Commit f118c0c3 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by Jesse Barnes

PCI: PCIe portdrv: Do not enable port device before setting up interrupts

The PCI Express port driver calls pci_enable_device() before setting
up interrupts, which is wrong, because if there is an interrupt pin
configured for the port, pci_enable_device() will likely set up an
interrupt link for it.  However, this shouldn't be done if either
MSI or MSI-X interrupt mode is chosen for the port.

The solution is to call pci_enable_device() after setting up
interrupts, because in that case the interrupt link won't be set up
if MSI or MSI-X are enabled.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 90e9cd50
......@@ -208,7 +208,7 @@ int pcie_port_device_probe(struct pci_dev *dev)
int pcie_port_device_register(struct pci_dev *dev)
{
struct pcie_port_data *port_data;
int status, capabilities, irq_mode, i;
int status, capabilities, irq_mode, i, nr_serv;
int vectors[PCIE_PORT_DEVICE_MAXSERVICES];
u16 reg16;
......@@ -229,24 +229,32 @@ int pcie_port_device_register(struct pci_dev *dev)
capabilities |= PCIE_PORT_SERVICE_PME;
irq_mode = assign_interrupt_mode(dev, vectors, capabilities);
if (irq_mode == PCIE_PORT_NO_IRQ) {
/*
* Don't use service devices that require interrupts if there is
* no way to generate them.
*/
if (!(capabilities & PCIE_PORT_SERVICE_VC)) {
status = -ENODEV;
goto Error;
}
capabilities = PCIE_PORT_SERVICE_VC;
}
port_data->port_irq_mode = irq_mode;
status = pci_enable_device(dev);
if (status)
goto Error;
pci_set_master(dev);
/* Allocate child services if any */
for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
for (i = 0, nr_serv = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
struct pcie_device *child;
int service = 1 << i;
if (!(capabilities & service))
continue;
/*
* Don't use service devices that require interrupts if there is
* no way to generate them.
*/
if (irq_mode == PCIE_PORT_NO_IRQ
&& service != PCIE_PORT_SERVICE_VC)
continue;
child = alloc_pcie_device(dev, service, vectors[i]);
if (!child)
continue;
......@@ -258,9 +266,19 @@ int pcie_port_device_register(struct pci_dev *dev)
}
get_device(&child->device);
nr_serv++;
}
if (!nr_serv) {
pci_disable_device(dev);
status = -ENODEV;
goto Error;
}
return 0;
Error:
kfree(port_data);
return status;
}
#ifdef CONFIG_PM
......
......@@ -82,18 +82,13 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
if (status)
return status;
if (pci_enable_device(dev) < 0)
return -ENODEV;
pci_set_master(dev);
if (!dev->irq && dev->pin) {
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
}
if (pcie_port_device_register(dev)) {
pci_disable_device(dev);
return -ENOMEM;
}
status = pcie_port_device_register(dev);
if (status)
return status;
pcie_portdrv_save_config(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment