Commit f13a8c31 authored by Alex Elder's avatar Alex Elder Committed by David S. Miller

net: ipa: fix HOLB timer calculation

For IPA v4.2, the exact interpretation of the register that defines
the timeout for avoiding head-of-line blocking was a little unclear.
We're only assigning a 0 timeout to it right now, so that wasn't
very important.  But now that I know how it's supposed to work, I'm
fixing it.

The register represents a tick counter, where each tick is equal to
128 IPA core clock cycles.  For IPA v3.5.1, the register contains
a simple counter value.  But for IPA v4.2, the register contains two
fields, base and scale, which approximate the tick counter as:
    ticks = base << scale
The base and scale values to use for a given tick count are computed
using clever bit operations, and measures are taken to make the
resulting time period as close as possible to that requested.

There's no need for ipa_endpoint_init_hol_block_timer() to return
an error, so change its return type to void.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 78b348f3
......@@ -21,6 +21,7 @@
#include "ipa_modem.h"
#include "ipa_table.h"
#include "ipa_gsi.h"
#include "ipa_clock.h"
#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
......@@ -675,63 +676,70 @@ static void ipa_endpoint_init_aggr(struct ipa_endpoint *endpoint)
iowrite32(val, endpoint->ipa->reg_virt + offset);
}
/* A return value of 0 indicates an error */
/* The head-of-line blocking timer is defined as a tick count, where each
* tick represents 128 cycles of the IPA core clock. Return the value
* that should be written to that register that represents the timeout
* period provided.
*/
static u32 ipa_reg_init_hol_block_timer_val(struct ipa *ipa, u32 microseconds)
{
u32 width;
u32 scale;
u32 base;
u64 ticks;
u64 rate;
u32 high;
u32 val;
if (!microseconds)
return 0; /* invalid delay */
/* Timer is represented in units of clock ticks. */
if (ipa->version < IPA_VERSION_4_2)
return microseconds; /* XXX Needs to be computed */
/* IPA v4.2 represents the tick count as base * scale */
scale = 1; /* XXX Needs to be computed */
if (scale > field_max(SCALE_FMASK))
return 0; /* scale too big */
base = DIV_ROUND_CLOSEST(microseconds, scale);
if (base > field_max(BASE_VALUE_FMASK))
return 0; /* microseconds too big */
return 0; /* Nothing to compute if timer period is 0 */
/* Use 64 bit arithmetic to avoid overflow... */
rate = ipa_clock_rate(ipa);
ticks = DIV_ROUND_CLOSEST(microseconds * rate, 128 * USEC_PER_SEC);
/* ...but we still need to fit into a 32-bit register */
WARN_ON(ticks > U32_MAX);
/* IPA v3.5.1 just records the tick count */
if (ipa->version == IPA_VERSION_3_5_1)
return (u32)ticks;
/* For IPA v4.2, the tick count is represented by base and
* scale fields within the 32-bit timer register, where:
* ticks = base << scale;
* The best precision is achieved when the base value is as
* large as possible. Find the highest set bit in the tick
* count, and extract the number of bits in the base field
* such that that high bit is included.
*/
high = fls(ticks); /* 1..32 */
width = HWEIGHT32(BASE_VALUE_FMASK);
scale = high > width ? high - width : 0;
if (scale) {
/* If we're scaling, round up to get a closer result */
ticks += 1 << (scale - 1);
/* High bit was set, so rounding might have affected it */
if (fls(ticks) != high)
scale++;
}
val = u32_encode_bits(scale, SCALE_FMASK);
val |= u32_encode_bits(base, BASE_VALUE_FMASK);
val |= u32_encode_bits(ticks >> scale, BASE_VALUE_FMASK);
return val;
}
static int ipa_endpoint_init_hol_block_timer(struct ipa_endpoint *endpoint,
u32 microseconds)
/* If microseconds is 0, timeout is immediate */
static void ipa_endpoint_init_hol_block_timer(struct ipa_endpoint *endpoint,
u32 microseconds)
{
u32 endpoint_id = endpoint->endpoint_id;
struct ipa *ipa = endpoint->ipa;
u32 offset;
u32 val;
/* XXX We'll fix this when the register definition is clear */
if (microseconds) {
struct device *dev = &ipa->pdev->dev;
dev_err(dev, "endpoint %u non-zero HOLB period (ignoring)\n",
endpoint_id);
microseconds = 0;
}
if (microseconds) {
val = ipa_reg_init_hol_block_timer_val(ipa, microseconds);
if (!val)
return -EINVAL;
} else {
val = 0; /* timeout is immediate */
}
offset = IPA_REG_ENDP_INIT_HOL_BLOCK_TIMER_N_OFFSET(endpoint_id);
val = ipa_reg_init_hol_block_timer_val(ipa, microseconds);
iowrite32(val, ipa->reg_virt + offset);
return 0;
}
static void
......@@ -756,7 +764,7 @@ void ipa_endpoint_modem_hol_block_clear_all(struct ipa *ipa)
if (endpoint->toward_ipa || endpoint->ee_id != GSI_EE_MODEM)
continue;
(void)ipa_endpoint_init_hol_block_timer(endpoint, 0);
ipa_endpoint_init_hol_block_timer(endpoint, 0);
ipa_endpoint_init_hol_block_enable(endpoint, true);
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment