Commit f21e5fa1 authored by Ben Skeggs's avatar Ben Skeggs Committed by Karol Herbst

drm/nouveau/disp/dp: add support for lttprs

Add support for Link-Training Tunable PHY Repeaters, required to support
higher bit rates on longer cables, as well as USB-C on certain docks and
laptops.
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
Reviewed-by: default avatarLyude Paul <lyude@redhat.com>
Signed-off-by: default avatarKarol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/17
parent 9543e3c0
......@@ -41,6 +41,10 @@
struct lt_state {
struct nvkm_dp *dp;
int repeaters;
int repeater;
u8 stat[6];
u8 conf[4];
bool pc2;
......@@ -52,11 +56,26 @@ static int
nvkm_dp_train_sense(struct lt_state *lt, bool pc, u32 delay)
{
struct nvkm_dp *dp = lt->dp;
u32 addr;
int ret;
usleep_range(delay, delay * 2);
ret = nvkm_rdaux(dp->aux, DPCD_LS02, lt->stat, 6);
if (lt->repeater)
addr = DPCD_LTTPR_LANE0_1_STATUS(lt->repeater);
else
addr = DPCD_LS02;
ret = nvkm_rdaux(dp->aux, addr, &lt->stat[0], 3);
if (ret)
return ret;
if (lt->repeater)
addr = DPCD_LTTPR_LANE0_1_ADJUST(lt->repeater);
else
addr = DPCD_LS06;
ret = nvkm_rdaux(dp->aux, addr, &lt->stat[4], 2);
if (ret)
return ret;
......@@ -82,6 +101,7 @@ nvkm_dp_train_drive(struct lt_state *lt, bool pc)
struct nvbios_dpout info;
struct nvbios_dpcfg ocfg;
u8 ver, hdr, cnt, len;
u32 addr;
u32 data;
int ret, i;
......@@ -110,6 +130,9 @@ nvkm_dp_train_drive(struct lt_state *lt, bool pc)
OUTP_TRACE(&dp->outp, "config lane %d %02x %02x",
i, lt->conf[i], lpc2);
if (lt->repeater != lt->repeaters)
continue;
data = nvbios_dpout_match(bios, dp->outp.info.hasht,
dp->outp.info.hashm,
&ver, &hdr, &cnt, &len, &info);
......@@ -126,7 +149,12 @@ nvkm_dp_train_drive(struct lt_state *lt, bool pc)
ocfg.pe, ocfg.tx_pu);
}
ret = nvkm_wraux(dp->aux, DPCD_LC03(0), lt->conf, 4);
if (lt->repeater)
addr = DPCD_LTTPR_LANE0_SET(lt->repeater);
else
addr = DPCD_LC03(0);
ret = nvkm_wraux(dp->aux, addr, lt->conf, 4);
if (ret)
return ret;
......@@ -143,12 +171,18 @@ static void
nvkm_dp_train_pattern(struct lt_state *lt, u8 pattern)
{
struct nvkm_dp *dp = lt->dp;
u32 addr;
u8 sink_tp;
OUTP_TRACE(&dp->outp, "training pattern %d", pattern);
dp->outp.ior->func->dp.pattern(dp->outp.ior, pattern);
nvkm_rdaux(dp->aux, DPCD_LC02, &sink_tp, 1);
if (lt->repeater)
addr = DPCD_LTTPR_PATTERN_SET(lt->repeater);
else
addr = DPCD_LC02;
nvkm_rdaux(dp->aux, addr, &sink_tp, 1);
sink_tp &= ~DPCD_LC02_TRAINING_PATTERN_SET;
sink_tp |= (pattern != 4) ? pattern : 7;
......@@ -156,16 +190,23 @@ nvkm_dp_train_pattern(struct lt_state *lt, u8 pattern)
sink_tp |= DPCD_LC02_SCRAMBLING_DISABLE;
else
sink_tp &= ~DPCD_LC02_SCRAMBLING_DISABLE;
nvkm_wraux(dp->aux, DPCD_LC02, &sink_tp, 1);
nvkm_wraux(dp->aux, addr, &sink_tp, 1);
}
static int
nvkm_dp_train_eq(struct lt_state *lt)
{
struct nvkm_i2c_aux *aux = lt->dp->aux;
bool eq_done = false, cr_done = true;
int tries = 0, usec = 0, i;
u8 data;
{
if (lt->repeater) {
if (!nvkm_rdaux(aux, DPCD_LTTPR_AUX_RD_INTERVAL(lt->repeater), &data, sizeof(data)))
usec = (data & DPCD_RC0E_AUX_RD_INTERVAL) * 4000;
nvkm_dp_train_pattern(lt, 4);
} else {
if (lt->dp->dpcd[DPCD_RC00_DPCD_REV] >= 0x14 &&
lt->dp->dpcd[DPCD_RC03] & DPCD_RC03_TPS4_SUPPORTED)
nvkm_dp_train_pattern(lt, 4);
......@@ -208,7 +249,7 @@ nvkm_dp_train_cr(struct lt_state *lt)
nvkm_dp_train_pattern(lt, 1);
if (lt->dp->dpcd[DPCD_RC00_DPCD_REV] < 0x14)
if (lt->dp->dpcd[DPCD_RC00_DPCD_REV] < 0x14 && !lt->repeater)
usec = (lt->dp->dpcd[DPCD_RC0E] & DPCD_RC0E_AUX_RD_INTERVAL) * 4000;
do {
......@@ -247,7 +288,7 @@ nvkm_dp_train_links(struct nvkm_dp *dp)
.dp = dp,
};
u32 lnkcmp;
u8 sink[2];
u8 sink[2], data;
int ret;
OUTP_DBG(&dp->outp, "training %d x %d MB/s",
......@@ -303,6 +344,20 @@ nvkm_dp_train_links(struct nvkm_dp *dp)
ior->func->dp.power(ior, ior->dp.nr);
/* Select LTTPR non-transparent mode if we have a valid configuration,
* use transparent mode otherwise.
*/
if (dp->lttpr[0] >= 0x14) {
data = DPCD_LTTPR_MODE_TRANSPARENT;
nvkm_wraux(dp->aux, DPCD_LTTPR_MODE, &data, sizeof(data));
if (dp->lttprs) {
data = DPCD_LTTPR_MODE_NON_TRANSPARENT;
nvkm_wraux(dp->aux, DPCD_LTTPR_MODE, &data, sizeof(data));
lt.repeaters = dp->lttprs;
}
}
/* Set desired link configuration on the sink. */
sink[0] = ior->dp.bw;
sink[1] = ior->dp.nr;
......@@ -314,11 +369,19 @@ nvkm_dp_train_links(struct nvkm_dp *dp)
return ret;
/* Attempt to train the link in this configuration. */
memset(lt.stat, 0x00, sizeof(lt.stat));
ret = nvkm_dp_train_cr(&lt);
if (ret == 0)
ret = nvkm_dp_train_eq(&lt);
nvkm_dp_train_pattern(&lt, 0);
for (lt.repeater = lt.repeaters; lt.repeater >= 0; lt.repeater--) {
if (lt.repeater)
OUTP_DBG(&dp->outp, "training LTTPR%d", lt.repeater);
else
OUTP_DBG(&dp->outp, "training sink");
memset(lt.stat, 0x00, sizeof(lt.stat));
ret = nvkm_dp_train_cr(&lt);
if (ret == 0)
ret = nvkm_dp_train_eq(&lt);
nvkm_dp_train_pattern(&lt, 0);
}
return ret;
}
......@@ -501,6 +564,29 @@ nvkm_dp_enable(struct nvkm_dp *dp, bool enable)
dp->present = true;
}
/* Detect any LTTPRs before reading DPCD receiver caps. */
if (!nvkm_rdaux(aux, DPCD_LTTPR_REV, dp->lttpr, sizeof(dp->lttpr)) &&
dp->lttpr[0] >= 0x14 && dp->lttpr[2]) {
switch (dp->lttpr[2]) {
case 0x80: dp->lttprs = 1; break;
case 0x40: dp->lttprs = 2; break;
case 0x20: dp->lttprs = 3; break;
case 0x10: dp->lttprs = 4; break;
case 0x08: dp->lttprs = 5; break;
case 0x04: dp->lttprs = 6; break;
case 0x02: dp->lttprs = 7; break;
case 0x01: dp->lttprs = 8; break;
default:
/* Unknown LTTPR count, we'll switch to transparent mode. */
WARN_ON(1);
dp->lttprs = 0;
break;
}
} else {
/* No LTTPR support, or zero LTTPR count - don't touch it at all. */
memset(dp->lttpr, 0x00, sizeof(dp->lttpr));
}
if (!nvkm_rdaux(aux, DPCD_RC00_DPCD_REV, dp->dpcd, sizeof(dp->dpcd))) {
const u8 rates[] = { 0x14, 0x0a, 0x06, 0 };
const u8 *rate;
......@@ -509,9 +595,13 @@ nvkm_dp_enable(struct nvkm_dp *dp, bool enable)
dp->rates = 0;
dp->links = dp->dpcd[DPCD_RC02] & DPCD_RC02_MAX_LANE_COUNT;
dp->links = min(dp->links, dp->outp.info.dpconf.link_nr);
if (dp->lttprs && dp->lttpr[4])
dp->links = min_t(int, dp->links, dp->lttpr[4]);
rate_max = dp->dpcd[DPCD_RC01_MAX_LINK_RATE];
rate_max = min(rate_max, dp->outp.info.dpconf.link_bw);
if (dp->lttprs && dp->lttpr[1])
rate_max = min_t(int, rate_max, dp->lttpr[1]);
if (1) {
for (rate = rates; *rate; rate++) {
......
......@@ -18,6 +18,8 @@ struct nvkm_dp {
struct nvkm_notify hpd;
bool present;
u8 lttpr[6];
u8 lttprs;
u8 dpcd[16];
struct {
......@@ -114,4 +116,14 @@ void nvkm_dp_disable(struct nvkm_outp *, struct nvkm_ior *);
#define DPCD_SC00_SET_POWER 0x03
#define DPCD_SC00_SET_POWER_D0 0x01
#define DPCD_SC00_SET_POWER_D3 0x03
#define DPCD_LTTPR_REV 0xf0000
#define DPCD_LTTPR_MODE 0xf0003
#define DPCD_LTTPR_MODE_TRANSPARENT 0x55
#define DPCD_LTTPR_MODE_NON_TRANSPARENT 0xaa
#define DPCD_LTTPR_PATTERN_SET(i) ((i - 1) * 0x50 + 0xf0010)
#define DPCD_LTTPR_LANE0_SET(i) ((i - 1) * 0x50 + 0xf0011)
#define DPCD_LTTPR_AUX_RD_INTERVAL(i) ((i - 1) * 0x50 + 0xf0020)
#define DPCD_LTTPR_LANE0_1_STATUS(i) ((i - 1) * 0x50 + 0xf0030)
#define DPCD_LTTPR_LANE0_1_ADJUST(i) ((i - 1) * 0x50 + 0xf0033)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment