Commit f3d5b34c authored by Tobias Oed's avatar Tobias Oed Committed by Linus Torvalds

[PATCH] Enable cdrom dma access with pdc20265_old

This patch allows me to use dma with my cd/dvd attached to my on board
pdc20265 ide controller

Alan sayeth:

  Looks sane.  Would be nice to know if there is any documentation
  supporting this hack being safe but the logic makes sense.  The LBA48 case
  faces the same problem - the state machine gets confused about the transfer
  length and needs kicking
Signed-off-by: default avatarTobias Oed <tobiasoed@hotmail.com>
Acked-by: default avatarAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Jens Axboe <axboe@suse.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 0750508a
...@@ -154,7 +154,8 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -154,7 +154,8 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
u8 AP, BP, CP, DP; u8 AP, BP, CP, DP;
u8 TA = 0, TB = 0, TC = 0; u8 TA = 0, TB = 0, TC = 0;
if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0)) if (drive->media != ide_disk &&
drive->media != ide_cdrom && speed < XFER_SW_DMA_0)
return -1; return -1;
pci_read_config_dword(dev, drive_pci, &drive_conf); pci_read_config_dword(dev, drive_pci, &drive_conf);
...@@ -330,14 +331,12 @@ static int config_chipset_for_dma (ide_drive_t *drive) ...@@ -330,14 +331,12 @@ static int config_chipset_for_dma (ide_drive_t *drive)
chipset_is_set: chipset_is_set:
if (drive->media == ide_disk) { pci_read_config_byte(dev, (drive_pci), &AP);
pci_read_config_byte(dev, (drive_pci), &AP); if (id->capability & 4) /* IORDY_EN */
if (id->capability & 4) /* IORDY_EN */ pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN);
pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN); pci_read_config_byte(dev, (drive_pci), &AP);
pci_read_config_byte(dev, (drive_pci), &AP); if (drive->media == ide_disk) /* PREFETCH_EN */
if (drive->media == ide_disk) /* PREFETCH_EN */ pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN);
pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN);
}
speed = ide_dma_speed(drive, pdc202xx_ratemask(drive)); speed = ide_dma_speed(drive, pdc202xx_ratemask(drive));
...@@ -385,7 +384,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) ...@@ -385,7 +384,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
{ {
if (drive->current_speed > XFER_UDMA_2) if (drive->current_speed > XFER_UDMA_2)
pdc_old_enable_66MHz_clock(drive->hwif); pdc_old_enable_66MHz_clock(drive->hwif);
if (drive->addressing == 1) { if (drive->media != ide_disk || drive->addressing == 1) {
struct request *rq = HWGROUP(drive)->rq; struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->dma_master; unsigned long high_16 = hwif->dma_master;
...@@ -405,7 +404,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) ...@@ -405,7 +404,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
{ {
if (drive->addressing == 1) { if (drive->media != ide_disk || drive->addressing == 1) {
ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->dma_master; unsigned long high_16 = hwif->dma_master;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
...@@ -519,6 +518,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) ...@@ -519,6 +518,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->ultra_mask = 0x3f; hwif->ultra_mask = 0x3f;
hwif->mwdma_mask = 0x07; hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07; hwif->swdma_mask = 0x07;
hwif->atapi_dma = 1;
hwif->err_stops_fifo = 1; hwif->err_stops_fifo = 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment