Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "In this set, we have:
   - Refactoring of some of the old StrongARM-1100 GPIO code to make
     things simpler by Dmitry Eremin-Solenikov
   - Read-only and non-executable support for modules on ARM from Laura
     Abbot
   - Removal of unnecessary set_drvdata() calls in AMBA code
   - Some non-executable support for kernel lowmem mappings at the 1MB
     section granularity, and dumping of kernel page tables via debugfs
   - Some improvements for the timer/clock code on Footbridge platforms,
     and cleanup some of the LED code there
   - Fix fls/ffs() signatures to match x86 to prevent build warnings,
     particularly where these are used with min/max() macros
   - Avoid using the bootmem allocator on ARM (patches from Santosh
     Shilimkar)
   - Various asid/unaligned access updates from Will Deacon"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (51 commits)
  ARM: SMP implementations are not supposed to return from smp_ops.cpu_die()
  ARM: ignore memory below PHYS_OFFSET
  Fix select-induced Kconfig warning for ZBOOT_ROM
  ARM: fix ffs/fls implementations to match x86
  ARM: 7935/1: sa1100: collie: add gpio-keys configuration
  ARM: 7932/1: bcm: Add DEBUG_LL console support
  ARM: 7929/1: Remove duplicate SCHED_HRTICK config option
  ARM: 7928/1: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU
  ARM: 7927/1: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs
  ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator
  ARM: 7925/1: mm: keep track of last ASID allocation to improve bitmap searching
  ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE
  ARM: PCI: add legacy IDE IRQ implementation
  ARM: footbridge: cleanup LEDs code
  ARM: pgd allocation: retry on failure
  ARM: footbridge: add one-shot mode for DC21285 timer
  ARM: footbridge: add sched_clock implementation
  ARM: 7922/1: l2x0: add Marvell Tauros3 support
  ARM: 7877/1: use built-in byte swap function
  ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev
  ...

Documentation/devicetree/bindings/arm/l2cc.txt

@@ -7,20 +7,21 @@ The ARM L2 cache representation in the device tree should be done as follows:
 Required properties:
 
 - compatible : should be one of:
-	"arm,pl310-cache"
-	"arm,l220-cache"
-	"arm,l210-cache"
-	"marvell,aurora-system-cache": Marvell Controller designed to be
+  "arm,pl310-cache"
+  "arm,l220-cache"
+  "arm,l210-cache"
+  "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+  "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
+     offset needs to be added to the address before passing down to the L2
+     cache controller
+  "marvell,aurora-system-cache": Marvell Controller designed to be
      compatible with the ARM one, with system cache mode (meaning
      maintenance operations on L1 are broadcasted to the L2 and L2
      performs the same operation).
-	"marvell,"aurora-outer-cache: Marvell Controller designed to be
-	 compatible with the ARM one with outer cache mode.
-	"brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
-	offset needs to be added to the address before passing down to the L2
-	cache controller
-	"bcm,bcm11351-a2-pl310-cache": DEPRECATED by
-	                               "brcm,bcm11351-a2-pl310-cache"
+  "marvell,aurora-outer-cache": Marvell Controller designed to be
+     compatible with the ARM one with outer cache mode.
+  "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible
+     with arm,pl310-cache controller.
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped

arch/arm/Kconfig

@@ -6,12 +6,13 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT if MMU
 	select CLONE_BACKWARDS
 	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
+	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_IDLE_POLL_SETUP
@@ -36,6 +37,7 @@ config ARM
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
@@ -63,6 +65,7 @@ config ARM
 	select IRQ_FORCED_THREADING
 	select KTIME_SCALAR
 	select MODULES_USE_ELF_REL
+	select NO_BOOTMEM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
@@ -1651,9 +1654,6 @@ config HZ
 config SCHED_HRTICK
 	def_bool HIGH_RES_TIMERS
 
-config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS
-
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
@@ -1934,6 +1934,7 @@ config ZBOOT_ROM_BSS
 config ZBOOT_ROM
 	bool "Compressed boot loader in ROM/flash"
 	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+	depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
 	help
 	  Say Y here if you intend to execute your compressed kernel image
 	  (zImage) directly from ROM or flash.  If unsure, say N.
@@ -1969,7 +1970,7 @@ endchoice
 
 config ARM_APPENDED_DTB
 	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
-	depends on OF && !ZBOOT_ROM
+	depends on OF
 	help
 	  With this option, the boot code will look for a device tree binary
 	  (DTB) appended to zImage
@@ -2057,7 +2058,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2120,7 +2121,6 @@ config CRASH_DUMP
 
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
-	depends on !ZBOOT_ROM
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address

arch/arm/Kconfig.debug

@@ -2,6 +2,18 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config ARM_PTDUMP
+	bool "Export kernel pagetable layout to userspace via debugfs"
+	depends on DEBUG_KERNEL
+	select DEBUG_FS
+	---help---
+	  Say Y here if you want to show the kernel pagetable layout in a
+	  debugfs file. This information is only useful for kernel developers
+	  who are working in architecture specific areas of the kernel.
+	  It is probably not a good idea to enable this feature in a production
+	  kernel.
+	  If in doubt, say "N"
+
 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
 	depends on MMU
@@ -94,6 +106,17 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_KONA_UART
+		bool "Kernel low-level debugging messages via BCM KONA UART"
+		depends on ARCH_BCM
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Broadcom SoC platforms.
+		  This low level debug works for Broadcom
+		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
+		  bcm11351, etc...)
+
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -988,6 +1011,7 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
@@ -1049,6 +1073,7 @@ config DEBUG_UART_VIRT
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default 0xfe230000 if DEBUG_PICOXCELL_UART
+	default 0xfe300000 if DEBUG_BCM_KONA_UART
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
@@ -1091,7 +1116,8 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
 		ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
+		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+		DEBUG_BCM_KONA_UART
 
 config DEBUG_UART_8250_FLOW_CONTROL
 	bool "Enable flow control for 8250 UART"
@@ -1150,4 +1176,15 @@ config PID_IN_CONTEXTIDR
 	  additional instructions during context switch. Say Y here only if you
 	  are planning to use hardware trace tools with this kernel.
 
+config DEBUG_SET_MODULE_RONX
+	bool "Set loadable kernel module data as NX and text as RO"
+	depends on MODULES
+	---help---
+	  This option helps catch unintended modifications to loadable
+	  kernel module's text and read-only data. It also prevents execution
+	  of module data. Such protection may interfere with run-time code
+	  patching and dynamic kernel tracing - and they might also protect
+	  against certain classes of kernel exploits.
+	  If in doubt, say "N".
+
 endmenu

arch/arm/boot/compressed/Makefile

@@ -108,12 +108,12 @@ endif
 
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
-		 font.o font.c head.o misc.o $(OBJS)
+		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
+		 bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
 
 # Make sure files are removed during clean
 extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
-		 lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \
+		 lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
 		 hyp-stub.S
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
@@ -156,6 +156,12 @@ ashldi3 = $(obj)/ashldi3.o
 $(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
 	$(call cmd,shipped)
 
+# For __bswapsi2, __bswapdi2
+bswapsdi2 = $(obj)/bswapsdi2.o
+
+$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
+	$(call cmd,shipped)
+
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -177,7 +183,8 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 fi
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
+		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
+		$(bswapsdi2) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)

arch/arm/common/mcpm_entry.c

@@ -35,8 +35,7 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
 	unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
 	poke[0] = poke_phys_addr;
 	poke[1] = poke_val;
-	__cpuc_flush_dcache_area((void *)poke, 8);
-	outer_clean_range(__pa(poke), __pa(poke + 2));
+	__sync_cache_range_w(poke, 2 * sizeof(*poke));
 }
 
 static const struct mcpm_platform_ops *platform_ops;
@@ -167,7 +166,7 @@ void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
 	dmb();
 	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
 	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
-	dsb_sev();
+	sev();
 }
 
 /*
@@ -183,7 +182,7 @@ void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
 	dmb();
 	mcpm_sync.clusters[cluster].cluster = state;
 	sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
-	dsb_sev();
+	sev();
 }
 
 /*

arch/arm/include/asm/bitops.h

@@ -254,25 +254,59 @@ static inline int constant_fls(int x)
 }
 
 /*
- * On ARMv5 and above those functions can be implemented around
- * the clz instruction for much better code efficiency.
+ * On ARMv5 and above those functions can be implemented around the
+ * clz instruction for much better code efficiency.  __clz returns
+ * the number of leading zeros, zero input will return 32, and
+ * 0x80000000 will return 0.
  */
+static inline unsigned int __clz(unsigned int x)
+{
+	unsigned int ret;
+
+	asm("clz\t%0, %1" : "=r" (ret) : "r" (x));
 
+	return ret;
+}
+
+/*
+ * fls() returns zero if the input is zero, otherwise returns the bit
+ * position of the last set bit, where the LSB is 1 and MSB is 32.
+ */
 static inline int fls(int x)
 {
-	int ret;
-
 	if (__builtin_constant_p(x))
 	       return constant_fls(x);
 
-	asm("clz\t%0, %1" : "=r" (ret) : "r" (x));
-       	ret = 32 - ret;
-	return ret;
+	return 32 - __clz(x);
+}
+
+/*
+ * __fls() returns the bit position of the last bit set, where the
+ * LSB is 0 and MSB is 31.  Zero input is undefined.
+ */
+static inline unsigned long __fls(unsigned long x)
+{
+	return fls(x) - 1;
+}
+
+/*
+ * ffs() returns zero if the input was zero, otherwise returns the bit
+ * position of the first set bit, where the LSB is 1 and MSB is 32.
+ */
+static inline int ffs(int x)
+{
+	return fls(x & -x);
+}
+
+/*
+ * __ffs() returns the bit position of the first bit set, where the
+ * LSB is 0 and MSB is 31.  Zero input is undefined.
+ */
+static inline unsigned long __ffs(unsigned long x)
+{
+	return ffs(x) - 1;
 }
 
-#define __fls(x) (fls(x) - 1)
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
 #define ffz(x) __ffs( ~(x) )
 
 #endif

arch/arm/include/asm/cacheflush.h

@@ -481,4 +481,9 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
 	      "r9","r10","lr","memory" )
 
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+
 #endif

arch/arm/include/asm/checksum.h

@@ -87,19 +87,33 @@ static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
-	__asm__(
-	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
-	adcs	%0, %0, %3					\n"
+	u32 lenprot = len | proto << 16;
+	if (__builtin_constant_p(sum) && sum == 0) {
+		__asm__(
+		"adds	%0, %1, %2	@ csum_tcpudp_nofold0	\n\t"
 #ifdef __ARMEB__
-	"adcs	%0, %0, %4					\n"
+		"adcs	%0, %0, %3				\n\t"
 #else
-	"adcs	%0, %0, %4, lsl #8				\n"
+		"adcs	%0, %0, %3, ror #8			\n\t"
 #endif
-	"adcs	%0, %0, %5					\n\
-	adc	%0, %0, #0"
-	: "=&r"(sum)
-	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
-	: "cc");
+		"adc	%0, %0, #0"
+		: "=&r" (sum)
+		: "r" (daddr), "r" (saddr), "r" (lenprot)
+		: "cc");
+	} else {
+		__asm__(
+		"adds	%0, %1, %2	@ csum_tcpudp_nofold	\n\t"
+		"adcs	%0, %0, %3				\n\t"
+#ifdef __ARMEB__
+		"adcs	%0, %0, %4				\n\t"
+#else
+		"adcs	%0, %0, %4, ror #8			\n\t"
+#endif
+		"adc	%0, %0, #0"
+		: "=&r"(sum)
+		: "r" (sum), "r" (daddr), "r" (saddr), "r" (lenprot)
+		: "cc");
+	}
 	return sum;
 }	
 /*

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -131,6 +131,7 @@ struct l2x0_regs {
 	unsigned long prefetch_ctrl;
 	unsigned long pwr_ctrl;
 	unsigned long ctrl;
+	unsigned long aux2_ctrl;
 };
 
 extern struct l2x0_regs l2x0_saved_regs;

arch/arm/include/asm/mach/map.h

@@ -22,18 +22,21 @@ struct map_desc {
 };
 
 /* types 0-3 are defined in asm/io.h */
-#define MT_UNCACHED		4
-#define MT_CACHECLEAN		5
-#define MT_MINICLEAN		6
-#define MT_LOW_VECTORS		7
-#define MT_HIGH_VECTORS		8
-#define MT_MEMORY		9
-#define MT_ROM			10
-#define MT_MEMORY_NONCACHED	11
-#define MT_MEMORY_DTCM		12
-#define MT_MEMORY_ITCM		13
-#define MT_MEMORY_SO		14
-#define MT_MEMORY_DMA_READY	15
+enum {
+	MT_UNCACHED = 4,
+	MT_CACHECLEAN,
+	MT_MINICLEAN,
+	MT_LOW_VECTORS,
+	MT_HIGH_VECTORS,
+	MT_MEMORY_RWX,
+	MT_MEMORY_RW,
+	MT_ROM,
+	MT_MEMORY_RWX_NONCACHED,
+	MT_MEMORY_RW_DTCM,
+	MT_MEMORY_RWX_ITCM,
+	MT_MEMORY_RW_SO,
+	MT_MEMORY_DMA_READY,
+};
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);

arch/arm/include/asm/pci.h

@@ -57,12 +57,9 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
                                enum pci_mmap_state mmap_state, int write_combine);
 
-/*
- * Dummy implementation; always return 0.
- */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
-	return 0;
+	return channel ? 15 : 14;
 }
 
 #endif /* __KERNEL__ */

arch/arm/include/asm/pgtable-2level.h

@@ -160,6 +160,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 	return (pmd_t *)pud;
 }
 
+#define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
 
 #define copy_pmd(pmdpd,pmdps)		\

arch/arm/include/asm/pgtable-3level.h

@@ -142,6 +142,7 @@
 						 PMD_TYPE_TABLE)
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 						 PMD_TYPE_SECT)
+#define pmd_large(pmd)		pmd_sect(pmd)
 
 #define pud_clear(pudp)			\
 	do {				\

arch/arm/include/asm/pgtable.h

@@ -254,6 +254,8 @@ PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
 PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
 PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
 PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
+PTE_BIT_FUNC(mkexec,   &= ~L_PTE_XN);
+PTE_BIT_FUNC(mknexec,   |= L_PTE_XN);
 
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 

arch/arm/include/asm/word-at-a-time.h

@@ -48,10 +48,14 @@ static inline unsigned long find_zero(unsigned long mask)
 	return ret;
 }
 
-#ifdef CONFIG_DCACHE_WORD_ACCESS
-
 #define zero_bytemask(mask) (mask)
 
+#else	/* __ARMEB__ */
+#include <asm-generic/word-at-a-time.h>
+#endif
+
+#ifdef CONFIG_DCACHE_WORD_ACCESS
+
 /*
  * Load an unaligned word from kernel space.
  *
@@ -73,7 +77,11 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"	bic	%2, %2, #0x3\n"
 	"	ldr	%0, [%2]\n"
 	"	lsl	%1, %1, #0x3\n"
+#ifndef __ARMEB__
 	"	lsr	%0, %0, %1\n"
+#else
+	"	lsl	%0, %0, %1\n"
+#endif
 	"	b	2b\n"
 	"	.popsection\n"
 	"	.pushsection __ex_table,\"a\"\n"
@@ -86,11 +94,5 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	return ret;
 }
 
-
 #endif	/* DCACHE_WORD_ACCESS */
-
-#else	/* __ARMEB__ */
-#include <asm-generic/word-at-a-time.h>
-#endif
-
 #endif /* __ASM_ARM_WORD_AT_A_TIME_H */

arch/arm/kernel/armksyms.c

@@ -35,6 +35,8 @@ extern void __ucmpdi2(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
 extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
 
 extern void __aeabi_idiv(void);
 extern void __aeabi_idivmod(void);
@@ -114,6 +116,8 @@ EXPORT_SYMBOL(__ucmpdi2);
 EXPORT_SYMBOL(__udivsi3);
 EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
 
 #ifdef CONFIG_AEABI
 EXPORT_SYMBOL(__aeabi_idiv);

arch/arm/kernel/entry-v7m.S

@@ -14,8 +14,6 @@
 #include <asm/thread_notify.h>
 #include <asm/v7m.h>
 
-#include <mach/entry-macro.S>
-
 #include "entry-header.S"
 
 #ifdef CONFIG_TRACE_IRQFLAGS

arch/arm/kernel/etm.c

@@ -385,7 +385,6 @@ static int etb_probe(struct amba_device *dev, const struct amba_id *id)
 	return ret;
 
 out_unmap:
-	amba_set_drvdata(dev, NULL);
 	iounmap(t->etb_regs);
 
 out_release:
@@ -398,8 +397,6 @@ static int etb_remove(struct amba_device *dev)
 {
 	struct tracectx *t = amba_get_drvdata(dev);
 
-	amba_set_drvdata(dev, NULL);
-
 	iounmap(t->etb_regs);
 	t->etb_regs = NULL;
 
@@ -588,7 +585,6 @@ static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 	return ret;
 
 out_unmap:
-	amba_set_drvdata(dev, NULL);
 	iounmap(t->etm_regs);
 
 out_release:
@@ -601,8 +597,6 @@ static int etm_remove(struct amba_device *dev)
 {
 	struct tracectx *t = amba_get_drvdata(dev);
 
-	amba_set_drvdata(dev, NULL);
-
 	iounmap(t->etm_regs);
 	t->etm_regs = NULL;
 

arch/arm/kernel/setup.c

@@ -334,7 +334,7 @@ static void __init cacheid_init(void)
 		cacheid = CACHEID_VIVT;
 	}
 
-	printk("CPU: %s data cache, %s instruction cache\n",
+	pr_info("CPU: %s data cache, %s instruction cache\n",
 		cache_is_vivt() ? "VIVT" :
 		cache_is_vipt_aliasing() ? "VIPT aliasing" :
 		cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown",
@@ -416,7 +416,7 @@ void notrace cpu_init(void)
 	struct stack *stk = &stacks[cpu];
 
 	if (cpu >= NR_CPUS) {
-		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+		pr_crit("CPU%u: bad primary CPU number\n", cpu);
 		BUG();
 	}
 
@@ -484,7 +484,7 @@ void __init smp_setup_processor_id(void)
 	 */
 	set_my_cpu_offset(0);
 
-	printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr);
+	pr_info("Booting Linux on physical CPU 0x%x\n", mpidr);
 }
 
 struct mpidr_hash mpidr_hash;
@@ -564,8 +564,8 @@ static void __init setup_processor(void)
 	 */
 	list = lookup_processor_type(read_cpuid_id());
 	if (!list) {
-		printk("CPU configuration botched (ID %08x), unable "
-		       "to continue.\n", read_cpuid_id());
+		pr_err("CPU configuration botched (ID %08x), unable to continue.\n",
+		       read_cpuid_id());
 		while (1);
 	}
 
@@ -585,9 +585,9 @@ static void __init setup_processor(void)
 	cpu_cache = *list->cache;
 #endif
 
-	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
-	       proc_arch[cpu_architecture()], cr_alignment);
+	pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
+		cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+		proc_arch[cpu_architecture()], cr_alignment);
 
 	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
 		 list->arch_name, ENDIANNESS);
@@ -629,8 +629,8 @@ int __init arm_add_memory(u64 start, u64 size)
 	u64 aligned_start;
 
 	if (meminfo.nr_banks >= NR_BANKS) {
-		printk(KERN_CRIT "NR_BANKS too low, "
-			"ignoring memory at 0x%08llx\n", (long long)start);
+		pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n",
+			(long long)start);
 		return -EINVAL;
 	}
 
@@ -643,14 +643,14 @@ int __init arm_add_memory(u64 start, u64 size)
 
 #ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
 	if (aligned_start > ULONG_MAX) {
-		printk(KERN_CRIT "Ignoring memory at 0x%08llx outside "
-		       "32-bit physical address space\n", (long long)start);
+		pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n",
+			(long long)start);
 		return -EINVAL;
 	}
 
 	if (aligned_start + size > ULONG_MAX) {
-		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
-			"32-bit physical address space\n", (long long)start);
+		pr_crit("Truncating memory at 0x%08llx to fit in 32-bit physical address space\n",
+			(long long)start);
 		/*
 		 * To ensure bank->start + bank->size is representable in
 		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
@@ -660,6 +660,20 @@ int __init arm_add_memory(u64 start, u64 size)
 	}
 #endif
 
+	if (aligned_start < PHYS_OFFSET) {
+		if (aligned_start + size <= PHYS_OFFSET) {
+			pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n",
+				aligned_start, aligned_start + size);
+			return -EINVAL;
+		}
+
+		pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n",
+			aligned_start, (u64)PHYS_OFFSET);
+
+		size -= PHYS_OFFSET - aligned_start;
+		aligned_start = PHYS_OFFSET;
+	}
+
 	bank->start = aligned_start;
 	bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
 
@@ -817,18 +831,17 @@ static void __init reserve_crashkernel(void)
 	if (ret)
 		return;
 
-	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+	ret = memblock_reserve(crash_base, crash_size);
 	if (ret < 0) {
-		printk(KERN_WARNING "crashkernel reservation failed - "
-		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+		pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n",
+			(unsigned long)crash_base);
 		return;
 	}
 
-	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-	       "for crashkernel (System RAM: %ldMB)\n",
-	       (unsigned long)(crash_size >> 20),
-	       (unsigned long)(crash_base >> 20),
-	       (unsigned long)(total_mem >> 20));
+	pr_info("Reserving %ldMB of memory at %ldMB for crashkernel (System RAM: %ldMB)\n",
+		(unsigned long)(crash_size >> 20),
+		(unsigned long)(crash_base >> 20),
+		(unsigned long)(total_mem >> 20));
 
 	crashk_res.start = crash_base;
 	crashk_res.end = crash_base + crash_size - 1;

arch/arm/kernel/smp.c

@@ -105,8 +105,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	secondary_data.pgdir = get_arch_pgd(idmap_pgd);
 	secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
 #endif
-	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
-	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
+	sync_cache_w(&secondary_data);
 
 	/*
 	 * Now bring the CPU into our world.
@@ -294,6 +293,9 @@ void __ref cpu_die(void)
 	if (smp_ops.cpu_die)
 		smp_ops.cpu_die(cpu);
 
+	pr_warn("CPU%u: smp_ops.cpu_die() returned, trying to resuscitate\n",
+		cpu);
+
 	/*
 	 * Do not return to the idle loop - jump back to the secondary
 	 * cpu initialisation.  There's some initialisation which needs

arch/arm/kernel/tcm.c

@@ -52,7 +52,7 @@ static struct map_desc dtcm_iomap[] __initdata = {
 		.virtual	= DTCM_OFFSET,
 		.pfn		= __phys_to_pfn(DTCM_OFFSET),
 		.length		= 0,
-		.type		= MT_MEMORY_DTCM
+		.type		= MT_MEMORY_RW_DTCM
 	}
 };
 
@@ -61,7 +61,7 @@ static struct map_desc itcm_iomap[] __initdata = {
 		.virtual	= ITCM_OFFSET,
 		.pfn		= __phys_to_pfn(ITCM_OFFSET),
 		.length		= 0,
-		.type		= MT_MEMORY_ITCM
+		.type		= MT_MEMORY_RWX_ITCM,
 	}
 };
 

arch/arm/kernel/topology.c

@@ -68,16 +68,16 @@ struct cpu_efficiency {
  * Processors that are not defined in the table,
  * use the default SCHED_POWER_SCALE value for cpu_scale.
  */
-struct cpu_efficiency table_efficiency[] = {
+static const struct cpu_efficiency table_efficiency[] = {
 	{"arm,cortex-a15", 3891},
 	{"arm,cortex-a7",  2048},
 	{NULL, },
 };
 
-unsigned long *__cpu_capacity;
+static unsigned long *__cpu_capacity;
 #define cpu_capacity(cpu)	__cpu_capacity[cpu]
 
-unsigned long middle_capacity = 1;
+static unsigned long middle_capacity = 1;
 
 /*
  * Iterate all CPUs' descriptor in DT and compute the efficiency
@@ -89,7 +89,7 @@ unsigned long middle_capacity = 1;
  */
 static void __init parse_dt_topology(void)
 {
-	struct cpu_efficiency *cpu_eff;
+	const struct cpu_efficiency *cpu_eff;
 	struct device_node *cn = NULL;
 	unsigned long min_capacity = (unsigned long)(-1);
 	unsigned long max_capacity = 0;
@@ -158,7 +158,7 @@ static void __init parse_dt_topology(void)
  * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
  * function returns directly for SMP system.
  */
-void update_cpu_power(unsigned int cpu)
+static void update_cpu_power(unsigned int cpu)
 {
 	if (!cpu_capacity(cpu))
 		return;
@@ -185,7 +185,7 @@ const struct cpumask *cpu_coregroup_mask(int cpu)
 	return &cpu_topology[cpu].core_sibling;
 }
 
-void update_siblings_masks(unsigned int cpuid)
+static void update_siblings_masks(unsigned int cpuid)
 {
 	struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
 	int cpu;

arch/arm/kernel/traps.c

@@ -62,7 +62,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
+	printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif

arch/arm/lib/Makefile

@@ -13,7 +13,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
 		   ucmpdi2.o lib1funcs.o div64.o                      \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
-		   call_with_stack.o
+		   call_with_stack.o bswapsdi2.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
 

arch/arm/lib/backtrace.S

@@ -80,14 +80,14 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 
 		ldr	r1, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
 		ldr	r3, .Ldsi+4
-		teq	r3, r1, lsr #10
+		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
 		bleq	.Ldumpstm		@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
-		teq	r3, r1, lsr #10
+		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
 		bleq	.Ldumpstm		@ dump saved registers
 
@@ -128,11 +128,11 @@ ENDPROC(c_backtrace)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6
-		moveq	r7, #1
-		moveq	r1, #'\n'
-		movne	r1, #' '
-		ldr	r3, [stack], #-4
-		mov	r2, reg
+		moveq	r7, #0
+		adr	r3, .Lcr
+		addne	r3, r3, #1		@ skip newline
+		ldr	r2, [stack], #-4
+		mov	r1, reg
 		adr	r0, .Lfp
 		bl	printk
 2:		subs	reg, reg, #1
@@ -142,11 +142,11 @@ ENDPROC(c_backtrace)
 		blne	printk
 		ldmfd	sp!, {instr, reg, stack, r7, pc}
 
-.Lfp:		.asciz	"%cr%d:%08x"
+.Lfp:		.asciz	" r%d:%08x%s"
 .Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
-.Ldsi:		.word	0xe92dd800 >> 10	@ stmfd sp!, {... fp, ip, lr, pc}
-		.word	0xe92d0000 >> 10	@ stmfd sp!, {}
+.Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}
+		.word	0xe92d0000 >> 11	@ stmfd sp!, {}
 
 #endif

arch/arm/lib/bswapsdi2.S

+#include <linux/linkage.h>
+
+#if __LINUX_ARM_ARCH__ >= 6
+ENTRY(__bswapsi2)
+	rev r0, r0
+	bx lr
+ENDPROC(__bswapsi2)
+
+ENTRY(__bswapdi2)
+	rev r3, r0
+	rev r0, r1
+	mov r1, r3
+	bx lr
+ENDPROC(__bswapdi2)
+#else
+ENTRY(__bswapsi2)
+	eor r3, r0, r0, ror #16
+	mov r3, r3, lsr #8
+	bic r3, r3, #0xff00
+	eor r0, r3, r0, ror #8
+	mov pc, lr
+ENDPROC(__bswapsi2)
+
+ENTRY(__bswapdi2)
+	mov ip, r1
+	eor r3, ip, ip, ror #16
+	eor r1, r0, r0, ror #16
+	mov r1, r1, lsr #8
+	mov r3, r3, lsr #8
+	bic r3, r3, #0xff00
+	bic r1, r1, #0xff00
+	eor r1, r1, r0, ror #8
+	eor r0, r3, ip, ror #8
+	mov pc, lr
+ENDPROC(__bswapdi2)
+#endif

arch/arm/mach-at91/setup.c

@@ -81,7 +81,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 
 	desc->pfn = __phys_to_pfn(base);
 	desc->length = length;
-	desc->type = MT_MEMORY_NONCACHED;
+	desc->type = MT_MEMORY_RWX_NONCACHED;
 
 	pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
 		base, length, desc->virtual);

arch/arm/mach-footbridge/common.c

@@ -143,11 +143,6 @@ static struct map_desc fb_common_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
 		.length		= ARMCSR_SIZE,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= XBUS_BASE,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= XBUS_SIZE,
-		.type		= MT_DEVICE,
 	}
 };
 

arch/arm/mach-footbridge/common.h

@@ -10,3 +10,5 @@ extern void footbridge_init_irq(void);
 
 extern void isa_init_irq(unsigned int irq);
 extern void footbridge_restart(enum reboot_mode, const char *);
+
+extern void footbridge_sched_clock(void);

arch/arm/mach-footbridge/dc21285-timer.c

@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/sched_clock.h>
 
 #include <asm/irq.h>
 
@@ -46,6 +47,16 @@ static struct clocksource cksrc_dc21285 = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static int ckevt_dc21285_set_next_event(unsigned long delta,
+	struct clock_event_device *c)
+{
+	*CSR_TIMER1_CLR = 0;
+	*CSR_TIMER1_LOAD = delta;
+	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+
+	return 0;
+}
+
 static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
 	struct clock_event_device *c)
 {
@@ -58,7 +69,9 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
 				   TIMER_CNTL_DIV16;
 		break;
 
-	default:
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
 		*CSR_TIMER1_CNTL = 0;
 		break;
 	}
@@ -66,9 +79,11 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device ckevt_dc21285 = {
 	.name		= "dc21285_timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.features	= CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 200,
 	.irq		= IRQ_TIMER1,
+	.set_next_event	= ckevt_dc21285_set_next_event,
 	.set_mode	= ckevt_dc21285_set_mode,
 };
 
@@ -78,6 +93,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 
 	*CSR_TIMER1_CLR = 0;
 
+	/* Stop the timer if in one-shot mode */
+	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+		*CSR_TIMER1_CNTL = 0;
+
 	ce->event_handler(ce);
 
 	return IRQ_HANDLED;
@@ -105,3 +124,19 @@ void __init footbridge_timer_init(void)
 	ce->cpumask = cpumask_of(smp_processor_id());
 	clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
 }
+
+static u32 notrace footbridge_read_sched_clock(void)
+{
+	return ~*CSR_TIMER3_VALUE;
+}
+
+void __init footbridge_sched_clock(void)
+{
+	unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16);
+
+	*CSR_TIMER3_LOAD = 0;
+	*CSR_TIMER3_CLR = 0;
+	*CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+
+	setup_sched_clock(footbridge_read_sched_clock, 24, rate);
+}

arch/arm/mach-footbridge/ebsa285.c

@@ -4,6 +4,7 @@
  * EBSA285 machine fixup
  */
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
@@ -17,6 +18,11 @@
 
 /* LEDs */
 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+#define XBUS_AMBER_L	BIT(0)
+#define XBUS_GREEN_L	BIT(1)
+#define XBUS_RED_L	BIT(2)
+#define XBUS_TOGGLE	BIT(7)
+
 struct ebsa285_led {
 	struct led_classdev     cdev;
 	u8                      mask;
@@ -36,6 +42,7 @@ static const struct {
 };
 
 static unsigned char hw_led_state;
+static void __iomem *xbus;
 
 static void ebsa285_led_set(struct led_classdev *cdev,
 		enum led_brightness b)
@@ -47,7 +54,7 @@ static void ebsa285_led_set(struct led_classdev *cdev,
 		hw_led_state |= led->mask;
 	else
 		hw_led_state &= ~led->mask;
-	*XBUS_LEDS = hw_led_state;
+	writeb(hw_led_state, xbus);
 }
 
 static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
@@ -65,9 +72,13 @@ static int __init ebsa285_leds_init(void)
 	if (!machine_is_ebsa285())
 		return -ENODEV;
 
+	xbus = ioremap(XBUS_CS2, SZ_4K);
+	if (!xbus)
+		return -ENOMEM;
+
 	/* 3 LEDS all off */
-	hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
-	*XBUS_LEDS = hw_led_state;
+	hw_led_state = XBUS_AMBER_L | XBUS_GREEN_L | XBUS_RED_L;
+	writeb(hw_led_state, xbus);
 
 	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
 		struct ebsa285_led *led;
@@ -104,6 +115,7 @@ MACHINE_START(EBSA285, "EBSA285")
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
 	.map_io		= footbridge_map_io,
+	.init_early	= footbridge_sched_clock,
 	.init_irq	= footbridge_init_irq,
 	.init_time	= footbridge_timer_init,
 	.restart	= footbridge_restart,

arch/arm/mach-footbridge/include/mach/hardware.h

@@ -51,11 +51,7 @@
 #define PCIMEM_SIZE		0x01000000
 #define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
 
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
+#define XBUS_CS2		0x40012000
 
 #define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
 #define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)

arch/arm/mach-imx/Kconfig

@@ -3,7 +3,6 @@ config ARCH_MXC
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_ALLOCATOR

arch/arm/mach-omap2/io.c

@@ -244,7 +244,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.virtual	= OMAP4_SRAM_VA,
 		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
 		.length		= PAGE_SIZE,
-		.type		= MT_MEMORY_SO,
+		.type		= MT_MEMORY_RW_SO,
 	},
 #endif
 
@@ -282,7 +282,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 		.virtual	= OMAP4_SRAM_VA,
 		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
 		.length		= PAGE_SIZE,
-		.type		= MT_MEMORY_SO,
+		.type		= MT_MEMORY_RW_SO,
 	},
 #endif
 };

arch/arm/mach-omap2/omap4-common.c

@@ -87,7 +87,7 @@ void __init omap_barriers_init(void)
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
-	dram_io_desc[0].type = MT_MEMORY_SO;
+	dram_io_desc[0].type = MT_MEMORY_RW_SO;
 	iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
 	dram_sync = (void __iomem *) dram_io_desc[0].virtual;
 	sram_sync = (void __iomem *) OMAP4_SRAM_VA;

arch/arm/mach-sa1100/assabet.c

@@ -75,12 +75,143 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
+/*
+ * The codec reset goes to three devices, so we need to release
+ * the rest when any one of these requests it.  However, that
+ * causes the ADV7171 to consume around 100mA - more than half
+ * the LCD-blanked power.
+ *
+ * With the ADV7171, LCD and backlight enabled, we go over
+ * budget on the MAX846 Li-Ion charger, and if no Li-Ion battery
+ * is connected, the Assabet crashes.
+ */
+#define RST_UCB1X00 (1 << 0)
+#define RST_UDA1341 (1 << 1)
+#define RST_ADV7171 (1 << 2)
+
+#define SDA GPIO_GPIO(15)
+#define SCK GPIO_GPIO(18)
+#define MOD GPIO_GPIO(17)
+
+static void adv7171_start(void)
+{
+	GPSR = SCK;
+	udelay(1);
+	GPSR = SDA;
+	udelay(2);
+	GPCR = SDA;
+}
+
+static void adv7171_stop(void)
+{
+	GPSR = SCK;
+	udelay(2);
+	GPSR = SDA;
+	udelay(1);
+}
+
+static void adv7171_send(unsigned byte)
+{
+	unsigned i;
+
+	for (i = 0; i < 8; i++, byte <<= 1) {
+		GPCR = SCK;
+		udelay(1);
+		if (byte & 0x80)
+			GPSR = SDA;
+		else
+			GPCR = SDA;
+		udelay(1);
+		GPSR = SCK;
+		udelay(1);
+	}
+	GPCR = SCK;
+	udelay(1);
+	GPSR = SDA;
+	udelay(1);
+	GPDR &= ~SDA;
+	GPSR = SCK;
+	udelay(1);
+	if (GPLR & SDA)
+		printk(KERN_WARNING "No ACK from ADV7171\n");
+	udelay(1);
+	GPCR = SCK | SDA;
+	udelay(1);
+	GPDR |= SDA;
+	udelay(1);
+}
+
+static void adv7171_write(unsigned reg, unsigned val)
+{
+	unsigned gpdr = GPDR;
+	unsigned gplr = GPLR;
+
+	ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON;
+	udelay(100);
+
+	GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */
+	GPDR = (GPDR | SCK | MOD) & ~SDA;
+	udelay(10);
+	if (!(GPLR & SDA))
+		printk(KERN_WARNING "Something dragging SDA down?\n");
+	GPDR |= SDA;
+
+	adv7171_start();
+	adv7171_send(0x54);
+	adv7171_send(reg);
+	adv7171_send(val);
+	adv7171_stop();
+
+	/* Restore GPIO state for L3 bus */
+	GPSR = gplr & (SDA | SCK | MOD);
+	GPCR = (~gplr) & (SDA | SCK | MOD);
+	GPDR = gpdr;
+}
+
+static void adv7171_sleep(void)
+{
+	/* Put the ADV7171 into sleep mode */
+	adv7171_write(0x04, 0x40);
+}
+
+static unsigned codec_nreset;
+
+static void assabet_codec_reset(unsigned mask, int set)
+{
+	unsigned long flags;
+	bool old;
+
+	local_irq_save(flags);
+	old = !codec_nreset;
+	if (set)
+		codec_nreset &= ~mask;
+	else
+		codec_nreset |= mask;
+
+	if (old != !codec_nreset) {
+		if (codec_nreset) {
+			ASSABET_BCR_set(ASSABET_BCR_NCODEC_RST);
+			adv7171_sleep();
+		} else {
+			ASSABET_BCR_clear(ASSABET_BCR_NCODEC_RST);
+		}
+	}
+	local_irq_restore(flags);
+}
+
 static void assabet_ucb1x00_reset(enum ucb1x00_reset state)
 {
-	if (state == UCB_RST_PROBE)
-		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	int set = state == UCB_RST_REMOVE || state == UCB_RST_SUSPEND ||
+		state == UCB_RST_PROBE_FAIL;
+	assabet_codec_reset(RST_UCB1X00, set);
 }
 
+void assabet_uda1341_reset(int set)
+{
+	assabet_codec_reset(RST_UDA1341, set);
+}
+EXPORT_SYMBOL(assabet_uda1341_reset);
+
 
 /*
  * Assabet flash support code.
@@ -155,12 +286,9 @@ static int assabet_irda_set_power(struct device *dev, unsigned int state)
 		0
 	};
 
-	if (state < 4) {
-		state = bcr_state[state];
-		ASSABET_BCR_clear(state ^ (ASSABET_BCR_IRDA_MD1|
-					   ASSABET_BCR_IRDA_MD0));
-		ASSABET_BCR_set(state);
-	}
+	if (state < 4)
+		ASSABET_BCR_frob(ASSABET_BCR_IRDA_MD1 | ASSABET_BCR_IRDA_MD0,
+				 bcr_state[state]);
 	return 0;
 }
 
@@ -180,6 +308,7 @@ static struct irda_platform_data assabet_irda_data = {
 static struct ucb1x00_plat_data assabet_ucb1x00_data = {
 	.reset		= assabet_ucb1x00_reset,
 	.gpio_base	= -1,
+	.can_wakeup	= 1,
 };
 
 static struct mcp_plat_data assabet_mcp_data = {

arch/arm/mach-sa1100/collie.c

@@ -27,6 +27,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
@@ -242,10 +244,43 @@ struct platform_device collie_locomo_device = {
 	.resource	= locomo_resources,
 };
 
+static struct gpio_keys_button collie_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_RESERVED,
+		.gpio	= COLLIE_GPIO_ON_KEY,
+		.desc	= "On key",
+		.wakeup	= 1,
+		.active_low = 1,
+	},
+	{
+		.type	= EV_PWR,
+		.code	= KEY_WAKEUP,
+		.gpio	= COLLIE_GPIO_WAKEUP,
+		.desc	= "Sync",
+		.wakeup = 1,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_keys_platform_data collie_gpio_keys_data = {
+	.buttons	= collie_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(collie_gpio_keys),
+};
+
+static struct platform_device collie_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &collie_gpio_keys_data,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&collie_locomo_device,
 	&colliescoop_device,
 	&collie_power_device,
+	&collie_gpio_keys_device,
 };
 
 static struct mtd_partition collie_partitions[] = {

arch/arm/mach-sa1100/h3100.c

@@ -28,15 +28,35 @@
 /*
  * helper for sa1100fb
  */
+static struct gpio h3100_lcd_gpio[] = {
+	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
+	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
+};
+
+static bool h3100_lcd_request(void)
+{
+	static bool h3100_lcd_ok;
+	int rc;
+
+	if (h3100_lcd_ok)
+		return true;
+
+	rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
+	if (rc)
+		pr_err("%s: can't request GPIOs\n", __func__);
+	else
+		h3100_lcd_ok = true;
+
+	return h3100_lcd_ok;
+}
+
 static void h3100_lcd_power(int enable)
 {
-	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
-		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
-		gpio_free(H3XXX_EGPIO_LCD_ON);
-	} else {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-	}
+	if (!h3100_lcd_request())
+		return;
+
+	gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+	gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
 }
 
 static struct sa1100fb_mach_info h3100_lcd_info = {
@@ -69,6 +89,11 @@ static void __init h3100_map_io(void)
 /*
  * This turns the IRDA power on or off on the Compaq H3100
  */
+static struct gpio h3100_irda_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
+};
+
 static int h3100_irda_set_power(struct device *dev, unsigned int state)
 {
 	gpio_set_value(H3100_GPIO_IR_ON, state);
@@ -80,18 +105,27 @@ static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
 	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
 }
 
+static int h3100_irda_startup(struct device *dev)
+{
+	return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
+}
+
+static void h3100_irda_shutdown(struct device *dev)
+{
+	return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
+}
+
 static struct irda_platform_data h3100_irda_data = {
 	.set_power	= h3100_irda_set_power,
 	.set_speed	= h3100_irda_set_speed,
+	.startup	= h3100_irda_startup,
+	.shutdown	= h3100_irda_shutdown,
 };
 
 static struct gpio_default_state h3100_default_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
 	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
 	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
 	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
 };
 
 static void __init h3100_mach_init(void)

arch/arm/mach-sa1100/h3600.c

@@ -28,35 +28,39 @@
 /*
  * helper for sa1100fb
  */
+static struct gpio h3600_lcd_gpio[] = {
+	{ H3XXX_EGPIO_LCD_ON,	GPIOF_OUT_INIT_LOW,	"LCD power" },
+	{ H3600_EGPIO_LCD_PCI,	GPIOF_OUT_INIT_LOW,	"LCD control" },
+	{ H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW,	"LCD 5v" },
+	{ H3600_EGPIO_LVDD_ON,	GPIOF_OUT_INIT_LOW,	"LCD 9v/-6.5v" },
+};
+
+static bool h3600_lcd_request(void)
+{
+	static bool h3600_lcd_ok;
+	int rc;
+
+	if (h3600_lcd_ok)
+		return true;
+
+	rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio));
+	if (rc)
+		pr_err("%s: can't request GPIOs\n", __func__);
+	else
+		h3600_lcd_ok = true;
+
+	return h3600_lcd_ok;
+}
+
 static void h3600_lcd_power(int enable)
 {
-	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-		goto err1;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
-		goto err2;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
-		goto err3;
-	}
-	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
-		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
-		goto err4;
-	}
+	if (!h3600_lcd_request())
+		return;
 
 	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
 	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
 	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
 	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
-
-	gpio_free(H3600_EGPIO_LVDD_ON);
-err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
-err3:	gpio_free(H3600_EGPIO_LCD_PCI);
-err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
-err1:	return;
 }
 
 static const struct sa1100fb_rgb h3600_rgb_16 = {
@@ -93,6 +97,11 @@ static void __init h3600_map_io(void)
 /*
  * This turns the IRDA power on or off on the Compaq H3600
  */
+static struct gpio h3600_irda_gpio[] = {
+	{ H3600_EGPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
+	{ H3600_EGPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
+};
+
 static int h3600_irda_set_power(struct device *dev, unsigned int state)
 {
 	gpio_set_value(H3600_EGPIO_IR_ON, state);
@@ -106,29 +115,12 @@ static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 
 static int h3600_irda_startup(struct device *dev)
 {
-	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
-	if (err)
-		goto err1;
-	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
-	if (err)
-		goto err2;
-	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
-	if (err)
-		goto err2;
-	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
-	if (err)
-		goto err3;
-	return 0;
-
-err3:	gpio_free(H3600_EGPIO_IR_FSEL);
-err2:	gpio_free(H3600_EGPIO_IR_ON);
-err1:	return err;
+	return gpio_request_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
 }
 
 static void h3600_irda_shutdown(struct device *dev)
 {
-	gpio_free(H3600_EGPIO_IR_ON);
-	gpio_free(H3600_EGPIO_IR_FSEL);
+	return gpio_free_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
 }
 
 static struct irda_platform_data h3600_irda_data = {

arch/arm/mach-sa1100/include/mach/assabet.h

@@ -39,8 +39,8 @@ extern unsigned long SCR_value;
 
 #define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
 #define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
-#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
-#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_NGFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_NCODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
 #define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
 #define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
 #define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
@@ -69,6 +69,8 @@ extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
 #define ASSABET_BCR_frob(x,y)	do { } while (0)
 #endif
 
+extern void assabet_uda1341_reset(int set);
+
 #define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
 #define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
 

arch/arm/mach-ux500/setup.h

@@ -43,7 +43,7 @@ extern void ux500_timer_init(void);
 	.virtual	= IO_ADDRESS(x),	\
 	.pfn		= __phys_to_pfn(x),	\
 	.length		= sz,			\
-	.type		= MT_MEMORY,		\
+	.type		= MT_MEMORY_RWX,		\
 }
 
 extern struct smp_operations ux500_smp_ops;

arch/arm/mm/Makefile

@@ -12,6 +12,7 @@ ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
 endif
 
+obj-$(CONFIG_ARM_PTDUMP)	+= dump.o
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o

arch/arm/mm/cache-l2x0.c

@@ -25,6 +25,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#include "cache-tauros3.h"
 #include "cache-aurora-l2.h"
 
 #define CACHE_LINE_SIZE		32
@@ -767,6 +768,14 @@ static void aurora_save(void)
 	l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 }
 
+static void __init tauros3_save(void)
+{
+	l2x0_saved_regs.aux2_ctrl =
+		readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL);
+	l2x0_saved_regs.prefetch_ctrl =
+		readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+}
+
 static void l2x0_resume(void)
 {
 	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
@@ -821,6 +830,18 @@ static void aurora_resume(void)
 	}
 }
 
+static void tauros3_resume(void)
+{
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+		writel_relaxed(l2x0_saved_regs.aux2_ctrl,
+			       l2x0_base + TAUROS3_AUX2_CTRL);
+		writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+			       l2x0_base + L2X0_PREFETCH_CTRL);
+	}
+
+	l2x0_resume();
+}
+
 static void __init aurora_broadcast_l2_commands(void)
 {
 	__u32 u;
@@ -906,6 +927,15 @@ static const struct l2x0_of_data aurora_no_outer_data = {
 	},
 };
 
+static const struct l2x0_of_data tauros3_data = {
+	.setup = NULL,
+	.save  = tauros3_save,
+	/* Tauros3 broadcasts L1 cache operations to L2 */
+	.outer_cache = {
+		.resume      = tauros3_resume,
+	},
+};
+
 static const struct l2x0_of_data bcm_l2x0_data = {
 	.setup = pl310_of_setup,
 	.save  = pl310_save,
@@ -922,17 +952,19 @@ static const struct l2x0_of_data bcm_l2x0_data = {
 };
 
 static const struct of_device_id l2x0_ids[] __initconst = {
-	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
-	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
 	{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
-	{ .compatible = "marvell,aurora-system-cache",
-	  .data = (void *)&aurora_no_outer_data},
-	{ .compatible = "marvell,aurora-outer-cache",
-	  .data = (void *)&aurora_with_outer_data},
-	{ .compatible = "brcm,bcm11351-a2-pl310-cache",
-	  .data = (void *)&bcm_l2x0_data},
+	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
+	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
 	{ .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */
 	  .data = (void *)&bcm_l2x0_data},
+	{ .compatible = "brcm,bcm11351-a2-pl310-cache",
+	  .data = (void *)&bcm_l2x0_data},
+	{ .compatible = "marvell,aurora-outer-cache",
+	  .data = (void *)&aurora_with_outer_data},
+	{ .compatible = "marvell,aurora-system-cache",
+	  .data = (void *)&aurora_no_outer_data},
+	{ .compatible = "marvell,tauros3-cache",
+	  .data = (void *)&tauros3_data },
 	{}
 };
 

arch/arm/mm/cache-tauros3.h

+/*
+ * Marvell Tauros3 cache controller includes
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ *  (c) Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_TAUROS3_H
+#define __ASM_ARM_HARDWARE_TAUROS3_H
+
+/*
+ * Marvell Tauros3 L2CC is compatible with PL310 r0p0
+ * but with PREFETCH_CTRL (r2p0) and an additional event counter.
+ * Also, there is AUX2_CTRL for some Marvell specific control.
+ */
+
+#define TAUROS3_EVENT_CNT2_CFG		0x224
+#define TAUROS3_EVENT_CNT2_VAL		0x228
+#define TAUROS3_INV_ALL			0x780
+#define TAUROS3_CLEAN_ALL		0x784
+#define TAUROS3_AUX2_CTRL		0x820
+
+/* Registers shifts and masks */
+#define TAUROS3_AUX2_CTRL_LINEFILL_BURST8_EN	(1 << 2)
+
+#endif

arch/arm/mm/cache-v7.S

@@ -146,18 +146,18 @@ flush_levels:
 	ldr	r7, =0x7fff
 	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
 loop1:
-	mov	r9, r4				@ create working copy of max way size
+	mov	r9, r7				@ create working copy of max index
 loop2:
- ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r9, r5		)
+ ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r4, r5		)
  THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r7, r2		)
+ ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r9, r2		)
  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-	subs	r9, r9, #1			@ decrement the way
+	subs	r9, r9, #1			@ decrement the index
 	bge	loop2
-	subs	r7, r7, #1			@ decrement the index
+	subs	r4, r4, #1			@ decrement the way
 	bge	loop1
 skip:
 	add	r10, r10, #2			@ increment cache number

arch/arm/mm/context.c

@@ -36,8 +36,8 @@
  * The context ID is used by debuggers and trace logic, and
  * should be unique within all running processes.
  *
- * In big endian operation, the two 32 bit words are swapped if accesed by
- * non 64-bit operations.
+ * In big endian operation, the two 32 bit words are swapped if accessed
+ * by non-64-bit operations.
  */
 #define ASID_FIRST_VERSION	(1ULL << ASID_BITS)
 #define NUM_USER_ASIDS		ASID_FIRST_VERSION
@@ -78,20 +78,21 @@ void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
 #endif
 
 #ifdef CONFIG_ARM_LPAE
-static void cpu_set_reserved_ttbr0(void)
-{
-	/*
-	 * Set TTBR0 to swapper_pg_dir which contains only global entries. The
-	 * ASID is set to 0.
-	 */
-	cpu_set_ttbr(0, __pa(swapper_pg_dir));
-	isb();
-}
+/*
+ * With LPAE, the ASID and page tables are updated atomicly, so there is
+ * no need for a reserved set of tables (the active ASID tracking prevents
+ * any issues across a rollover).
+ */
+#define cpu_set_reserved_ttbr0()
 #else
 static void cpu_set_reserved_ttbr0(void)
 {
 	u32 ttb;
-	/* Copy TTBR1 into TTBR0 */
+	/*
+	 * Copy TTBR1 into TTBR0.
+	 * This points at swapper_pg_dir, which contains only global
+	 * entries so any speculative walks are perfectly safe.
+	 */
 	asm volatile(
 	"	mrc	p15, 0, %0, c2, c0, 1		@ read TTBR1\n"
 	"	mcr	p15, 0, %0, c2, c0, 0		@ set TTBR0\n"
@@ -179,6 +180,7 @@ static int is_reserved_asid(u64 asid)
 
 static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 {
+	static u32 cur_idx = 1;
 	u64 asid = atomic64_read(&mm->context.id);
 	u64 generation = atomic64_read(&asid_generation);
 
@@ -193,10 +195,13 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 		 * Allocate a free ASID. If we can't find one, take a
 		 * note of the currently active ASIDs and mark the TLBs
 		 * as requiring flushes. We always count from ASID #1,
-		 * as we reserve ASID #0 to switch via TTBR0 and indicate
-		 * rollover events.
+		 * as we reserve ASID #0 to switch via TTBR0 and to
+		 * avoid speculative page table walks from hitting in
+		 * any partial walk caches, which could be populated
+		 * from overlapping level-1 descriptors used to map both
+		 * the module area and the userspace stack.
 		 */
-		asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
+		asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx);
 		if (asid == NUM_USER_ASIDS) {
 			generation = atomic64_add_return(ASID_FIRST_VERSION,
 							 &asid_generation);
@@ -204,6 +209,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 			asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
 		}
 		__set_bit(asid, asid_map);
+		cur_idx = asid;
 		asid |= generation;
 		cpumask_clear(mm_cpumask(mm));
 	}
@@ -221,8 +227,9 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 		__check_vmalloc_seq(mm);
 
 	/*
-	 * Required during context switch to avoid speculative page table
-	 * walking with the wrong TTBR.
+	 * We cannot update the pgd and the ASID atomicly with classic
+	 * MMU, so switch exclusively to global mappings to avoid
+	 * speculative page table walking with the wrong TTBR.
 	 */
 	cpu_set_reserved_ttbr0();
 

arch/arm/mm/dma-mapping.c

@@ -376,7 +376,7 @@ void __init init_dma_coherent_pool_size(unsigned long size)
 static int __init atomic_pool_init(void)
 {
 	struct dma_pool *pool = &atomic_pool;
-	pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+	pgprot_t prot = pgprot_dmacoherent(PAGE_KERNEL);
 	gfp_t gfp = GFP_KERNEL | GFP_DMA;
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
@@ -624,7 +624,7 @@ static void __free_from_contiguous(struct device *dev, struct page *page,
 	if (PageHighMem(page))
 		__dma_free_remap(cpu_addr, size);
 	else
-		__dma_remap(page, size, pgprot_kernel);
+		__dma_remap(page, size, PAGE_KERNEL);
 	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);
 }
 
@@ -1351,7 +1351,7 @@ static void __iommu_free_atomic(struct device *dev, void *cpu_addr,
 static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	struct page **pages;
 	void *addr = NULL;
 

arch/arm/mm/dump.c

+/*
+ * Debug helper to dump the current kernel pagetables of the system
+ * so that we can see what the various memory ranges are set to.
+ *
+ * Derived from x86 implementation:
+ * (C) Copyright 2008 Intel Corporation
+ *
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+
+struct addr_marker {
+	unsigned long start_address;
+	const char *name;
+};
+
+static struct addr_marker address_markers[] = {
+	{ MODULES_VADDR,	"Modules" },
+	{ PAGE_OFFSET,		"Kernel Mapping" },
+	{ 0,			"vmalloc() Area" },
+	{ VMALLOC_END,		"vmalloc() End" },
+	{ FIXADDR_START,	"Fixmap Area" },
+	{ CONFIG_VECTORS_BASE,	"Vectors" },
+	{ CONFIG_VECTORS_BASE + PAGE_SIZE * 2, "Vectors End" },
+	{ -1,			NULL },
+};
+
+struct pg_state {
+	struct seq_file *seq;
+	const struct addr_marker *marker;
+	unsigned long start_address;
+	unsigned level;
+	u64 current_prot;
+};
+
+struct prot_bits {
+	u64		mask;
+	u64		val;
+	const char	*set;
+	const char	*clear;
+};
+
+static const struct prot_bits pte_bits[] = {
+	{
+		.mask	= L_PTE_USER,
+		.val	= L_PTE_USER,
+		.set	= "USR",
+		.clear	= "   ",
+	}, {
+		.mask	= L_PTE_RDONLY,
+		.val	= L_PTE_RDONLY,
+		.set	= "ro",
+		.clear	= "RW",
+	}, {
+		.mask	= L_PTE_XN,
+		.val	= L_PTE_XN,
+		.set	= "NX",
+		.clear	= "x ",
+	}, {
+		.mask	= L_PTE_SHARED,
+		.val	= L_PTE_SHARED,
+		.set	= "SHD",
+		.clear	= "   ",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_UNCACHED,
+		.set	= "SO/UNCACHED",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_BUFFERABLE,
+		.set	= "MEM/BUFFERABLE/WC",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_WRITETHROUGH,
+		.set	= "MEM/CACHED/WT",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_WRITEBACK,
+		.set	= "MEM/CACHED/WBRA",
+#ifndef CONFIG_ARM_LPAE
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_MINICACHE,
+		.set	= "MEM/MINICACHE",
+#endif
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_WRITEALLOC,
+		.set	= "MEM/CACHED/WBWA",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_DEV_SHARED,
+		.set	= "DEV/SHARED",
+#ifndef CONFIG_ARM_LPAE
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_DEV_NONSHARED,
+		.set	= "DEV/NONSHARED",
+#endif
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_DEV_WC,
+		.set	= "DEV/WC",
+	}, {
+		.mask	= L_PTE_MT_MASK,
+		.val	= L_PTE_MT_DEV_CACHED,
+		.set	= "DEV/CACHED",
+	},
+};
+
+static const struct prot_bits section_bits[] = {
+#ifndef CONFIG_ARM_LPAE
+	/* These are approximate */
+	{
+		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= 0,
+		.set	= "    ro",
+	}, {
+		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_WRITE,
+		.set	= "    RW",
+	}, {
+		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_READ,
+		.set	= "USR ro",
+	}, {
+		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.set	= "USR RW",
+#else
+	{
+		.mask	= PMD_SECT_USER,
+		.val	= PMD_SECT_USER,
+		.set	= "USR",
+	}, {
+		.mask	= PMD_SECT_RDONLY,
+		.val	= PMD_SECT_RDONLY,
+		.set	= "ro",
+		.clear	= "RW",
+#endif
+	}, {
+		.mask	= PMD_SECT_XN,
+		.val	= PMD_SECT_XN,
+		.set	= "NX",
+		.clear	= "x ",
+	}, {
+		.mask	= PMD_SECT_S,
+		.val	= PMD_SECT_S,
+		.set	= "SHD",
+		.clear	= "   ",
+	},
+};
+
+struct pg_level {
+	const struct prot_bits *bits;
+	size_t num;
+	u64 mask;
+};
+
+static struct pg_level pg_level[] = {
+	{
+	}, { /* pgd */
+	}, { /* pud */
+	}, { /* pmd */
+		.bits	= section_bits,
+		.num	= ARRAY_SIZE(section_bits),
+	}, { /* pte */
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	},
+};
+
+static void dump_prot(struct pg_state *st, const struct prot_bits *bits, size_t num)
+{
+	unsigned i;
+
+	for (i = 0; i < num; i++, bits++) {
+		const char *s;
+
+		if ((st->current_prot & bits->mask) == bits->val)
+			s = bits->set;
+		else
+			s = bits->clear;
+
+		if (s)
+			seq_printf(st->seq, " %s", s);
+	}
+}
+
+static void note_page(struct pg_state *st, unsigned long addr, unsigned level, u64 val)
+{
+	static const char units[] = "KMGTPE";
+	u64 prot = val & pg_level[level].mask;
+
+	if (addr < USER_PGTABLES_CEILING)
+		return;
+
+	if (!st->level) {
+		st->level = level;
+		st->current_prot = prot;
+		seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+	} else if (prot != st->current_prot || level != st->level ||
+		   addr >= st->marker[1].start_address) {
+		const char *unit = units;
+		unsigned long delta;
+
+		if (st->current_prot) {
+			seq_printf(st->seq, "0x%08lx-0x%08lx   ",
+				   st->start_address, addr);
+
+			delta = (addr - st->start_address) >> 10;
+			while (!(delta & 1023) && unit[1]) {
+				delta >>= 10;
+				unit++;
+			}
+			seq_printf(st->seq, "%9lu%c", delta, *unit);
+			if (pg_level[st->level].bits)
+				dump_prot(st, pg_level[st->level].bits, pg_level[st->level].num);
+			seq_printf(st->seq, "\n");
+		}
+
+		if (addr >= st->marker[1].start_address) {
+			st->marker++;
+			seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+		}
+		st->start_address = addr;
+		st->current_prot = prot;
+		st->level = level;
+	}
+}
+
+static void walk_pte(struct pg_state *st, pmd_t *pmd, unsigned long start)
+{
+	pte_t *pte = pte_offset_kernel(pmd, 0);
+	unsigned long addr;
+	unsigned i;
+
+	for (i = 0; i < PTRS_PER_PTE; i++, pte++) {
+		addr = start + i * PAGE_SIZE;
+		note_page(st, addr, 4, pte_val(*pte));
+	}
+}
+
+static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
+{
+	pmd_t *pmd = pmd_offset(pud, 0);
+	unsigned long addr;
+	unsigned i;
+
+	for (i = 0; i < PTRS_PER_PMD; i++, pmd++) {
+		addr = start + i * PMD_SIZE;
+		if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd))
+			note_page(st, addr, 3, pmd_val(*pmd));
+		else
+			walk_pte(st, pmd, addr);
+	}
+}
+
+static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
+{
+	pud_t *pud = pud_offset(pgd, 0);
+	unsigned long addr;
+	unsigned i;
+
+	for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
+		addr = start + i * PUD_SIZE;
+		if (!pud_none(*pud)) {
+			walk_pmd(st, pud, addr);
+		} else {
+			note_page(st, addr, 2, pud_val(*pud));
+		}
+	}
+}
+
+static void walk_pgd(struct seq_file *m)
+{
+	pgd_t *pgd = swapper_pg_dir;
+	struct pg_state st;
+	unsigned long addr;
+	unsigned i, pgdoff = USER_PGTABLES_CEILING / PGDIR_SIZE;
+
+	memset(&st, 0, sizeof(st));
+	st.seq = m;
+	st.marker = address_markers;
+
+	pgd += pgdoff;
+
+	for (i = pgdoff; i < PTRS_PER_PGD; i++, pgd++) {
+		addr = i * PGDIR_SIZE;
+		if (!pgd_none(*pgd)) {
+			walk_pud(&st, pgd, addr);
+		} else {
+			note_page(&st, addr, 1, pgd_val(*pgd));
+		}
+	}
+
+	note_page(&st, 0, 0, 0);
+}
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	walk_pgd(m);
+	return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ptdump_show, NULL);
+}
+
+static const struct file_operations ptdump_fops = {
+	.open		= ptdump_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int ptdump_init(void)
+{
+	struct dentry *pe;
+	unsigned i, j;
+
+	for (i = 0; i < ARRAY_SIZE(pg_level); i++)
+		if (pg_level[i].bits)
+			for (j = 0; j < pg_level[i].num; j++)
+				pg_level[i].mask |= pg_level[i].bits[j].mask;
+
+	address_markers[2].start_address = VMALLOC_START;
+
+	pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
+				 &ptdump_fops);
+	return pe ? 0 : -ENOMEM;
+}
+__initcall(ptdump_init);

arch/arm/mm/init.c

@@ -142,58 +142,6 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low,
 	*max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
 }
 
-static void __init arm_bootmem_init(unsigned long start_pfn,
-	unsigned long end_pfn)
-{
-	struct memblock_region *reg;
-	unsigned int boot_pages;
-	phys_addr_t bitmap;
-	pg_data_t *pgdat;
-
-	/*
-	 * Allocate the bootmem bitmap page.  This must be in a region
-	 * of memory which has already been mapped.
-	 */
-	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
-				__pfn_to_phys(end_pfn));
-
-	/*
-	 * Initialise the bootmem allocator, handing the
-	 * memory banks over to bootmem.
-	 */
-	node_set_online(0);
-	pgdat = NODE_DATA(0);
-	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
-
-	/* Free the lowmem regions from memblock into bootmem. */
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-		if (end >= end_pfn)
-			end = end_pfn;
-		if (start >= end)
-			break;
-
-		free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
-	}
-
-	/* Reserve the lowmem memblock reserved regions in bootmem. */
-	for_each_memblock(reserved, reg) {
-		unsigned long start = memblock_region_reserved_base_pfn(reg);
-		unsigned long end = memblock_region_reserved_end_pfn(reg);
-
-		if (end >= end_pfn)
-			end = end_pfn;
-		if (start >= end)
-			break;
-
-		reserve_bootmem(__pfn_to_phys(start),
-			        (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
-	}
-}
-
 #ifdef CONFIG_ZONE_DMA
 
 phys_addr_t arm_dma_zone_size __read_mostly;
@@ -233,7 +181,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 #endif
 }
 
-static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
+static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 	unsigned long max_high)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
@@ -381,7 +329,6 @@ void __init arm_memblock_init(struct meminfo *mi,
 	dma_contiguous_reserve(min(arm_dma_limit, arm_lowmem_limit));
 
 	arm_memblock_steal_permitted = false;
-	memblock_allow_resize();
 	memblock_dump_all();
 }
 
@@ -389,12 +336,11 @@ void __init bootmem_init(void)
 {
 	unsigned long min, max_low, max_high;
 
+	memblock_allow_resize();
 	max_low = max_high = 0;
 
 	find_limits(&min, &max_low, &max_high);
 
-	arm_bootmem_init(min, max_low);
-
 	/*
 	 * Sparsemem tries to allocate bootmem in memory_present(),
 	 * so must be done after the fixed reservations
@@ -411,7 +357,7 @@ void __init bootmem_init(void)
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
-	arm_bootmem_free(min, max_low, max_high);
+	zone_sizes_init(min, max_low, max_high);
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
@@ -584,7 +530,7 @@ void __init mem_init(void)
 	extern u32 itcm_end;
 #endif
 
-	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
 
 	/* this will put all unused low memory onto the freelists */
 	free_unused_memmap(&meminfo);

arch/arm/mm/ioremap.c

@@ -392,9 +392,9 @@ __arm_ioremap_exec(phys_addr_t phys_addr, size_t size, bool cached)
 	unsigned int mtype;
 
 	if (cached)
-		mtype = MT_MEMORY;
+		mtype = MT_MEMORY_RWX;
 	else
-		mtype = MT_MEMORY_NONCACHED;
+		mtype = MT_MEMORY_RWX_NONCACHED;
 
 	return __arm_ioremap_caller(phys_addr, size, mtype,
 			__builtin_return_address(0));

arch/arm/mm/mmu.c

@@ -22,6 +22,7 @@
 #include <asm/cputype.h>
 #include <asm/sections.h>
 #include <asm/cachetype.h>
+#include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp_plat.h>
 #include <asm/tlb.h>
@@ -287,36 +288,43 @@ static struct mem_type mem_types[] = {
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_USER,
 	},
-	[MT_MEMORY] = {
+	[MT_MEMORY_RWX] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RW] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
 	},
-	[MT_MEMORY_NONCACHED] = {
+	[MT_MEMORY_RWX_NONCACHED] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_MT_BUFFERABLE,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
-	[MT_MEMORY_DTCM] = {
+	[MT_MEMORY_RW_DTCM] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
 	},
-	[MT_MEMORY_ITCM] = {
+	[MT_MEMORY_RWX_ITCM] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_KERNEL,
 	},
-	[MT_MEMORY_SO] = {
+	[MT_MEMORY_RW_SO] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_MT_UNCACHED | L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
@@ -325,7 +333,8 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_DMA_READY] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -337,6 +346,44 @@ const struct mem_type *get_mem_type(unsigned int type)
 }
 EXPORT_SYMBOL(get_mem_type);
 
+#define PTE_SET_FN(_name, pteop) \
+static int pte_set_##_name(pte_t *ptep, pgtable_t token, unsigned long addr, \
+			void *data) \
+{ \
+	pte_t pte = pteop(*ptep); \
+\
+	set_pte_ext(ptep, pte, 0); \
+	return 0; \
+} \
+
+#define SET_MEMORY_FN(_name, callback) \
+int set_memory_##_name(unsigned long addr, int numpages) \
+{ \
+	unsigned long start = addr; \
+	unsigned long size = PAGE_SIZE*numpages; \
+	unsigned end = start + size; \
+\
+	if (start < MODULES_VADDR || start >= MODULES_END) \
+		return -EINVAL;\
+\
+	if (end < MODULES_VADDR || end >= MODULES_END) \
+		return -EINVAL; \
+\
+	apply_to_page_range(&init_mm, start, size, callback, NULL); \
+	flush_tlb_kernel_range(start, end); \
+	return 0;\
+}
+
+PTE_SET_FN(ro, pte_wrprotect)
+PTE_SET_FN(rw, pte_mkwrite)
+PTE_SET_FN(x, pte_mkexec)
+PTE_SET_FN(nx, pte_mknexec)
+
+SET_MEMORY_FN(ro, pte_set_ro)
+SET_MEMORY_FN(rw, pte_set_rw)
+SET_MEMORY_FN(x, pte_set_x)
+SET_MEMORY_FN(nx, pte_set_nx)
+
 /*
  * Adjust the PMD section entries according to the CPU in use.
  */
@@ -410,6 +457,9 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
 			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
 			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
+
+			/* Also setup NX memory mapping */
+			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -487,11 +537,13 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RWX].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
 		}
 	}
 
@@ -502,15 +554,15 @@ static void __init build_mem_type_table(void)
 	if (cpu_arch >= CPU_ARCH_ARMv6) {
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/* Non-cacheable Normal is XCB = 001 */
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |=
 				PMD_SECT_BUFFERED;
 		} else {
 			/* For both ARMv6 and non-TEX-remapping ARMv7 */
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |=
 				PMD_SECT_TEX(1);
 		}
 	} else {
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+		mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
 	}
 
 #ifdef CONFIG_ARM_LPAE
@@ -543,10 +595,12 @@ static void __init build_mem_type_table(void)
 
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
-	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
-	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RWX].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
-	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
+	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
 	switch (cp->pmd) {
@@ -1296,6 +1350,8 @@ static void __init kmap_init(void)
 static void __init map_lowmem(void)
 {
 	struct memblock_region *reg;
+	unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
+	unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
 
 	/* Map all the lowmem memory banks. */
 	for_each_memblock(memory, reg) {
@@ -1308,12 +1364,40 @@ static void __init map_lowmem(void)
 		if (start >= end)
 			break;
 
-		map.pfn = __phys_to_pfn(start);
-		map.virtual = __phys_to_virt(start);
-		map.length = end - start;
-		map.type = MT_MEMORY;
+		if (end < kernel_x_start || start >= kernel_x_end) {
+			map.pfn = __phys_to_pfn(start);
+			map.virtual = __phys_to_virt(start);
+			map.length = end - start;
+			map.type = MT_MEMORY_RWX;
 
-		create_mapping(&map);
+			create_mapping(&map);
+		} else {
+			/* This better cover the entire kernel */
+			if (start < kernel_x_start) {
+				map.pfn = __phys_to_pfn(start);
+				map.virtual = __phys_to_virt(start);
+				map.length = kernel_x_start - start;
+				map.type = MT_MEMORY_RW;
+
+				create_mapping(&map);
+			}
+
+			map.pfn = __phys_to_pfn(kernel_x_start);
+			map.virtual = __phys_to_virt(kernel_x_start);
+			map.length = kernel_x_end - kernel_x_start;
+			map.type = MT_MEMORY_RWX;
+
+			create_mapping(&map);
+
+			if (kernel_x_end < end) {
+				map.pfn = __phys_to_pfn(kernel_x_end);
+				map.virtual = __phys_to_virt(kernel_x_end);
+				map.length = end - kernel_x_end;
+				map.type = MT_MEMORY_RW;
+
+				create_mapping(&map);
+			}
+		}
 	}
 }
 

arch/arm/mm/pgd.c

@@ -23,7 +23,7 @@
 #define __pgd_alloc()	kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
 #define __pgd_free(pgd)	kfree(pgd)
 #else
-#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
+#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, 2)
 #define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
 #endif
 

drivers/amba/bus.c

@@ -83,162 +83,6 @@ static struct device_attribute amba_dev_attrs[] = {
 	__ATTR_NULL,
 };
 
-#ifdef CONFIG_PM_SLEEP
-
-static int amba_legacy_suspend(struct device *dev, pm_message_t mesg)
-{
-	struct amba_driver *adrv = to_amba_driver(dev->driver);
-	struct amba_device *adev = to_amba_device(dev);
-	int ret = 0;
-
-	if (dev->driver && adrv->suspend)
-		ret = adrv->suspend(adev, mesg);
-
-	return ret;
-}
-
-static int amba_legacy_resume(struct device *dev)
-{
-	struct amba_driver *adrv = to_amba_driver(dev->driver);
-	struct amba_device *adev = to_amba_device(dev);
-	int ret = 0;
-
-	if (dev->driver && adrv->resume)
-		ret = adrv->resume(adev);
-
-	return ret;
-}
-
-#endif /* CONFIG_PM_SLEEP */
-
-#ifdef CONFIG_SUSPEND
-
-static int amba_pm_suspend(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->suspend)
-			ret = drv->pm->suspend(dev);
-	} else {
-		ret = amba_legacy_suspend(dev, PMSG_SUSPEND);
-	}
-
-	return ret;
-}
-
-static int amba_pm_resume(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->resume)
-			ret = drv->pm->resume(dev);
-	} else {
-		ret = amba_legacy_resume(dev);
-	}
-
-	return ret;
-}
-
-#else /* !CONFIG_SUSPEND */
-
-#define amba_pm_suspend		NULL
-#define amba_pm_resume		NULL
-
-#endif /* !CONFIG_SUSPEND */
-
-#ifdef CONFIG_HIBERNATE_CALLBACKS
-
-static int amba_pm_freeze(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->freeze)
-			ret = drv->pm->freeze(dev);
-	} else {
-		ret = amba_legacy_suspend(dev, PMSG_FREEZE);
-	}
-
-	return ret;
-}
-
-static int amba_pm_thaw(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->thaw)
-			ret = drv->pm->thaw(dev);
-	} else {
-		ret = amba_legacy_resume(dev);
-	}
-
-	return ret;
-}
-
-static int amba_pm_poweroff(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->poweroff)
-			ret = drv->pm->poweroff(dev);
-	} else {
-		ret = amba_legacy_suspend(dev, PMSG_HIBERNATE);
-	}
-
-	return ret;
-}
-
-static int amba_pm_restore(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	int ret = 0;
-
-	if (!drv)
-		return 0;
-
-	if (drv->pm) {
-		if (drv->pm->restore)
-			ret = drv->pm->restore(dev);
-	} else {
-		ret = amba_legacy_resume(dev);
-	}
-
-	return ret;
-}
-
-#else /* !CONFIG_HIBERNATE_CALLBACKS */
-
-#define amba_pm_freeze		NULL
-#define amba_pm_thaw		NULL
-#define amba_pm_poweroff		NULL
-#define amba_pm_restore		NULL
-
-#endif /* !CONFIG_HIBERNATE_CALLBACKS */
-
 #ifdef CONFIG_PM_RUNTIME
 /*
  * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to
@@ -251,7 +95,7 @@ static int amba_pm_runtime_suspend(struct device *dev)
 	int ret = pm_generic_runtime_suspend(dev);
 
 	if (ret == 0 && dev->driver)
-		clk_disable(pcdev->pclk);
+		clk_disable_unprepare(pcdev->pclk);
 
 	return ret;
 }
@@ -262,7 +106,7 @@ static int amba_pm_runtime_resume(struct device *dev)
 	int ret;
 
 	if (dev->driver) {
-		ret = clk_enable(pcdev->pclk);
+		ret = clk_prepare_enable(pcdev->pclk);
 		/* Failure is probably fatal to the system, but... */
 		if (ret)
 			return ret;
@@ -272,15 +116,13 @@ static int amba_pm_runtime_resume(struct device *dev)
 }
 #endif
 
-#ifdef CONFIG_PM
-
 static const struct dev_pm_ops amba_pm = {
-	.suspend	= amba_pm_suspend,
-	.resume		= amba_pm_resume,
-	.freeze		= amba_pm_freeze,
-	.thaw		= amba_pm_thaw,
-	.poweroff	= amba_pm_poweroff,
-	.restore	= amba_pm_restore,
+	.suspend	= pm_generic_suspend,
+	.resume		= pm_generic_resume,
+	.freeze		= pm_generic_freeze,
+	.thaw		= pm_generic_thaw,
+	.poweroff	= pm_generic_poweroff,
+	.restore	= pm_generic_restore,
 	SET_RUNTIME_PM_OPS(
 		amba_pm_runtime_suspend,
 		amba_pm_runtime_resume,
@@ -288,14 +130,6 @@ static const struct dev_pm_ops amba_pm = {
 	)
 };
 
-#define AMBA_PM (&amba_pm)
-
-#else /* !CONFIG_PM */
-
-#define AMBA_PM	NULL
-
-#endif /* !CONFIG_PM */
-
 /*
  * Primecells are part of the Advanced Microcontroller Bus Architecture,
  * so we call the bus "amba".
@@ -305,7 +139,7 @@ struct bus_type amba_bustype = {
 	.dev_attrs	= amba_dev_attrs,
 	.match		= amba_match,
 	.uevent		= amba_uevent,
-	.pm		= AMBA_PM,
+	.pm		= &amba_pm,
 };
 
 static int __init amba_init(void)
@@ -317,36 +151,23 @@ postcore_initcall(amba_init);
 
 static int amba_get_enable_pclk(struct amba_device *pcdev)
 {
-	struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
 	int ret;
 
-	pcdev->pclk = pclk;
-
-	if (IS_ERR(pclk))
-		return PTR_ERR(pclk);
+	pcdev->pclk = clk_get(&pcdev->dev, "apb_pclk");
+	if (IS_ERR(pcdev->pclk))
+		return PTR_ERR(pcdev->pclk);
 
-	ret = clk_prepare(pclk);
-	if (ret) {
-		clk_put(pclk);
-		return ret;
-	}
-
-	ret = clk_enable(pclk);
-	if (ret) {
-		clk_unprepare(pclk);
-		clk_put(pclk);
-	}
+	ret = clk_prepare_enable(pcdev->pclk);
+	if (ret)
+		clk_put(pcdev->pclk);
 
 	return ret;
 }
 
 static void amba_put_disable_pclk(struct amba_device *pcdev)
 {
-	struct clk *pclk = pcdev->pclk;
-
-	clk_disable(pclk);
-	clk_unprepare(pclk);
-	clk_put(pclk);
+	clk_disable_unprepare(pcdev->pclk);
+	clk_put(pcdev->pclk);
 }
 
 /*

drivers/input/serio/ambakmi.c

@@ -167,8 +167,6 @@ static int amba_kmi_remove(struct amba_device *dev)
 {
 	struct amba_kmi_port *kmi = amba_get_drvdata(dev);
 
-	amba_set_drvdata(dev, NULL);
-
 	serio_unregister_port(kmi->io);
 	clk_put(kmi->clk);
 	iounmap(kmi->base);

drivers/mmc/host/mmci.c

@@ -1683,8 +1683,6 @@ static int mmci_remove(struct amba_device *dev)
 {
 	struct mmc_host *mmc = amba_get_drvdata(dev);
 
-	amba_set_drvdata(dev, NULL);
-
 	if (mmc) {
 		struct mmci_host *host = mmc_priv(mmc);