phy: pipe3: insert delay to enumerate in GEN2 mode

8-bit delay value (0xF1) is required for GEN2 devices to be enumerated
consistently. Added an API to be called from PHY drivers to set this delay
value and called it from PIPE3 driver to set the delay value.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: default avatarRoger Quadros <rogerq@ti.com>
parent 99bbd48c
......@@ -9,15 +9,17 @@ Required properties:
e.g. USB2_PHY on OMAP5.
"ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
e.g. USB3 PHY and SATA PHY on OMAP5.
"ti,control-phy-pcie" - for pcie to support external clock for pcie and to
set PCS delay value.
e.g. PCIE PHY in DRA7x
"ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
DRA7 platform.
"ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
AM437 platform.
- reg : Address and length of the register set for the device. It contains
the address of "otghs_control" for control-phy-otghs or "power" register
for other types.
- reg-names: should be "otghs_control" control-phy-otghs and "power" for
other types.
- reg : register ranges as listed in the reg-names property
- reg-names: "otghs_control" for control-phy-otghs
"power", "pcie_pcs" and "control_sma" for control-phy-pcie
"power" for all other types
omap_control_usb: omap-control-usb@4a002300 {
compatible = "ti,control-phy-otghs";
......
......@@ -26,6 +26,41 @@
#include <linux/clk.h>
#include <linux/phy/omap_control_phy.h>
/**
* omap_control_pcie_pcs - set the PCS delay count
* @dev: the control module device
* @id: index of the pcie PHY (should be 1 or 2)
* @delay: 8 bit delay value
*/
void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
{
u32 val;
struct omap_control_phy *control_phy;
if (IS_ERR(dev) || !dev) {
pr_err("%s: invalid device\n", __func__);
return;
}
control_phy = dev_get_drvdata(dev);
if (!control_phy) {
dev_err(dev, "%s: invalid control phy device\n", __func__);
return;
}
if (control_phy->type != OMAP_CTRL_TYPE_PCIE) {
dev_err(dev, "%s: unsupported operation\n", __func__);
return;
}
val = readl(control_phy->pcie_pcs);
val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
(id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT));
val |= delay << (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
writel(val, control_phy->pcie_pcs);
}
EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
/**
* omap_control_phy_power - power on/off the phy using control module reg
* @dev: the control module device
......@@ -61,6 +96,7 @@ void omap_control_phy_power(struct device *dev, int on)
val |= OMAP_CTRL_DEV_PHY_PD;
break;
case OMAP_CTRL_TYPE_PCIE:
case OMAP_CTRL_TYPE_PIPE3:
rate = clk_get_rate(control_phy->sys_clk);
rate = rate/1000000;
......@@ -211,6 +247,7 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE;
static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
......@@ -227,6 +264,10 @@ static const struct of_device_id omap_control_phy_id_table[] = {
.compatible = "ti,control-phy-pipe3",
.data = &pipe3_data,
},
{
.compatible = "ti,control-phy-pcie",
.data = &pcie_data,
},
{
.compatible = "ti,control-phy-usb2-dra7",
.data = &dra7usb2_data,
......@@ -279,7 +320,8 @@ static int omap_control_phy_probe(struct platform_device *pdev)
}
}
if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 ||
control_phy->type == OMAP_CTRL_TYPE_PCIE) {
control_phy->sys_clk = devm_clk_get(control_phy->dev,
"sys_clkin");
if (IS_ERR(control_phy->sys_clk)) {
......@@ -288,6 +330,14 @@ static int omap_control_phy_probe(struct platform_device *pdev)
}
}
if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pcie_pcs");
control_phy->pcie_pcs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(control_phy->pcie_pcs))
return PTR_ERR(control_phy->pcie_pcs);
}
dev_set_drvdata(control_phy->dev, control_phy);
return 0;
......
......@@ -217,8 +217,10 @@ static int ti_pipe3_init(struct phy *x)
u32 val;
int ret = 0;
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
omap_control_pcie_pcs(phy->control_dev, phy->id, 0xF1);
return 0;
}
/* Bring it out of IDLE if it is IDLE */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
......
......@@ -23,6 +23,7 @@ enum omap_control_phy_type {
OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
OMAP_CTRL_TYPE_PCIE, /* RX TX control of ACSPCIE */
OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
};
......@@ -33,6 +34,7 @@ struct omap_control_phy {
u32 __iomem *otghs_control;
u32 __iomem *power;
u32 __iomem *power_aux;
u32 __iomem *pcie_pcs;
struct clk *sys_clk;
......@@ -63,6 +65,9 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
#define OMAP_CTRL_PCIE_PCS_MASK 0xff
#define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT 0x8
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
#define AM437X_CTRL_USB2_PHY_PD BIT(0)
......@@ -74,6 +79,7 @@ enum omap_control_usb_mode {
void omap_control_phy_power(struct device *dev, int on);
void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay);
#else
static inline void omap_control_phy_power(struct device *dev, int on)
......@@ -84,6 +90,10 @@ static inline void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode)
{
}
static inline void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
{
}
#endif
#endif /* __OMAP_CONTROL_PHY_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment