Commit f178c015 authored by AnilKumar Ch's avatar AnilKumar Ch Committed by Benoit Cousson

ARM: dts: AM33XX: Add memory resource to d_can node

Add a new address space/memory resource to d_can device tree node. D_CAN
RAM initialization is achieved through RAMINIT register which is part of
AM33XX control module address space. D_CAN RAM init or de-init should be
done by writing instance corresponding value to control module register.

Till we have a separate control module driver to write to control module,
d_can driver will handle the register writes to control module by itself.
So a new address space to represent this control module register is added
to d_can driver.
Signed-off-by: default avatarAnilKumar Ch <anilkumar@ti.com>
Acked-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarBenoit Cousson <benoit.cousson@linaro.org>
parent 7a57ee87
...@@ -227,7 +227,8 @@ wdt2: wdt@44e35000 { ...@@ -227,7 +227,8 @@ wdt2: wdt@44e35000 {
dcan0: d_can@481cc000 { dcan0: d_can@481cc000 {
compatible = "bosch,d_can"; compatible = "bosch,d_can";
ti,hwmods = "d_can0"; ti,hwmods = "d_can0";
reg = <0x481cc000 0x2000>; reg = <0x481cc000 0x2000
0x44e10644 0x4>;
interrupts = <52>; interrupts = <52>;
status = "disabled"; status = "disabled";
}; };
...@@ -235,7 +236,8 @@ dcan0: d_can@481cc000 { ...@@ -235,7 +236,8 @@ dcan0: d_can@481cc000 {
dcan1: d_can@481d0000 { dcan1: d_can@481d0000 {
compatible = "bosch,d_can"; compatible = "bosch,d_can";
ti,hwmods = "d_can1"; ti,hwmods = "d_can1";
reg = <0x481d0000 0x2000>; reg = <0x481d0000 0x2000
0x44e10644 0x4>;
interrupts = <55>; interrupts = <55>;
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment