 @@ title: Honeywell mprls0025pa pressure sensor
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
 
 description: |
   Honeywell pressure sensor of model mprls0025pa.
 
-  This sensor has an I2C and SPI interface. Only the I2C interface is
-  implemented.
+  This sensor has an I2C and SPI interface.
 
   There are many models with different pressure ranges available. The vendor
   calls them "mpr series". All of them have the identical programming model and
@@ -86,6 +86,9 @@ properties:
     description:
       Maximum pressure value the sensor can measure in pascal.
 
+  spi-max-frequency:
+    maximum: 800000
+
   vdd-supply:
     description: provide VDD power to the sensor.
 
@@ -103,6 +106,7 @@ oneOf:
       - honeywell,pmax-pascal
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
   - if:
       required:
         - honeywell,pressure-triplet
@@ -133,3 +137,22 @@ examples:
             vdd-supply = <&vcc_3v3>;
         };
     };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+...