Commit f2a9eb97 authored by Bjorn Andersson's avatar Bjorn Andersson Committed by Mark Brown

regulator: fan53555: Add support for FAN53526

The FAN53526 differs from the FAN53555 only in that the mode bit in
VSEL0/VSEL1 is moved to the CONTROL register, the voltage selector mask
is extended by 1 bit and the step is different.

So extend the existing fan53555 driver to support FAN53526 as well.
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 606640bb
Binding for Fairchild FAN53555 regulators
Required properties:
- compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
- compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
"silergy,syr828"
- reg: I2C address
Optional properties:
......
......@@ -40,7 +40,6 @@
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
#define VSEL_NSEL_MASK 0x3F
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
......@@ -49,14 +48,26 @@
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
#define CTL_MODE_VSEL0_MODE BIT(0)
#define CTL_MODE_VSEL1_MODE BIT(1)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
#define FAN53526_NVOLTAGES 128
enum fan53555_vendor {
FAN53555_VENDOR_FAIRCHILD = 0,
FAN53526_VENDOR_FAIRCHILD = 0,
FAN53555_VENDOR_FAIRCHILD,
FAN53555_VENDOR_SILERGY,
};
enum {
FAN53526_CHIP_ID_01 = 1,
};
enum {
FAN53526_CHIP_REV_08 = 8,
};
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
......@@ -94,8 +105,12 @@ struct fan53555_device_info {
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
/* Voltage slew rate limiting */
unsigned int slew_rate;
/* Mode */
unsigned int mode_reg;
unsigned int mode_mask;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
};
......@@ -111,7 +126,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
if (ret < 0)
return ret;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
VSEL_NSEL_MASK, ret);
di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
/* Cache the sleep voltage setting.
......@@ -143,11 +158,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(di->regmap, di->vol_reg,
VSEL_MODE, VSEL_MODE);
regmap_update_bits(di->regmap, di->mode_reg,
di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
......@@ -161,10 +176,10 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;
ret = regmap_read(di->regmap, di->vol_reg, &val);
ret = regmap_read(di->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
if (val & VSEL_MODE)
if (val & di->mode_mask)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
......@@ -219,6 +234,34 @@ static const struct regulator_ops fan53555_regulator_ops = {
.set_suspend_disable = fan53555_set_suspend_disable,
};
static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53526_CHIP_ID_01:
switch (di->chip_rev) {
case FAN53526_CHIP_REV_08:
di->vsel_min = 600000;
di->vsel_step = 6250;
break;
default:
dev_err(di->dev,
"Chip ID %d with rev %d not supported!\n",
di->chip_id, di->chip_rev);
return -EINVAL;
}
break;
default:
dev_err(di->dev,
"Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
di->vsel_count = FAN53526_NVOLTAGES;
return 0;
}
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
......@@ -257,6 +300,8 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
return -EINVAL;
}
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
......@@ -274,6 +319,8 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
return -EINVAL;
}
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
......@@ -302,7 +349,35 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
return -EINVAL;
}
/* Setup mode control register */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
di->mode_reg = FAN53555_CONTROL;
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->mode_mask = CTL_MODE_VSEL1_MODE;
break;
case FAN53555_VSEL_ID_1:
di->mode_mask = CTL_MODE_VSEL0_MODE;
break;
}
break;
case FAN53555_VENDOR_FAIRCHILD:
case FAN53555_VENDOR_SILERGY:
di->mode_reg = di->vol_reg;
di->mode_mask = VSEL_MODE;
break;
default:
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
return -EINVAL;
}
/* Setup voltage range */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
ret = fan53526_voltages_setup_fairchild(di);
break;
case FAN53555_VENDOR_FAIRCHILD:
ret = fan53555_voltages_setup_fairchild(di);
break;
......@@ -326,13 +401,13 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->supply_name = "vin";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = FAN53555_NVOLTAGES;
rdesc->n_voltages = di->vsel_count;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
rdesc->vsel_mask = VSEL_NSEL_MASK;
rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;
di->rdev = devm_regulator_register(di->dev, &di->desc, config);
......@@ -368,6 +443,9 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
static const struct of_device_id fan53555_dt_ids[] = {
{
.compatible = "fcs,fan53526",
.data = (void *)FAN53526_VENDOR_FAIRCHILD,
}, {
.compatible = "fcs,fan53555",
.data = (void *)FAN53555_VENDOR_FAIRCHILD
}, {
......@@ -467,6 +545,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
static const struct i2c_device_id fan53555_id[] = {
{
.name = "fan53526",
.driver_data = FAN53526_VENDOR_FAIRCHILD
}, {
.name = "fan53555",
.driver_data = FAN53555_VENDOR_FAIRCHILD
}, {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment