Commit f1326973 authored by Erik Bosman's avatar Erik Bosman Committed by Ingo Molnar

generic, x86: add tests for prctl PR_GET_TSC and PR_SET_TSC

This patch adds three tests that test whether the PR_GET_TSC and
PR_SET_TSC commands have the desirable effect.

The tests check whether the control register is updated correctly
at context switches and try to discover bugs while enabling/disabling
the timestamp counter.
Signed-off-by: default avatarErik Bosman <ejbosman@cs.vu.nl>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 529e25f6
/*
* Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
*
* Tests if the control register is updated correctly
* at context switches
*
* Warning: this test will cause a very high load for a few seconds
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <inttypes.h>
#include <wait.h>
#include <sys/prctl.h>
#include <linux/prctl.h>
/* Get/set the process' ability to use the timestamp counter instruction */
#ifndef PR_GET_TSC
#define PR_GET_TSC 25
#define PR_SET_TSC 26
# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */
# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
#endif
uint64_t rdtsc() {
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
void sigsegv_expect(int sig)
{
/* */
}
void segvtask(void)
{
if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
{
perror("prctl");
exit(0);
}
signal(SIGSEGV, sigsegv_expect);
alarm(10);
rdtsc();
fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
exit(0);
}
void sigsegv_fail(int sig)
{
fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
exit(0);
}
void rdtsctask(void)
{
if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
{
perror("prctl");
exit(0);
}
signal(SIGSEGV, sigsegv_fail);
alarm(10);
for(;;) rdtsc();
}
int main(int argc, char **argv)
{
int n_tasks = 100, i;
fprintf(stderr, "[No further output means we're allright]\n");
for (i=0; i<n_tasks; i++)
if (fork() == 0)
{
if (i & 1)
segvtask();
else
rdtsctask();
}
for (i=0; i<n_tasks; i++)
wait(NULL);
exit(0);
}
/*
* Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
*
* Tests if the control register is updated correctly
* when set with prctl()
*
* Warning: this test will cause a very high load for a few seconds
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <inttypes.h>
#include <wait.h>
#include <sys/prctl.h>
#include <linux/prctl.h>
/* Get/set the process' ability to use the timestamp counter instruction */
#ifndef PR_GET_TSC
#define PR_GET_TSC 25
#define PR_SET_TSC 26
# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */
# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
#endif
/* snippet from wikipedia :-) */
uint64_t rdtsc() {
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
int should_segv = 0;
void sigsegv_cb(int sig)
{
if (!should_segv)
{
fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
exit(0);
}
if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
{
perror("prctl");
exit(0);
}
should_segv = 0;
rdtsc();
}
void task(void)
{
signal(SIGSEGV, sigsegv_cb);
alarm(10);
for(;;)
{
rdtsc();
if (should_segv)
{
fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
exit(0);
}
if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
{
perror("prctl");
exit(0);
}
should_segv = 1;
}
}
int main(int argc, char **argv)
{
int n_tasks = 100, i;
fprintf(stderr, "[No further output means we're allright]\n");
for (i=0; i<n_tasks; i++)
if (fork() == 0)
task();
for (i=0; i<n_tasks; i++)
wait(NULL);
exit(0);
}
/*
* Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
*
* Basic test to test behaviour of PR_GET_TSC and PR_SET_TSC
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <inttypes.h>
#include <sys/prctl.h>
#include <linux/prctl.h>
/* Get/set the process' ability to use the timestamp counter instruction */
#ifndef PR_GET_TSC
#define PR_GET_TSC 25
#define PR_SET_TSC 26
# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */
# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
#endif
const char *tsc_names[] =
{
[0] = "[not set]",
[PR_TSC_ENABLE] = "PR_TSC_ENABLE",
[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
};
uint64_t rdtsc() {
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
void sigsegv_cb(int sig)
{
int tsc_val = 0;
printf("[ SIG_SEGV ]\n");
printf("prctl(PR_GET_TSC, &tsc_val); ");
fflush(stdout);
if ( prctl(PR_GET_TSC, &tsc_val) == -1)
perror("prctl");
printf("tsc_val == %s\n", tsc_names[tsc_val]);
printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
fflush(stdout);
if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
perror("prctl");
printf("rdtsc() == ");
}
int main(int argc, char **argv)
{
int tsc_val = 0;
signal(SIGSEGV, sigsegv_cb);
printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
printf("prctl(PR_GET_TSC, &tsc_val); ");
fflush(stdout);
if ( prctl(PR_GET_TSC, &tsc_val) == -1)
perror("prctl");
printf("tsc_val == %s\n", tsc_names[tsc_val]);
printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
fflush(stdout);
if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
perror("prctl");
printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
printf("prctl(PR_SET_TSC, PR_TSC_SIGSEGV)\n");
fflush(stdout);
if ( prctl(PR_SET_TSC, PR_TSC_SIGSEGV) == -1)
perror("prctl");
printf("rdtsc() == ");
fflush(stdout);
printf("%llu\n", (unsigned long long)rdtsc());
fflush(stdout);
exit(EXIT_SUCCESS);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment