arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi

On RZ/G2{L,LC} SoM module, gpio for power selection is connected to
P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios property
of vccq_sdhi1 regulator from common dtsi to soc specific dtsi.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220401175427.19078-1-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi

@@ -74,7 +74,6 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 		regulator-name = "SDHI1 VccQ";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};

arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi

@@ -48,3 +48,7 @@ &scif2 {
 	status = "okay";
 };
 #endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};

arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi

@@ -98,3 +98,7 @@ &spi1 {
 	status = "disabled";
 };
 #endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};