Skip to content

L
linux
Commit f09de60e authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

Merge branch 'omap-for-v4.15/fixes-dt' into omap-for-v4.15/ti-sysc

parents 10e998ff 160ec89a
Hide whitespace changes
Inline Side-by-side
Showing with 447 additions and 16 deletions
Documentation/devicetree/bindings/arm/omap/ctrl.txt
View file @ f09de60e
......@@ -21,6 +21,8 @@ Required properties:
"ti,omap3-scm"
"ti,omap4-scm-core"
"ti,omap4-scm-padconf-core"
"ti,omap4-scm-wkup"
"ti,omap4-scm-padconf-wkup"
"ti,omap5-scm-core"
"ti,omap5-scm-padconf-core"
"ti,dra7-scm-core"
......
Documentation/devicetree/bindings/bus/ti-sysc.txt 0 → 100644
View file @ f09de60e
Texas Instruments sysc interconnect target module wrapper binding
Texas Instruments SoCs can have a generic interconnect target module
hardware for devices connected to various interconnects such as L3
interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
is mostly used for interaction between module and PRCM. It participates
in the OCP Disconnect Protocol but other than that is mostly independent
of the interconnect.
Each interconnect target module can have one or more devices connected to
it. There is a set of control registers for managing interconnect target
module clocks, idle modes and interconnect level resets for the module.
These control registers are sprinkled into the unused register address
space of the first child device IP block managed by the interconnect
target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
Required standard properties:
- compatible shall be one of the following generic types:
"ti,sysc-omap2"
"ti,sysc-omap4"
"ti,sysc-omap4-simple"
or one of the following derivative types for hardware
needing special workarounds:
"ti,sysc-omap3430-sr"
"ti,sysc-omap3630-sr"
"ti,sysc-omap4-sr"
"ti,sysc-omap3-sham"
"ti,sysc-omap-aes"
"ti,sysc-mcasp"
"ti,sysc-usb-host-fs"
- reg shall have register areas implemented for the interconnect
target module in question such as revision, sysc and syss
- reg-names shall contain the register names implemented for the
interconnect target module in question such as
"rev, "sysc", and "syss"
- ranges shall contain the interconnect target module IO range
available for one or more child device IP blocks managed
by the interconnect target module, the ranges may include
multiple ranges such as device L4 range for control and
parent L3 range for DMA access
Optional properties:
- clocks clock specifier for each name in the clock-names as
specified in the binding documentation for ti-clkctrl,
typically available for all interconnect targets on TI SoCs
based on omap4 except if it's read-only register in hwauto
mode as for example omap4 L4_CFG_CLKCTRL
- clock-names should contain at least "fck", and optionally also "ick"
depending on the SoC and the interconnect target module
- ti,hwmods optional TI interconnect module name to use legacy
hwmod platform data
Example: Single instance of MUSB controller on omap4 using interconnect ranges
using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */
compatible = "ti,sysc-omap2";
ti,hwmods = "usb_otg_hs";
reg = <0x2b400 0x4>,
<0x2b404 0x4>,
<0x2b408 0x4>;
reg-names = "rev", "sysc", "syss";
clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2b000 0x1000>;
usb_otg_hs: otg@0 {
compatible = "ti,omap4-musb";
reg = <0x0 0x7ff>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
usb-phy = <&usb2_phy>;
...
};
};
Note that other SoCs, such as am335x can have multipe child devices. On am335x
there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
instance as children of a single interconnet target module.
Documentation/devicetree/bindings/hsi/omap-ssi.txt
View file @ f09de60e
OMAP SSI controller bindings
OMAP Synchronous Serial Interface (SSI) controller implements a legacy
variant of MIPI's High Speed Synchronous Serial Interface (HSI).
OMAP3's Synchronous Serial Interface (SSI) controller implements a
legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
while the controller found inside OMAP4 is supposed to be fully compliant
with the HSI standard.
Required properties:
- compatible: Should include "ti,omap3-ssi".
- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
- reg-names: Contains the values "sys" and "gdd" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
......@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
Required Port sub-node properties:
- compatible: Should be set to the following value
ti,omap3-ssi-port (applicable to OMAP34xx devices)
ti,omap4-hsi-port (applicable to OMAP44xx devices)
- reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
......@@ -38,6 +41,10 @@ Required Port sub-node properties:
property. If it's missing the port will not be
enabled.
Optional properties:
- ti,hwmods: Shall contain TI interconnect module name if needed
by the SoC
Example for Nokia N900:
ssi-controller@48058000 {
......
Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
View file @ f09de60e
......@@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it.
Required properties:
- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
is the IP revision of the specific EMIF instance.
For am437x should be ti,emif-am4372.
is the IP revision of the specific EMIF instance. For newer controllers,
compatible should be one of the following:
"ti,emif-am3352"
"ti,emif-am4372"
- phy-type : <u32> indicating the DDR phy type. Following are the
allowed values
......
Documentation/devicetree/bindings/power/ti-smartreflex.txt 0 → 100644
View file @ f09de60e
Texas Instruments SmartReflex binding
SmartReflex is used to set and adjust the SoC operating points.
Required properties:
compatible: Shall be one of the following:
"ti,omap3-smartreflex-core"
"ti,omap3-smartreflex-iva"
"ti,omap4-smartreflex-core"
"ti,omap4-smartreflex-mpu"
"ti,omap4-smartreflex-iva"
reg: Shall contain the device instance IO range
interrupts: Shall contain the device instance interrupt
Optional properties:
ti,hwmods: Shall contain the TI interconnect module name if needed
by the SoC
Example:
smartreflex_iva: smartreflex@4a0db000 {
compatible = "ti,omap4-smartreflex-iva";
reg = <0x4a0db000 0x80>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_iva";
};
smartreflex_core: smartreflex@4a0dd000 {
compatible = "ti,omap4-smartreflex-core";
reg = <0x4a0dd000 0x80>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_core";
};
smartreflex_mpu: smartreflex@4a0d9000 {
compatible = "ti,omap4-smartreflex-mpu";
reg = <0x4a0d9000 0x80>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_mpu";
};
arch/arm/boot/dts/am33xx.dtsi
View file @ f09de60e
......@@ -128,9 +128,11 @@ oppnitro-1000000000 {
};
};
pmu {
pmu@4b000000 {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
reg = <0x4b000000 0x1000000>;
ti,hwmods = "debugss";
};
/*
......@@ -927,6 +929,12 @@ am335x_adc: adc {
};
};
emif: emif@4c000000 {
compatible = "ti,emif-am3352";
reg = <0x4c000000 0x1000000>;
ti,hwmods = "emif";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
......
arch/arm/boot/dts/dra7.dtsi
View file @ f09de60e
......@@ -457,6 +457,7 @@ sdma: dma-controller@4a056000 {
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
edma: edma@43300000 {
......@@ -1069,6 +1070,13 @@ mmc1: mmc@4809c000 {
max-frequency = <192000000>;
};
hdqw1w: 1w@480b2000 {
compatible = "ti,omap3-1w";
reg = <0x480b2000 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "hdq1w";
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
......@@ -1489,6 +1497,32 @@ usb3_phy1: phy@4a084400 {
};
};
target-module@4a0dd000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_core";
reg = <0x4a0dd000 0x4>,
<0x4a0dd008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0dd000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
target-module@4a0d9000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_mpu";
reg = <0x4a0d9000 0x4>,
<0x4a0d9008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0d9000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
......
arch/arm/boot/dts/omap3.dtsi
View file @ f09de60e
......@@ -215,6 +215,7 @@ sdma: dma-controller@48056000 {
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <96>;
ti,hwmods = "dma";
};
gpio1: gpio@48310000 {
......
arch/arm/boot/dts/omap4.dtsi
View file @ f09de60e
......@@ -51,6 +51,17 @@ cpu@1 {
};
};
/*
* Note that 4430 needs cross trigger interface (CTI) supported
* before we can configure the interrupts. This means sampling
* events are not supported for pmu. Note that 4460 does not use
* CTI, see also 4460.dtsi.
*/
pmu {
compatible = "arm,cortex-a9-pmu";
ti,hwmods = "debugss";
};
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
......@@ -163,6 +174,7 @@ omap4_scm_core: scm@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x1000>;
ti,hwmods = "ctrl_module_core";
scm_conf: scm_conf@0 {
compatible = "syscon";
......@@ -175,9 +187,11 @@ scm_conf: scm_conf@0 {
omap4_padconf_core: scm@100000 {
compatible = "ti,omap4-scm-padconf-core",
"simple-bus";
reg = <0x100000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x100000 0x1000>;
ti,hwmods = "ctrl_module_pad_core";
omap4_pmx_core: pinmux@40 {
compatible = "ti,omap4-padconf",
......@@ -252,17 +266,33 @@ scrm_clockdomains: clockdomains {
};
};
omap4_pmx_wkup: pinmux@1e040 {
compatible = "ti,omap4-padconf",
"pinctrl-single";
reg = <0x1e040 0x0038>;
omap4_scm_wkup: scm@c000 {
compatible = "ti,omap4-scm-wkup";
reg = <0xc000 0x1000>;
ti,hwmods = "ctrl_module_wkup";
};
omap4_padconf_wkup: padconf@1e000 {
compatible = "ti,omap4-scm-padconf-wkup",
"simple-bus";
reg = <0x1e000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
#size-cells = <1>;
ranges = <0 0x1e000 0x1000>;
ti,hwmods = "ctrl_module_pad_wkup";
omap4_pmx_wkup: pinmux@40 {
compatible = "ti,omap4-padconf",
"pinctrl-single";
reg = <0x40 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
};
};
};
......@@ -282,6 +312,7 @@ sdma: dma-controller@4a056000 {
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
gpio1: gpio@4a310000 {
......@@ -351,6 +382,19 @@ gpio6: gpio@4805d000 {
#interrupt-cells = <2>;
};
target-module@48076000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "slimbus2";
reg = <0x48076000 0x4>,
<0x48076010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48076000 0x001000>;
/* No child device binding or driver in mainline */
};
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0x2000>;
......@@ -411,6 +455,57 @@ uart4: serial@4806e000 {
clock-frequency = <48000000>;
};
target-module@4a0db000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_iva";
reg = <0x4a0db000 0x4>,
<0x4a0db008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0db000 0x001000>;
smartreflex_iva: smartreflex@0 {
compatible = "ti,omap4-smartreflex-iva";
reg = <0 0x80>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
};
};
target-module@4a0dd000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_core";
reg = <0x4a0dd000 0x4>,
<0x4a0dd008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0dd000 0x001000>;
smartreflex_core: smartreflex@0 {
compatible = "ti,omap4-smartreflex-core";
reg = <0 0x80>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
};
};
target-module@4a0d9000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_mpu";
reg = <0x4a0d9000 0x4>,
<0x4a0d9008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0d9000 0x001000>;
smartreflex_mpu: smartreflex@0 {
compatible = "ti,omap4-smartreflex-mpu";
reg = <0 0x80>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
};
};
hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
......@@ -489,6 +584,13 @@ mcspi2: spi@4809a000 {
dma-names = "tx0", "rx0", "tx1", "rx1";
};
hdqw1w: 1w@480b2000 {
compatible = "ti,omap3-1w";
reg = <0x480b2000 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "hdq1w";
};
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
......@@ -565,6 +667,40 @@ mmc5: mmc@480d5000 {
dma-names = "tx", "rx";
};
hsi: hsi@4a058000 {
compatible = "ti,omap4-hsi";
reg = <0x4a058000 0x4000>,
<0x4a05c000 0x1000>;
reg-names = "sys", "gdd";
ti,hwmods = "hsi";
clocks = <&hsi_fck>;
clock-names = "hsi_fck";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gdd_mpu";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a058000 0x4000>;
hsi_port1: hsi-port@2000 {
compatible = "ti,omap4-hsi-port";
reg = <0x2000 0x800>,
<0x2800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
hsi_port2: hsi-port@3000 {
compatible = "ti,omap4-hsi-port";
reg = <0x3000 0x800>,
<0x3800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
};
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
......@@ -573,6 +709,19 @@ mmu_dsp: mmu@4a066000 {
#iommu-cells = <0>;
};
target-module@52000000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "iss";
reg = <0x52000000 0x4>,
<0x52000010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x52000000 0x1000000>;
/* No child device binding, driver in staging */
};
mmu_ipu: mmu@55082000 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
......@@ -589,6 +738,14 @@ wdt2: wdt@4a314000 {
ti,hwmods = "wd_timer2";
};
wdt3: wdt@40130000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
reg = <0x40130000 0x80>, /* MPU private access */
<0x49030000 0x80>; /* L3 Interconnect */
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer3";
};
mcpdm: mcpdm@40132000 {
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
......@@ -659,6 +816,56 @@ mcbsp3: mcbsp@40126000 {
status = "disabled";
};
target-module@40128000 {
compatible = "ti,sysc-mcasp";
ti,hwmods = "mcasp";
reg = <0x40128004 0x4>;
reg-names = "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
<0x49028000 0x49028000 0x1000>; /* L3 */
/*
* Child device unsupported by davinci-mcasp. At least
* TX path is disabled for omap4, and only DIT mode
* works with no I2S. See also old Android kernel
* omap-mcasp driver for more information.
*/
};
target-module@4012c000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "slimbus1";
reg = <0x4012c000 0x4>,
<0x4012c010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
<0x4902c000 0x4902c000 0x1000>; /* L3 */
/* No child device binding or driver in mainline */
};
target-module@401f1000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "aess";
reg = <0x401f1000 0x4>,
<0x401f1010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
<0x490f1000 0x490f1000 0x1000>; /* L3 */
/*
* No child device binding or driver in mainline.
* See Android tree and related upstreaming efforts
* for the old driver.
*/
};
mcbsp4: mcbsp@48096000 {
compatible = "ti,omap4-mcbsp";
reg = <0x48096000 0xff>; /* L4 Interconnect */
......@@ -747,6 +954,19 @@ mbox_dsp: mbox_dsp {
};
};
target-module@4a10a000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "fdif";
reg = <0x4a10a000 0x4>,
<0x4a10a010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a10a000 0x1000>;
/* No child device binding or driver in mainline */
};
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
......@@ -962,6 +1182,22 @@ abb_iva: regulator-abb-iva {
status = "disabled";
};
target-module@56000000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "gpu";
reg = <0x5601fc00 0x4>,
<0x5601fc10 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x2000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
dss: dss@58000000 {
compatible = "ti,omap4-dss";
reg = <0x58000000 0x80>;
......
arch/arm/boot/dts/omap5.dtsi
View file @ f09de60e
......@@ -295,6 +295,7 @@ sdma: dma-controller@4a056000 {
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
gpio1: gpio@4ae10000 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7