Commit f61c2991 authored by Daniel Scheller's avatar Daniel Scheller Committed by Mauro Carvalho Chehab

[media] dvb-frontends/stv0367: add flag to make i2c_gatectrl optional

Some hardware and bridges (namely ddbridge) require that tuner access is
limited to one concurrent access and wrap i2c gate control with a
mutex_lock when attaching frontends. According to vendor information, this
is required as concurrent tuner reconfiguration can interfere each other
and at worst cause tuning fails or bad reception quality.

If the demod driver does gate_ctrl before setting up tuner parameters, and
the tuner does another I2C enable, it will deadlock forever when gate_ctrl
is wrapped into the mutex_lock. This adds a flag and a conditional before
triggering gate_ctrl in the demodulator driver.
Signed-off-by: default avatarDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 8108f7f4
......@@ -89,6 +89,8 @@ struct stv0367_state {
struct stv0367cab_state *cab_state;
/* DVB-T */
struct stv0367ter_state *ter_state;
/* flags for operation control */
u8 use_i2c_gatectrl;
};
struct st_register {
......@@ -1827,10 +1829,10 @@ static int stv0367ter_set_frontend(struct dvb_frontend *fe)
stv0367ter_init(fe);
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.set_params(fe);
if (fe->ops.i2c_gate_ctrl)
if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
......@@ -2321,6 +2323,9 @@ struct dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
state->fe.demodulator_priv = state;
state->chip_id = stv0367_readreg(state, 0xf000);
/* demod operation options */
state->use_i2c_gatectrl = 1;
dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
/* check if the demod is there */
......@@ -3120,10 +3125,10 @@ static int stv0367cab_set_frontend(struct dvb_frontend *fe)
/* Tuner Frequency Setting */
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.set_params(fe);
if (fe->ops.i2c_gate_ctrl)
if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
......@@ -3437,6 +3442,9 @@ struct dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
state->fe.demodulator_priv = state;
state->chip_id = stv0367_readreg(state, 0xf000);
/* demod operation options */
state->use_i2c_gatectrl = 1;
dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
/* check if the demod is there */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment