Commit f6160f35 authored by Dmitry Osipenko's avatar Dmitry Osipenko Committed by Vinod Koul

dmaengine: tegra-apb: Support non-flow controlled slave configuration

This allows DMA client to issue a non-flow controlled TX. In particular
it is needed for the fuse driver that reads fuse registers using APBDMA
to workaround a HW bug that results in hang when CPU and DMA perform
simultaneous access to fuse peripheral.
Signed-off-by: default avatarDmitry Osipenko <digetx@gmail.com>
Reviewed-by: default avatarJon Hunter <jonathanh@nvidia.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 4fbd8d19
......@@ -353,7 +353,8 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
}
memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID) {
if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID &&
sconfig->device_fc) {
if (sconfig->slave_id > TEGRA_APBDMA_CSR_REQ_SEL_MASK)
return -EINVAL;
tdc->slave_id = sconfig->slave_id;
......@@ -970,8 +971,13 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
csr |= TEGRA_APBDMA_CSR_ONCE | TEGRA_APBDMA_CSR_FLOW;
csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
csr |= TEGRA_APBDMA_CSR_ONCE;
if (tdc->slave_id != TEGRA_APBDMA_SLAVE_ID_INVALID) {
csr |= TEGRA_APBDMA_CSR_FLOW;
csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
}
if (flags & DMA_PREP_INTERRUPT)
csr |= TEGRA_APBDMA_CSR_IE_EOC;
......@@ -1110,10 +1116,13 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
csr |= TEGRA_APBDMA_CSR_FLOW;
if (tdc->slave_id != TEGRA_APBDMA_SLAVE_ID_INVALID) {
csr |= TEGRA_APBDMA_CSR_FLOW;
csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
}
if (flags & DMA_PREP_INTERRUPT)
csr |= TEGRA_APBDMA_CSR_IE_EOC;
csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment