Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "As far as new functionality is concerned, there is a new thermal
  driver for the Intel Hardware Feedback Interface (HFI) along with some
  intel-speed-select utility changes to support it. There are also new
  DT compatible strings for a couple of platforms, and thermal zones on
  some platforms will be registered as HWmon sensors now.

  Apart from the above, some drivers are updated (fixes mostly) and
  there is a new piece of documentation for the Intel DPTF (Dynamic
  Power and Thermal Framework) sysfs interface.

  Specifics:

   - Add a new thermal driver for the Intel Hardware Feedback Interface
     (HFI) including the HFI initialization, HFI notification interrupt
     handling and sending CPU capabilities change messages to user space
     via the thermal netlink interface (Ricardo Neri, Srinivas
     Pandruvada, Nathan Chancellor, Randy Dunlap).

   - Extend the intel-speed-select utility to handle out-of-band CPU
     configuration changes and add support for the CPU capabilities
     change messages sent over the thermal netlink interface by the new
     HFI thermal driver to it (Srinivas Pandruvada).

   - Convert the DT bindings to yaml format for the Exynos platform and
     fix and update the MAINTAINERS file for this driver (Krzysztof
     Kozlowski).

   - Register the thermal zones as HWmon sensors for the QCom's Tsens
     driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).

   - Add the msm8953 compatible documentation in the bindings (Luca
     Weiss).

   - Add the sm8150 platform support to the QCom LMh driver's DT binding
     (Thara Gopinath).

   - Check the command result from the IPC command to the BPMP in the
     Tegra driver (Mikko Perttunen).

   - Silence the error for normal configuration where the interrupt is
     optionnal in the Broadcom thermal driver (Florian Fainelli).

   - Remove remaining dead code from the TI thermal driver (Yue
     Haibing).

   - Don't use bitmap_weight() in end_power_clamp() in the powerclamp
     driver (Yury Norov).

   - Update the OS policy capabilities handshake in the int340x thermal
     driver (Srinivas Pandruvada).

   - Increase the policies bitmap size in int340x (Srinivas Pandruvada).

   - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
     int340x thermal driver (Rafael Wysocki).

   - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).

   - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
     interface documentation (Srinivas Pandruvada).

   - Fix bullet list warning in the thermal documentation (Randy
     Dunlap)"

* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  thermal: int340x: Update OS policy capability handshake
  thermal: int340x: Increase bitmap size
  Documentation: thermal: DPTF Documentation
  MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
  thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
  thermal/drivers/brcmstb_thermal: Interrupt is optional
  thermal: tegra-bpmp: Handle errors in BPMP response
  drivers/thermal/ti-soc-thermal: Add hwmon support
  dt-bindings: thermal: tsens: Add msm8953 compatible
  dt-bindings: thermal: Add sm8150 compatible string for LMh
  thermal/drivers/qcom/lmh: Add support for sm8150
  thermal/drivers/tsens: register thermal zones as hwmon sensors
  MAINTAINERS: thermal: samsung: Drop obsolete properties
  dt-bindings: thermal: samsung: Convert to dtschema
  tools/power/x86/intel-speed-select: v1.12 release
  tools/power/x86/intel-speed-select: HFI support
  tools/power/x86/intel-speed-select: OOB daemon mode
  thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
  thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
  thermal: Replace acpi_bus_get_device()
  ...

Documentation/ABI/testing/sysfs-class-thermal

@@ -203,7 +203,7 @@ Description:
 
 		- for generic ACPI: should be "Fan", "Processor" or "LCD"
 		- for memory controller device on intel_menlow platform:
-		should be "Memory controller".
+		  should be "Memory controller".
 
 		RO, Required
 

Documentation/devicetree/bindings/thermal/exynos-thermal.txt

-* Exynos Thermal Management Unit (TMU)
-
-** Required properties:
-
-- compatible : One of the following:
-	       "samsung,exynos3250-tmu"
-	       "samsung,exynos4412-tmu"
-	       "samsung,exynos4210-tmu"
-	       "samsung,exynos5250-tmu"
-	       "samsung,exynos5260-tmu"
-	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
-	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
-			Exynos5420 (Must pass triminfo base and triminfo clock)
-               "samsung,exynos5433-tmu"
-	       "samsung,exynos7-tmu"
-- reg : Address range of the thermal registers. For soc's which has multiple
-	instances of TMU and some registers are shared across all TMU's like
-	interrupt related then 2 set of register has to supplied. First set
-	belongs	to register set of TMU instance and second set belongs to
-	registers shared with the TMU instance.
-
-  NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
-	channels 2, 3 and 4
-	Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
-	register, also provide clock to access that base.
-
-	TRIMINFO at 0x1006c000 contains data for TMU channel 3
-	TRIMINFO at 0x100a0000 contains data for TMU channel 4
-	TRIMINFO at 0x10068000 contains data for TMU channel 2
-
-- interrupts : Should contain interrupt for thermal system
-- clocks : The main clocks for TMU device
-	-- 1. operational clock for TMU channel
-	-- 2. optional clock to access the shared registers of TMU channel
-	-- 3. optional special clock for functional operation
-- clock-names : Thermal system clock name
-	-- "tmu_apbif" operational clock for current TMU channel
-	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
-		for current TMU channel
-	-- "tmu_sclk" clock for functional operation of the current TMU
-		channel
-
-The Exynos TMU supports generating interrupts when reaching given
-temperature thresholds. Number of supported thermal trip points depends
-on the SoC (only first trip points defined in DT will be configured):
- - most of SoC: 4
- - samsung,exynos5433-tmu: 8
- - samsung,exynos7-tmu: 8
-
-** Optional properties:
-
-- vtmu-supply: This entry is optional and provides the regulator node supplying
-		voltage to TMU. If needed this entry can be placed inside
-		board/platform specific dts file.
-
-Example 1):
-
-	tmu@100c0000 {
-		compatible = "samsung,exynos4412-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock 383>;
-		clock-names = "tmu_apbif";
-		vtmu-supply = <&tmu_regulator_node>;
-		#thermal-sensor-cells = <0>;
-	};
-
-Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock 318>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock 318>, <&clock 319>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock 319>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-Note: For multi-instance tmu each instance should have an alias correctly
-numbered in "aliases" node.
-
-Example:
-
-aliases {
-	tmuctrl0 = &tmuctrl_0;
-	tmuctrl1 = &tmuctrl_1;
-	tmuctrl2 = &tmuctrl_2;
-};

Documentation/devicetree/bindings/thermal/qcom-lmh.yaml

@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - qcom,sdm845-lmh
+      - qcom,sm8150-lmh
 
   reg:
     items:

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -43,6 +43,7 @@ properties:
       - description: v2 of TSENS
         items:
           - enum:
+              - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sc7180-tsens

Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/samsung,exynos-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Thermal Management Unit (TMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  For multi-instance tmu each instance should have an alias correctly numbered
+  in "aliases" node.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-tmu
+      - samsung,exynos4412-tmu
+      - samsung,exynos4210-tmu
+      - samsung,exynos5250-tmu
+      - samsung,exynos5260-tmu
+        # For TMU channel 0, 1 on Exynos5420:
+      - samsung,exynos5420-tmu
+        # For TMU channels 2, 3 and 4 of Exynos5420:
+      - samsung,exynos5420-tmu-ext-triminfo
+      - samsung,exynos5433-tmu
+      - samsung,exynos7-tmu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    description: |
+      The Exynos TMU supports generating interrupts when reaching given
+      temperature thresholds. Number of supported thermal trip points depends
+      on the SoC (only first trip points defined in DT will be configured)::
+       - most of SoC: 4
+       - samsung,exynos5433-tmu: 8
+       - samsung,exynos7-tmu: 8
+    maxItems: 1
+
+  reg:
+    items:
+      - description: TMU instance registers.
+      - description: |
+          Shared TMU registers.
+
+          Note:: On Exynos5420, the TRIMINFO register is misplaced for TMU
+          channels 2, 3 and 4 Use "samsung,exynos5420-tmu-ext-triminfo" in
+          cases, there is a misplaced register, also provide clock to access
+          that base.
+          TRIMINFO at 0x1006c000 contains data for TMU channel 3
+          TRIMINFO at 0x100a0000 contains data for TMU channel 4
+          TRIMINFO at 0x10068000 contains data for TMU channel 2
+    minItems: 1
+
+  '#thermal-sensor-cells': true
+
+  vtmu-supply:
+    description: The regulator node supplying voltage to TMU.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-tmu-ext-triminfo
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional clock to access the shared registers (e.g. TRIMINFO) of TMU
+                channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_triminfo_apbif
+        reg:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-tmu
+              - samsung,exynos7-tmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional special clock for functional operation of TMU channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_sclk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-tmu
+              - samsung,exynos4412-tmu
+              - samsung,exynos4210-tmu
+              - samsung,exynos5250-tmu
+              - samsung,exynos5260-tmu
+              - samsung,exynos5420-tmu
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    tmu@100c0000 {
+        compatible = "samsung,exynos4412-tmu";
+        reg = <0x100C0000 0x100>;
+        interrupt-parent = <&combiner>;
+        interrupts = <2 4>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock CLK_TMU_APBIF>;
+        clock-names = "tmu_apbif";
+        vtmu-supply = <&ldo10_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10068000 {
+        compatible = "samsung,exynos5420-tmu-ext-triminfo";
+        reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock 318>, <&clock 318>; /* CLK_TMU */
+        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+        vtmu-supply = <&ldo7_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10060000 {
+        compatible = "samsung,exynos5433-tmu";
+        reg = <0x10060000 0x200>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&cmu_peris 3>, /* CLK_PCLK_TMU0_APBIF */
+                 <&cmu_peris 35>; /* CLK_SCLK_TMU0 */
+        clock-names = "tmu_apbif", "tmu_sclk";
+        vtmu-supply = <&ldo3_reg>;
+    };

Documentation/driver-api/thermal/index.rst

@@ -17,3 +17,4 @@ Thermal
    intel_powerclamp
    nouveau_thermal
    x86_pkg_temperature_thermal
+   intel_dptf

Documentation/driver-api/thermal/intel_dptf.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================================
+Intel(R) Dynamic Platform and Thermal Framework Sysfs Interface
+===============================================================
+
+:Copyright: |copy| 2022 Intel Corporation
+
+:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+
+Introduction
+------------
+
+Intel(R) Dynamic Platform and Thermal Framework (DPTF) is a platform
+level hardware/software solution for power and thermal management.
+
+As a container for multiple power/thermal technologies, DPTF provides
+a coordinated approach for different policies to effect the hardware
+state of a system.
+
+Since it is a platform level framework, this has several components.
+Some parts of the technology is implemented in the firmware and uses
+ACPI and PCI devices to expose various features for monitoring and
+control. Linux has a set of kernel drivers exposing hardware interface
+to user space. This allows user space thermal solutions like
+"Linux Thermal Daemon" to read platform specific thermal and power
+tables to deliver adequate performance while keeping the system under
+thermal limits.
+
+DPTF ACPI Drivers interface
+----------------------------
+
+:file:`/sys/bus/platform/devices/<N>/uuids`, where <N>
+=INT3400|INTC1040|INTC1041|INTC10A0
+
+``available_uuids`` (RO)
+	A set of UUIDs strings presenting available policies
+	which should be notified to the firmware when the
+	user space can support those policies.
+
+	UUID strings:
+
+	"42A441D6-AE6A-462b-A84B-4A8CE79027D3" : Passive 1
+
+	"3A95C389-E4B8-4629-A526-C52C88626BAE" : Active
+
+	"97C68AE7-15FA-499c-B8C9-5DA81D606E0A" : Critical
+
+	"63BE270F-1C11-48FD-A6F7-3AF253FF3E2D" : Adaptive performance
+
+	"5349962F-71E6-431D-9AE8-0A635B710AEE" : Emergency call
+
+	"9E04115A-AE87-4D1C-9500-0F3E340BFE75" : Passive 2
+
+	"F5A35014-C209-46A4-993A-EB56DE7530A1" : Power Boss
+
+	"6ED722A7-9240-48A5-B479-31EEF723D7CF" : Virtual Sensor
+
+	"16CAF1B7-DD38-40ED-B1C1-1B8A1913D531" : Cooling mode
+
+	"BE84BABF-C4D4-403D-B495-3128FD44dAC1" : HDC
+
+``current_uuid`` (RW)
+	User space can write strings from available UUIDs, one at a
+	time.
+
+:file:`/sys/bus/platform/devices/<N>/`, where <N>
+=INT3400|INTC1040|INTC1041|INTC10A0
+
+``imok`` (WO)
+	User space daemon write 1 to respond to firmware event
+	for sending keep alive notification. User space receives
+	THERMAL_EVENT_KEEP_ALIVE kobject uevent notification when
+	firmware calls for user space to respond with imok ACPI
+	method.
+
+``odvp*`` (RO)
+	Firmware thermal status variable values. Thermal tables
+	calls for different processing based on these variable
+	values.
+
+``data_vault`` (RO)
+	Binary thermal table. Refer to
+	https:/github.com/intel/thermal_daemon for decoding
+	thermal table.
+
+
+ACPI Thermal Relationship table interface
+------------------------------------------
+
+:file:`/dev/acpi_thermal_rel`
+
+	This device provides IOCTL interface to read standard ACPI
+	thermal relationship tables via ACPI methods _TRT and _ART.
+	These IOCTLs are defined in
+	drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h
+
+	IOCTLs:
+
+	ACPI_THERMAL_GET_TRT_LEN: Get length of TRT table
+
+	ACPI_THERMAL_GET_ART_LEN: Get length of ART table
+
+	ACPI_THERMAL_GET_TRT_COUNT: Number of records in TRT table
+
+	ACPI_THERMAL_GET_ART_COUNT: Number of records in ART table
+
+	ACPI_THERMAL_GET_TRT: Read binary TRT table, length to read is
+	provided via argument to ioctl().
+
+	ACPI_THERMAL_GET_ART: Read binary ART table, length to read is
+	provided via argument to ioctl().
+
+DPTF ACPI Sensor drivers
+-------------------------
+
+DPTF Sensor drivers are presented as standard thermal sysfs thermal_zone.
+
+
+DPTF ACPI Cooling drivers
+--------------------------
+
+DPTF cooling drivers are presented as standard thermal sysfs cooling_device.
+
+
+DPTF Processor thermal PCI Driver interface
+--------------------------------------------
+
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/power_limits/`
+
+Refer to Documentation/power/powercap/powercap.rst for powercap
+ABI.
+
+``power_limit_0_max_uw`` (RO)
+	Maximum powercap sysfs constraint_0_power_limit_uw for Intel RAPL
+
+``power_limit_0_step_uw`` (RO)
+	Power limit increment/decrements for Intel RAPL constraint 0 power limit
+
+``power_limit_0_min_uw`` (RO)
+	Minimum powercap sysfs constraint_0_power_limit_uw for Intel RAPL
+
+``power_limit_0_tmin_us`` (RO)
+	Minimum powercap sysfs constraint_0_time_window_us for Intel RAPL
+
+``power_limit_0_tmax_us`` (RO)
+	Maximum powercap sysfs constraint_0_time_window_us for Intel RAPL
+
+``power_limit_1_max_uw`` (RO)
+	Maximum powercap sysfs constraint_1_power_limit_uw for Intel RAPL
+
+``power_limit_1_step_uw`` (RO)
+	Power limit increment/decrements for Intel RAPL constraint 1 power limit
+
+``power_limit_1_min_uw`` (RO)
+	Minimum powercap sysfs constraint_1_power_limit_uw for Intel RAPL
+
+``power_limit_1_tmin_us`` (RO)
+	Minimum powercap sysfs constraint_1_time_window_us for Intel RAPL
+
+``power_limit_1_tmax_us`` (RO)
+	Maximum powercap sysfs constraint_1_time_window_us for Intel RAPL
+
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/`
+
+``tcc_offset_degree_celsius`` (RW)
+	TCC offset from the critical temperature where hardware will throttle
+	CPU.
+
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/workload_request`
+
+``workload_available_types`` (RO)
+	Available workload types. User space can specify one of the workload type
+	it is currently executing via workload_type. For example: idle, bursty,
+	sustained etc.
+
+``workload_type`` (RW)
+	User space can specify any one of the available workload type using
+	this interface.
+
+DPTF Processor thermal RFIM interface
+--------------------------------------------
+
+RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator)
+and DDR (Double Data Rate)frequencies to avoid RF interference with WiFi and 5G.
+
+Switching voltage regulators (VR) generate radiated EMI or RFI at the
+fundamental frequency and its harmonics. Some harmonics may interfere
+with very sensitive wireless receivers such as Wi-Fi and cellular that
+are integrated into host systems like notebook PCs.  One of mitigation
+methods is requesting SOC integrated VR (IVR) switching frequency to a
+small % and shift away the switching noise harmonic interference from
+radio channels.  OEM or ODMs can use the driver to control SOC IVR
+operation within the range where it does not impact IVR performance.
+
+DRAM devices of DDR IO interface and their power plane can generate EMI
+at the data rates. Similar to IVR control mechanism, Intel offers a
+mechanism by which DDR data rates can be changed if several conditions
+are met: there is strong RFI interference because of DDR; CPU power
+management has no other restriction in changing DDR data rates;
+PC ODMs enable this feature (real time DDR RFI Mitigation referred to as
+DDR-RFIM) for Wi-Fi from BIOS.
+
+
+FIVR attributes
+
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/fivr/`
+
+``vco_ref_code_lo`` (RW)
+	The VCO reference code is an 11-bit field and controls the FIVR
+	switching frequency. This is the 3-bit LSB field.
+
+``vco_ref_code_hi`` (RW)
+	The VCO reference code is an 11-bit field and controls the FIVR
+	switching frequency. This is the 8-bit MSB field.
+
+``spread_spectrum_pct`` (RW)
+	Set the FIVR spread spectrum clocking percentage
+
+``spread_spectrum_clk_enable`` (RW)
+	Enable/disable of the FIVR spread spectrum clocking feature
+
+``rfi_vco_ref_code`` (RW)
+	This field is a read only status register which reflects the
+	current FIVR switching frequency
+
+``fivr_fffc_rev`` (RW)
+	This field indicated the revision of the FIVR HW.
+
+
+DVFS attributes
+
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/dvfs/`
+
+``rfi_restriction_run_busy`` (RW)
+	Request the restriction of specific DDR data rate and set this
+	value 1. Self reset to 0 after operation.
+
+``rfi_restriction_err_code`` (RW)
+	0 :Request is accepted, 1:Feature disabled,
+	2: the request restricts more points than it is allowed
+
+``rfi_restriction_data_rate_Delta`` (RW)
+	Restricted DDR data rate for RFI protection: Lower Limit
+
+``rfi_restriction_data_rate_Base`` (RW)
+	Restricted DDR data rate for RFI protection: Upper Limit
+
+``ddr_data_rate_point_0`` (RO)
+	DDR data rate selection 1st point
+
+``ddr_data_rate_point_1`` (RO)
+	DDR data rate selection 2nd point
+
+``ddr_data_rate_point_2`` (RO)
+	DDR data rate selection 3rd point
+
+``ddr_data_rate_point_3`` (RO)
+	DDR data rate selection 4th point
+
+``rfi_disable (RW)``
+	Disable DDR rate change feature
+
+DPTF Power supply and Battery Interface
+----------------------------------------
+
+Refer to Documentation/ABI/testing/sysfs-platform-dptf
+
+DPTF Fan Control
+----------------------------------------
+
+Refer to Documentation/admin-guide/acpi/fan_performance_states.rst

Documentation/x86/index.rst

@@ -21,6 +21,7 @@ x86-specific Documentation
    tlb
    mtrr
    pat
+   intel-hfi
    intel-iommu
    intel_txt
    amd-memory-encryption

Documentation/x86/intel-hfi.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Hardware-Feedback Interface for scheduling on Intel Hardware
+============================================================
+
+Overview
+--------
+
+Intel has described the Hardware Feedback Interface (HFI) in the Intel 64 and
+IA-32 Architectures Software Developer's Manual (Intel SDM) Volume 3 Section
+14.6 [1]_.
+
+The HFI gives the operating system a performance and energy efficiency
+capability data for each CPU in the system. Linux can use the information from
+the HFI to influence task placement decisions.
+
+The Hardware Feedback Interface
+-------------------------------
+
+The Hardware Feedback Interface provides to the operating system information
+about the performance and energy efficiency of each CPU in the system. Each
+capability is given as a unit-less quantity in the range [0-255]. Higher values
+indicate higher capability. Energy efficiency and performance are reported in
+separate capabilities. Even though on some systems these two metrics may be
+related, they are specified as independent capabilities in the Intel SDM.
+
+These capabilities may change at runtime as a result of changes in the
+operating conditions of the system or the action of external factors. The rate
+at which these capabilities are updated is specific to each processor model. On
+some models, capabilities are set at boot time and never change. On others,
+capabilities may change every tens of milliseconds. For instance, a remote
+mechanism may be used to lower Thermal Design Power. Such change can be
+reflected in the HFI. Likewise, if the system needs to be throttled due to
+excessive heat, the HFI may reflect reduced performance on specific CPUs.
+
+The kernel or a userspace policy daemon can use these capabilities to modify
+task placement decisions. For instance, if either the performance or energy
+capabilities of a given logical processor becomes zero, it is an indication that
+the hardware recommends to the operating system to not schedule any tasks on
+that processor for performance or energy efficiency reasons, respectively.
+
+Implementation details for Linux
+--------------------------------
+
+The infrastructure to handle thermal event interrupts has two parts. In the
+Local Vector Table of a CPU's local APIC, there exists a register for the
+Thermal Monitor Register. This register controls how interrupts are delivered
+to a CPU when the thermal monitor generates and interrupt. Further details
+can be found in the Intel SDM Vol. 3 Section 10.5 [1]_.
+
+The thermal monitor may generate interrupts per CPU or per package. The HFI
+generates package-level interrupts. This monitor is configured and initialized
+via a set of machine-specific registers. Specifically, the HFI interrupt and
+status are controlled via designated bits in the IA32_PACKAGE_THERM_INTERRUPT
+and IA32_PACKAGE_THERM_STATUS registers, respectively. There exists one HFI
+table per package. Further details can be found in the Intel SDM Vol. 3
+Section 14.9 [1]_.
+
+The hardware issues an HFI interrupt after updating the HFI table and is ready
+for the operating system to consume it. CPUs receive such interrupt via the
+thermal entry in the Local APIC's Local Vector Table.
+
+When servicing such interrupt, the HFI driver parses the updated table and
+relays the update to userspace using the thermal notification framework. Given
+that there may be many HFI updates every second, the updates relayed to
+userspace are throttled at a rate of CONFIG_HZ jiffies.
+
+References
+----------
+
+.. [1] https://www.intel.com/sdm

MAINTAINERS

@@ -17143,11 +17143,12 @@ S:	Supported
 F:	drivers/net/ethernet/samsung/sxgbe/
 
 SAMSUNG THERMAL DRIVER
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+M:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
-S:	Supported
-T:	git https://github.com/lmajewski/linux-samsung-thermal.git
+S:	Maintained
+F:	Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
 F:	drivers/thermal/samsung/
 
 SAMSUNG USB2 PHY DRIVER

arch/x86/include/asm/cpufeatures.h

@@ -327,6 +327,7 @@
 #define X86_FEATURE_HWP_ACT_WINDOW	(14*32+ 9) /* HWP Activity Window */
 #define X86_FEATURE_HWP_EPP		(14*32+10) /* HWP Energy Perf. Preference */
 #define X86_FEATURE_HWP_PKG_REQ		(14*32+11) /* HWP Package Level Request */
+#define X86_FEATURE_HFI			(14*32+19) /* Hardware Feedback Interface */
 
 /* AMD SVM Feature Identification, CPUID level 0x8000000a (EDX), word 15 */
 #define X86_FEATURE_NPT			(15*32+ 0) /* Nested Page Table support */

arch/x86/include/asm/msr-index.h

@@ -705,12 +705,14 @@
 
 #define PACKAGE_THERM_STATUS_PROCHOT		(1 << 0)
 #define PACKAGE_THERM_STATUS_POWER_LIMIT	(1 << 10)
+#define PACKAGE_THERM_STATUS_HFI_UPDATED	(1 << 26)
 
 #define MSR_IA32_PACKAGE_THERM_INTERRUPT	0x000001b2
 
 #define PACKAGE_THERM_INT_HIGH_ENABLE		(1 << 0)
 #define PACKAGE_THERM_INT_LOW_ENABLE		(1 << 1)
 #define PACKAGE_THERM_INT_PLN_ENABLE		(1 << 24)
+#define PACKAGE_THERM_INT_HFI_ENABLE		(1 << 25)
 
 /* Thermal Thresholds Support */
 #define THERM_INT_THRESHOLD0_ENABLE    (1 << 15)
@@ -959,4 +961,8 @@
 #define MSR_VM_IGNNE                    0xc0010115
 #define MSR_VM_HSAVE_PA                 0xc0010117
 
+/* Hardware Feedback Interface */
+#define MSR_IA32_HW_FEEDBACK_PTR        0x17d0
+#define MSR_IA32_HW_FEEDBACK_CONFIG     0x17d1
+
 #endif /* _ASM_X86_MSR_INDEX_H */

drivers/thermal/broadcom/brcmstb_thermal.c

@@ -351,7 +351,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 
 	priv->thermal = thermal;
 
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq >= 0) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 						brcmstb_tmon_irq_thread,

drivers/thermal/intel/Kconfig

@@ -99,3 +99,17 @@ config INTEL_MENLOW
 	  Intel Menlow platform.
 
 	  If unsure, say N.
+
+config INTEL_HFI_THERMAL
+	bool "Intel Hardware Feedback Interface"
+	depends on NET
+	depends on CPU_SUP_INTEL
+	depends on X86_THERMAL_VECTOR
+	select THERMAL_NETLINK
+	help
+	  Select this option to enable the Hardware Feedback Interface. If
+	  selected, hardware provides guidance to the operating system on
+	  the performance and energy efficiency capabilities of each CPU.
+	  These capabilities may change as a result of changes in the operating
+	  conditions of the system such power and thermal limits. If selected,
+	  the kernel relays updates in CPUs' capabilities to userspace.

drivers/thermal/intel/Makefile

@@ -13,3 +13,4 @@ obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
 obj-$(CONFIG_INTEL_TCC_COOLING)	+= intel_tcc_cooling.o
 obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
 obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
+obj-$(CONFIG_INTEL_HFI_THERMAL) += intel_hfi.o

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

@@ -72,7 +72,6 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
 	int i;
 	int nr_bad_entries = 0;
 	struct trt *trts;
-	struct acpi_device *adev;
 	union acpi_object *p;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	struct acpi_buffer element = { 0, NULL };
@@ -112,12 +111,10 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
 		if (!create_dev)
 			continue;
 
-		result = acpi_bus_get_device(trt->source, &adev);
-		if (result)
+		if (!acpi_fetch_acpi_dev(trt->source))
 			pr_warn("Failed to get source ACPI device\n");
 
-		result = acpi_bus_get_device(trt->target, &adev);
-		if (result)
+		if (!acpi_fetch_acpi_dev(trt->target))
 			pr_warn("Failed to get target ACPI device\n");
 	}
 
@@ -149,7 +146,6 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
 	int i;
 	int nr_bad_entries = 0;
 	struct art *arts;
-	struct acpi_device *adev;
 	union acpi_object *p;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	struct acpi_buffer element = { 0, NULL };
@@ -191,16 +187,11 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
 		if (!create_dev)
 			continue;
 
-		if (art->source) {
-			result = acpi_bus_get_device(art->source, &adev);
-			if (result)
-				pr_warn("Failed to get source ACPI device\n");
-		}
-		if (art->target) {
-			result = acpi_bus_get_device(art->target, &adev);
-			if (result)
-				pr_warn("Failed to get target ACPI device\n");
-		}
+		if (!acpi_fetch_acpi_dev(art->source))
+			pr_warn("Failed to get source ACPI device\n");
+
+		if (!acpi_fetch_acpi_dev(art->target))
+			pr_warn("Failed to get target ACPI device\n");
 	}
 
 	*artp = arts;

drivers/thermal/intel/int340x_thermal/int3400_thermal.c

@@ -17,8 +17,8 @@
 #define INT3400_KEEP_ALIVE 0xA0
 
 enum int3400_thermal_uuid {
+	INT3400_THERMAL_ACTIVE = 0,
 	INT3400_THERMAL_PASSIVE_1,
-	INT3400_THERMAL_ACTIVE,
 	INT3400_THERMAL_CRITICAL,
 	INT3400_THERMAL_ADAPTIVE_PERFORMANCE,
 	INT3400_THERMAL_EMERGENCY_CALL_MODE,
@@ -31,8 +31,8 @@ enum int3400_thermal_uuid {
 };
 
 static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {
-	"42A441D6-AE6A-462b-A84B-4A8CE79027D3",
 	"3A95C389-E4B8-4629-A526-C52C88626BAE",
+	"42A441D6-AE6A-462b-A84B-4A8CE79027D3",
 	"97C68AE7-15FA-499c-B8C9-5DA81D606E0A",
 	"63BE270F-1C11-48FD-A6F7-3AF253FF3E2D",
 	"5349962F-71E6-431D-9AE8-0A635B710AEE",
@@ -53,12 +53,13 @@ struct int3400_thermal_priv {
 	struct art *arts;
 	int trt_count;
 	struct trt *trts;
-	u8 uuid_bitmap;
+	u32 uuid_bitmap;
 	int rel_misc_dev_res;
 	int current_uuid_index;
 	char *data_vault;
 	int odvp_count;
 	int *odvp;
+	u32 os_uuid_mask;
 	struct odvp_attr *odvp_attrs;
 };
 
@@ -142,12 +143,55 @@ static ssize_t current_uuid_show(struct device *dev,
 				 struct device_attribute *devattr, char *buf)
 {
 	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
+	int i, length = 0;
 
-	if (priv->current_uuid_index == -1)
-		return sprintf(buf, "INVALID\n");
+	if (priv->current_uuid_index > 0)
+		return sprintf(buf, "%s\n",
+			       int3400_thermal_uuids[priv->current_uuid_index]);
 
-	return sprintf(buf, "%s\n",
-		       int3400_thermal_uuids[priv->current_uuid_index]);
+	for (i = 0; i <= INT3400_THERMAL_CRITICAL; i++) {
+		if (priv->os_uuid_mask & BIT(i))
+			length += scnprintf(&buf[length],
+					    PAGE_SIZE - length,
+					    "%s\n",
+					    int3400_thermal_uuids[i]);
+	}
+
+	if (length)
+		return length;
+
+	return sprintf(buf, "INVALID\n");
+}
+
+static int int3400_thermal_run_osc(acpi_handle handle, char *uuid_str, int *enable)
+{
+	u32 ret, buf[2];
+	acpi_status status;
+	int result = 0;
+	struct acpi_osc_context context = {
+		.uuid_str = NULL,
+		.rev = 1,
+		.cap.length = 8,
+	};
+
+	context.uuid_str = uuid_str;
+
+	buf[OSC_QUERY_DWORD] = 0;
+	buf[OSC_SUPPORT_DWORD] = *enable;
+
+	context.cap.pointer = buf;
+
+	status = acpi_run_osc(handle, &context);
+	if (ACPI_SUCCESS(status)) {
+		ret = *((u32 *)(context.ret.pointer + 4));
+		if (ret != *enable)
+			result = -EPERM;
+	} else
+		result = -EPERM;
+
+	kfree(context.ret.pointer);
+
+	return result;
 }
 
 static ssize_t current_uuid_store(struct device *dev,
@@ -164,16 +208,47 @@ static ssize_t current_uuid_store(struct device *dev,
 			 * If we have a list of supported UUIDs, make sure
 			 * this one is supported.
 			 */
-			if (priv->uuid_bitmap &&
-			    !(priv->uuid_bitmap & (1 << i)))
+			if (priv->uuid_bitmap & BIT(i)) {
+				priv->current_uuid_index = i;
+				return count;
+			}
+
+			/*
+			 * There is support of only 3 policies via the new
+			 * _OSC to inform OS capability:
+			 * INT3400_THERMAL_ACTIVE
+			 * INT3400_THERMAL_PASSIVE_1
+			 * INT3400_THERMAL_CRITICAL
+			 */
+
+			if (i > INT3400_THERMAL_CRITICAL)
 				return -EINVAL;
 
-			priv->current_uuid_index = i;
-			return count;
+			priv->os_uuid_mask |= BIT(i);
+
+			break;
 		}
 	}
 
-	return -EINVAL;
+	if (priv->os_uuid_mask) {
+		int cap, ret;
+
+		/*
+		 * Capability bits:
+		 * Bit 0: set to 1 to indicate DPTF is active
+		 * Bi1 1: set to 1 to active cooling is supported by user space daemon
+		 * Bit 2: set to 1 to passive cooling is supported by user space daemon
+		 * Bit 3: set to 1 to critical trip is handled by user space daemon
+		 */
+		cap = ((priv->os_uuid_mask << 1) | 0x01);
+		ret = int3400_thermal_run_osc(priv->adev->handle,
+					      "b23ba85d-c8b7-3542-88de-8de2ffcfd698",
+					      &cap);
+		if (ret)
+			return ret;
+	}
+
+	return count;
 }
 
 static DEVICE_ATTR_RW(current_uuid);
@@ -236,41 +311,6 @@ static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv)
 	return result;
 }
 
-static int int3400_thermal_run_osc(acpi_handle handle,
-				enum int3400_thermal_uuid uuid, bool enable)
-{
-	u32 ret, buf[2];
-	acpi_status status;
-	int result = 0;
-	struct acpi_osc_context context = {
-		.uuid_str = NULL,
-		.rev = 1,
-		.cap.length = 8,
-	};
-
-	if (uuid < 0 || uuid >= INT3400_THERMAL_MAXIMUM_UUID)
-		return -EINVAL;
-
-	context.uuid_str = int3400_thermal_uuids[uuid];
-
-	buf[OSC_QUERY_DWORD] = 0;
-	buf[OSC_SUPPORT_DWORD] = enable;
-
-	context.cap.pointer = buf;
-
-	status = acpi_run_osc(handle, &context);
-	if (ACPI_SUCCESS(status)) {
-		ret = *((u32 *)(context.ret.pointer + 4));
-		if (ret != enable)
-			result = -EPERM;
-	} else
-		result = -EPERM;
-
-	kfree(context.ret.pointer);
-
-	return result;
-}
-
 static ssize_t odvp_show(struct kobject *kobj, struct kobj_attribute *attr,
 			 char *buf)
 {
@@ -426,10 +466,18 @@ static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
 	if (!priv)
 		return -EINVAL;
 
-	if (mode != thermal->mode)
+	if (mode != thermal->mode) {
+		int enabled;
+
+		if (priv->current_uuid_index < 0 ||
+		    priv->current_uuid_index >= INT3400_THERMAL_MAXIMUM_UUID)
+			return -EINVAL;
+
+		enabled = (mode == THERMAL_DEVICE_ENABLED);
 		result = int3400_thermal_run_osc(priv->adev->handle,
-						priv->current_uuid_index,
-						mode == THERMAL_DEVICE_ENABLED);
+						 int3400_thermal_uuids[priv->current_uuid_index],
+						 &enabled);
+	}
 
 
 	evaluate_odvp(priv);
@@ -468,6 +516,11 @@ static void int3400_setup_gddv(struct int3400_thermal_priv *priv)
 	priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
 				   obj->package.elements[0].buffer.length,
 				   GFP_KERNEL);
+	if (!priv->data_vault) {
+		kfree(buffer.pointer);
+		return;
+	}
+
 	bin_attr_data_vault.private = priv->data_vault;
 	bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
 	kfree(buffer.pointer);

drivers/thermal/intel/intel_hfi.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _INTEL_HFI_H
+#define _INTEL_HFI_H
+
+#if defined(CONFIG_INTEL_HFI_THERMAL)
+void __init intel_hfi_init(void);
+void intel_hfi_online(unsigned int cpu);
+void intel_hfi_offline(unsigned int cpu);
+void intel_hfi_process_event(__u64 pkg_therm_status_msr_val);
+#else
+static inline void intel_hfi_init(void) { }
+static inline void intel_hfi_online(unsigned int cpu) { }
+static inline void intel_hfi_offline(unsigned int cpu) { }
+static inline void intel_hfi_process_event(__u64 pkg_therm_status_msr_val) { }
+#endif /* CONFIG_INTEL_HFI_THERMAL */
+
+#endif /* _INTEL_HFI_H */

drivers/thermal/intel/intel_powerclamp.c

@@ -556,12 +556,9 @@ static void end_power_clamp(void)
 	 * stop faster.
 	 */
 	clamping = false;
-	if (bitmap_weight(cpu_clamping_mask, num_possible_cpus())) {
-		for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) {
-			pr_debug("clamping worker for cpu %d alive, destroy\n",
-				 i);
-			stop_power_clamp_worker(i);
-		}
+	for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) {
+		pr_debug("clamping worker for cpu %d alive, destroy\n", i);
+		stop_power_clamp_worker(i);
 	}
 }
 

drivers/thermal/intel/therm_throt.c

@@ -32,6 +32,7 @@
 #include <asm/irq.h>
 #include <asm/msr.h>
 
+#include "intel_hfi.h"
 #include "thermal_interrupt.h"
 
 /* How long to wait between reporting thermal events */
@@ -475,6 +476,13 @@ static int thermal_throttle_online(unsigned int cpu)
 	INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work);
 	INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work);
 
+	/*
+	 * The first CPU coming online will enable the HFI. Usually this causes
+	 * hardware to issue an HFI thermal interrupt. Such interrupt will reach
+	 * the CPU once we enable the thermal vector in the local APIC.
+	 */
+	intel_hfi_online(cpu);
+
 	/* Unmask the thermal vector after the above workqueues are initialized. */
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
@@ -492,6 +500,8 @@ static int thermal_throttle_offline(unsigned int cpu)
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED);
 
+	intel_hfi_offline(cpu);
+
 	cancel_delayed_work_sync(&state->package_throttle.therm_work);
 	cancel_delayed_work_sync(&state->core_throttle.therm_work);
 
@@ -509,6 +519,8 @@ static __init int thermal_throttle_init_device(void)
 	if (!atomic_read(&therm_throt_en))
 		return 0;
 
+	intel_hfi_init();
+
 	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online",
 				thermal_throttle_online,
 				thermal_throttle_offline);
@@ -608,6 +620,10 @@ void intel_thermal_interrupt(void)
 					PACKAGE_THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
 					PACKAGE_LEVEL);
+
+		if (this_cpu_has(X86_FEATURE_HFI))
+			intel_hfi_process_event(msr_val &
+						PACKAGE_THERM_STATUS_HFI_UPDATED);
 	}
 }
 
@@ -717,6 +733,12 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
 			      l | (PACKAGE_THERM_INT_LOW_ENABLE
 				| PACKAGE_THERM_INT_HIGH_ENABLE), h);
+
+		if (cpu_has(c, X86_FEATURE_HFI)) {
+			rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			      l | PACKAGE_THERM_INT_HFI_ENABLE, h);
+		}
 	}
 
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);

drivers/thermal/qcom/lmh.c

@@ -28,6 +28,8 @@
 
 #define LMH_REG_DCVS_INTR_CLR		0x8
 
+#define LMH_ENABLE_ALGOS		1
+
 struct lmh_hw_data {
 	void __iomem *base;
 	struct irq_domain *domain;
@@ -90,6 +92,7 @@ static int lmh_probe(struct platform_device *pdev)
 	struct device_node *cpu_node;
 	struct lmh_hw_data *lmh_data;
 	int temp_low, temp_high, temp_arm, cpu_id, ret;
+	unsigned int enable_alg;
 	u32 node_id;
 
 	lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL);
@@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
 	if (!qcom_scm_lmh_dcvsh_available())
 		return -EINVAL;
 
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling current subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret) {
-		dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
-		return ret;
-	}
-
-	ret = qcom_scm_lmh_profile_change(0x1);
-	if (ret) {
-		dev_err(dev, "Error %d changing profile\n", ret);
-		return ret;
+	enable_alg = (uintptr_t)of_device_get_match_data(dev);
+
+	if (enable_alg) {
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret) {
+			dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+			return ret;
+		}
+
+		ret = qcom_scm_lmh_profile_change(0x1);
+		if (ret) {
+			dev_err(dev, "Error %d changing profile\n", ret);
+			return ret;
+		}
 	}
 
 	/* Set default thermal trips */
@@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id lmh_table[] = {
-	{ .compatible = "qcom,sdm845-lmh", },
+	{ .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS},
+	{ .compatible = "qcom,sm8150-lmh", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, lmh_table);

drivers/thermal/qcom/tsens.c

@@ -18,6 +18,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/thermal.h>
+#include "../thermal_hwmon.h"
 #include "tsens.h"
 
 /**
@@ -1060,6 +1061,10 @@ static int tsens_register(struct tsens_priv *priv)
 		priv->sensor[i].tzd = tzd;
 		if (priv->ops->enable)
 			priv->ops->enable(priv, i);
+
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(priv->dev,
+				 "Failed to add hwmon sysfs attributes\n");
 	}
 
 	/* VER_0 require to set MIN and MAX THRESH

drivers/thermal/tegra/tegra-bpmp-thermal.c

@@ -52,6 +52,8 @@ static int tegra_bpmp_thermal_get_temp(void *data, int *out_temp)
 	err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
 	if (err)
 		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
 
 	*out_temp = reply.get_temp.temp;
 
@@ -63,6 +65,7 @@ static int tegra_bpmp_thermal_set_trips(void *data, int low, int high)
 	struct tegra_bpmp_thermal_zone *zone = data;
 	struct mrq_thermal_host_to_bpmp_request req;
 	struct tegra_bpmp_message msg;
+	int err;
 
 	memset(&req, 0, sizeof(req));
 	req.type = CMD_THERMAL_SET_TRIP;
@@ -76,7 +79,13 @@ static int tegra_bpmp_thermal_set_trips(void *data, int low, int high)
 	msg.tx.data = &req;
 	msg.tx.size = sizeof(req);
 
-	return tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
+	err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static void tz_device_update_work_fn(struct work_struct *work)
@@ -140,6 +149,8 @@ static int tegra_bpmp_thermal_get_num_zones(struct tegra_bpmp *bpmp,
 	err = tegra_bpmp_transfer(bpmp, &msg);
 	if (err)
 		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
 
 	*num_zones = reply.get_num_zones.num;
 

drivers/thermal/thermal_netlink.c

@@ -43,6 +43,11 @@ static const struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] =
 	[THERMAL_GENL_ATTR_CDEV_MAX_STATE]	= { .type = NLA_U32 },
 	[THERMAL_GENL_ATTR_CDEV_NAME]		= { .type = NLA_STRING,
 						    .len = THERMAL_NAME_LENGTH },
+	/* CPU capabilities */
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY]	= { .type = NLA_U32 },
 };
 
 struct param {
@@ -58,6 +63,8 @@ struct param {
 	int temp;
 	int cdev_state;
 	int cdev_max_state;
+	struct thermal_genl_cpu_caps *cpu_capabilities;
+	int cpu_capabilities_count;
 };
 
 typedef int (*cb_t)(struct param *);
@@ -190,6 +197,42 @@ static int thermal_genl_event_gov_change(struct param *p)
 	return 0;
 }
 
+static int thermal_genl_event_cpu_capability_change(struct param *p)
+{
+	struct thermal_genl_cpu_caps *cpu_cap = p->cpu_capabilities;
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_cap;
+	int i;
+
+	start_cap = nla_nest_start(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY);
+	if (!start_cap)
+		return -EMSGSIZE;
+
+	for (i = 0; i < p->cpu_capabilities_count; ++i) {
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_ID,
+				cpu_cap->cpu))
+			goto out_cancel_nest;
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE,
+				cpu_cap->performance))
+			goto out_cancel_nest;
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY,
+				cpu_cap->efficiency))
+			goto out_cancel_nest;
+
+		++cpu_cap;
+	}
+
+	nla_nest_end(msg, start_cap);
+
+	return 0;
+out_cancel_nest:
+	nla_nest_cancel(msg, start_cap);
+
+	return -EMSGSIZE;
+}
+
 int thermal_genl_event_tz_delete(struct param *p)
 	__attribute__((alias("thermal_genl_event_tz")));
 
@@ -219,6 +262,7 @@ static cb_t event_cb[] = {
 	[THERMAL_GENL_EVENT_CDEV_DELETE]	= thermal_genl_event_cdev_delete,
 	[THERMAL_GENL_EVENT_CDEV_STATE_UPDATE]	= thermal_genl_event_cdev_state_update,
 	[THERMAL_GENL_EVENT_TZ_GOV_CHANGE]	= thermal_genl_event_gov_change,
+	[THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE] = thermal_genl_event_cpu_capability_change,
 };
 
 /*
@@ -356,6 +400,15 @@ int thermal_notify_tz_gov_change(int tz_id, const char *name)
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_GOV_CHANGE, &p);
 }
 
+int thermal_genl_cpu_capability_event(int count,
+				      struct thermal_genl_cpu_caps *caps)
+{
+	struct param p = { .cpu_capabilities_count = count, .cpu_capabilities = caps };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE, &p);
+}
+EXPORT_SYMBOL_GPL(thermal_genl_cpu_capability_event);
+
 /*************************** Command encoding ********************************/
 
 static int __thermal_genl_cmd_tz_get_id(struct thermal_zone_device *tz,

drivers/thermal/thermal_netlink.h

@@ -4,6 +4,12 @@
  *  Author: Daniel Lezcano <daniel.lezcano@linaro.org>
  */
 
+struct thermal_genl_cpu_caps {
+	int cpu;
+	int performance;
+	int efficiency;
+};
+
 /* Netlink notification function */
 #ifdef CONFIG_THERMAL_NETLINK
 int __init thermal_netlink_init(void);
@@ -23,6 +29,8 @@ int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state);
 int thermal_notify_cdev_delete(int cdev_id);
 int thermal_notify_tz_gov_change(int tz_id, const char *name);
 int thermal_genl_sampling_temp(int id, int temp);
+int thermal_genl_cpu_capability_event(int count,
+				      struct thermal_genl_cpu_caps *caps);
 #else
 static inline int thermal_netlink_init(void)
 {
@@ -101,4 +109,10 @@ static inline int thermal_genl_sampling_temp(int id, int temp)
 {
 	return 0;
 }
+
+static inline int thermal_genl_cpu_capability_event(int count, struct thermal_genl_cpu_caps *caps)
+{
+	return 0;
+}
+
 #endif /* CONFIG_THERMAL_NETLINK */

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -21,6 +21,7 @@
 
 #include "ti-thermal.h"
 #include "ti-bandgap.h"
+#include "../thermal_hwmon.h"
 
 /* common data structures */
 struct ti_thermal_data {
@@ -106,14 +107,6 @@ static inline int __ti_thermal_get_temp(void *devdata, int *temp)
 	return ret;
 }
 
-static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
-				      int *temp)
-{
-	struct ti_thermal_data *data = thermal->devdata;
-
-	return __ti_thermal_get_temp(data, temp);
-}
-
 static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend)
 {
 	struct ti_thermal_data *data = p;
@@ -189,6 +182,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 	ti_bandgap_set_sensor_data(bgp, id, data);
 	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
 
+	if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
+		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
+
 	return 0;
 }
 

include/uapi/linux/thermal.h

@@ -44,7 +44,10 @@ enum thermal_genl_attr {
 	THERMAL_GENL_ATTR_CDEV_MAX_STATE,
 	THERMAL_GENL_ATTR_CDEV_NAME,
 	THERMAL_GENL_ATTR_GOV_NAME,
-
+	THERMAL_GENL_ATTR_CPU_CAPABILITY,
+	THERMAL_GENL_ATTR_CPU_CAPABILITY_ID,
+	THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE,
+	THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY,
 	__THERMAL_GENL_ATTR_MAX,
 };
 #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
@@ -71,6 +74,7 @@ enum thermal_genl_event {
 	THERMAL_GENL_EVENT_CDEV_DELETE,		/* Cdev unbound */
 	THERMAL_GENL_EVENT_CDEV_STATE_UPDATE,	/* Cdev state updated */
 	THERMAL_GENL_EVENT_TZ_GOV_CHANGE,	/* Governor policy changed  */
+	THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE,	/* CPU capability changed */
 	__THERMAL_GENL_EVENT_MAX,
 };
 #define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1)

tools/power/x86/intel-speed-select/Build

-intel-speed-select-y +=  isst-config.o isst-core.o isst-display.o
+intel-speed-select-y +=  isst-config.o isst-core.o isst-display.o isst-daemon.o hfi-events.o

tools/power/x86/intel-speed-select/Makefile

@@ -13,8 +13,8 @@ endif
 # Do not use make's built-in rules
 # (this improves performance and avoids hard-to-debug behaviour);
 MAKEFLAGS += -r
-
-override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
+override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include -I/usr/include/libnl3
+override LDFLAGS += -lnl-genl-3 -lnl-3
 
 ALL_TARGETS := intel-speed-select
 ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
@@ -31,7 +31,11 @@ $(OUTPUT)include/linux/isst_if.h: ../../../../include/uapi/linux/isst_if.h
 	mkdir -p $(OUTPUT)include/linux 2>&1 || true
 	ln -sf $(CURDIR)/../../../../include/uapi/linux/isst_if.h $@
 
-prepare: $(OUTPUT)include/linux/isst_if.h
+$(OUTPUT)include/linux/thermal.h: ../../../../include/uapi/linux/thermal.h
+	mkdir -p $(OUTPUT)include/linux 2>&1 || true
+	ln -sf $(CURDIR)/../../../../include/uapi/linux/thermal.h $@
+
+prepare: $(OUTPUT)include/linux/isst_if.h $(OUTPUT)include/linux/thermal.h
 
 ISST_IN := $(OUTPUT)intel-speed-select-in.o
 

tools/power/x86/intel-speed-select/hfi-events.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select -- Read HFI events for OOB
+ * Copyright (c) 2022 Intel Corporation.
+ */
+
+/*
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+
+ * WPA Supplicant - driver interaction with Linux nl80211/cfg80211
+ * Copyright (c) 2003-2008, Jouni Malinen <j@w1.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Alternatively, this software may be distributed under the terms of
+ * BSD license.
+ *
+ * Requires
+ * libnl-genl-3-dev
+ *
+ * For Fedora/CenOS
+ * dnf install libnl3-devel
+ * For Ubuntu
+ * apt install libnl-3-dev libnl-genl-3-dev
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/file.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/family.h>
+#include <netlink/genl/ctrl.h>
+
+#include <linux/thermal.h>
+#include "isst.h"
+
+struct hfi_event_data {
+	struct nl_sock *nl_handle;
+	struct nl_cb *nl_cb;
+};
+
+struct hfi_event_data drv;
+
+static int ack_handler(struct nl_msg *msg, void *arg)
+{
+	int *err = arg;
+	*err = 0;
+	return NL_STOP;
+}
+
+static int finish_handler(struct nl_msg *msg, void *arg)
+{
+	int *ret = arg;
+	*ret = 0;
+	return NL_SKIP;
+}
+
+static int error_handler(struct sockaddr_nl *nla, struct nlmsgerr *err,
+			 void *arg)
+{
+	int *ret = arg;
+	*ret = err->error;
+	return NL_SKIP;
+}
+
+static int seq_check_handler(struct nl_msg *msg, void *arg)
+{
+	return NL_OK;
+}
+
+static int send_and_recv_msgs(struct hfi_event_data *drv,
+			      struct nl_msg *msg,
+			      int (*valid_handler)(struct nl_msg *, void *),
+			      void *valid_data)
+{
+	struct nl_cb *cb;
+	int err = -ENOMEM;
+
+	cb = nl_cb_clone(drv->nl_cb);
+	if (!cb)
+		goto out;
+
+	err = nl_send_auto_complete(drv->nl_handle, msg);
+	if (err < 0)
+		goto out;
+
+	err = 1;
+
+	nl_cb_err(cb, NL_CB_CUSTOM, error_handler, &err);
+	nl_cb_set(cb, NL_CB_FINISH, NL_CB_CUSTOM, finish_handler, &err);
+	nl_cb_set(cb, NL_CB_ACK, NL_CB_CUSTOM, ack_handler, &err);
+
+	if (valid_handler)
+		nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM,
+			  valid_handler, valid_data);
+
+	while (err > 0)
+		nl_recvmsgs(drv->nl_handle, cb);
+ out:
+	nl_cb_put(cb);
+	nlmsg_free(msg);
+	return err;
+}
+
+struct family_data {
+	const char *group;
+	int id;
+};
+
+static int family_handler(struct nl_msg *msg, void *arg)
+{
+	struct family_data *res = arg;
+	struct nlattr *tb[CTRL_ATTR_MAX + 1];
+	struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
+	struct nlattr *mcgrp;
+	int i;
+
+	nla_parse(tb, CTRL_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
+		  genlmsg_attrlen(gnlh, 0), NULL);
+	if (!tb[CTRL_ATTR_MCAST_GROUPS])
+		return NL_SKIP;
+
+	nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], i) {
+		struct nlattr *tb2[CTRL_ATTR_MCAST_GRP_MAX + 1];
+		nla_parse(tb2, CTRL_ATTR_MCAST_GRP_MAX, nla_data(mcgrp),
+			  nla_len(mcgrp), NULL);
+		if (!tb2[CTRL_ATTR_MCAST_GRP_NAME] ||
+		    !tb2[CTRL_ATTR_MCAST_GRP_ID] ||
+		    strncmp(nla_data(tb2[CTRL_ATTR_MCAST_GRP_NAME]),
+				res->group,
+				nla_len(tb2[CTRL_ATTR_MCAST_GRP_NAME])) != 0)
+			continue;
+		res->id = nla_get_u32(tb2[CTRL_ATTR_MCAST_GRP_ID]);
+		break;
+	};
+
+	return 0;
+}
+
+static int nl_get_multicast_id(struct hfi_event_data *drv,
+			       const char *family, const char *group)
+{
+	struct nl_msg *msg;
+	int ret = -1;
+	struct family_data res = { group, -ENOENT };
+
+	msg = nlmsg_alloc();
+	if (!msg)
+		return -ENOMEM;
+	genlmsg_put(msg, 0, 0, genl_ctrl_resolve(drv->nl_handle, "nlctrl"),
+		    0, 0, CTRL_CMD_GETFAMILY, 0);
+	NLA_PUT_STRING(msg, CTRL_ATTR_FAMILY_NAME, family);
+
+	ret = send_and_recv_msgs(drv, msg, family_handler, &res);
+	msg = NULL;
+	if (ret == 0)
+		ret = res.id;
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return ret;
+}
+
+struct perf_cap {
+	int cpu;
+	int perf;
+	int eff;
+};
+
+static void process_hfi_event(struct perf_cap *perf_cap)
+{
+	process_level_change(perf_cap->cpu);
+}
+
+static int handle_event(struct nl_msg *n, void *arg)
+{
+	struct nlmsghdr *nlh = nlmsg_hdr(n);
+	struct genlmsghdr *genlhdr = genlmsg_hdr(nlh);
+	struct nlattr *attrs[THERMAL_GENL_ATTR_MAX + 1];
+	int ret;
+	struct perf_cap perf_cap;
+
+	ret = genlmsg_parse(nlh, 0, attrs, THERMAL_GENL_ATTR_MAX, NULL);
+
+	debug_printf("Received event %d parse_rer:%d\n", genlhdr->cmd, ret);
+	if (genlhdr->cmd == THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE) {
+		struct nlattr *cap;
+		int j, index = 0;
+
+		debug_printf("THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE\n");
+		nla_for_each_nested(cap, attrs[THERMAL_GENL_ATTR_CPU_CAPABILITY], j) {
+			switch (index) {
+			case 0:
+				perf_cap.cpu = nla_get_u32(cap);
+				break;
+			case 1:
+				perf_cap.perf = nla_get_u32(cap);
+				break;
+			case 2:
+				perf_cap.eff = nla_get_u32(cap);
+				break;
+			default:
+				break;
+			}
+			++index;
+			if (index == 3) {
+				index = 0;
+				process_hfi_event(&perf_cap);
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int _hfi_exit;
+
+static int check_hf_suport(void)
+{
+	unsigned int eax = 0, ebx = 0, ecx = 0, edx = 0;
+
+	__cpuid(6, eax, ebx, ecx, edx);
+	if (eax & BIT(19))
+		return 1;
+
+	return 0;
+}
+
+int hfi_main(void)
+{
+	struct nl_sock *sock;
+	struct nl_cb *cb;
+	int err = 0;
+	int mcast_id;
+	int no_block = 0;
+
+	if (!check_hf_suport()) {
+		fprintf(stderr, "CPU Doesn't support HFI\n");
+		return -1;
+	}
+
+	sock = nl_socket_alloc();
+	if (!sock) {
+		fprintf(stderr, "nl_socket_alloc failed\n");
+		return -1;
+	}
+
+	if (genl_connect(sock)) {
+		fprintf(stderr, "genl_connect(sk_event) failed\n");
+		goto free_sock;
+	}
+
+	drv.nl_handle = sock;
+	drv.nl_cb = cb = nl_cb_alloc(NL_CB_DEFAULT);
+	if (drv.nl_cb == NULL) {
+		printf("Failed to allocate netlink callbacks");
+		goto free_sock;
+	}
+
+	mcast_id = nl_get_multicast_id(&drv, THERMAL_GENL_FAMILY_NAME,
+				   THERMAL_GENL_EVENT_GROUP_NAME);
+	if (mcast_id < 0) {
+		fprintf(stderr, "nl_get_multicast_id failed\n");
+		goto free_sock;
+	}
+
+	if (nl_socket_add_membership(sock, mcast_id)) {
+		fprintf(stderr, "nl_socket_add_membership failed");
+		goto free_sock;
+	}
+
+	nl_cb_set(cb, NL_CB_SEQ_CHECK, NL_CB_CUSTOM, seq_check_handler, 0);
+	nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, handle_event, NULL);
+
+	if (no_block)
+		nl_socket_set_nonblocking(sock);
+
+	debug_printf("hfi is initialized\n");
+
+	while (!_hfi_exit && !err) {
+		err = nl_recvmsgs(sock, cb);
+		debug_printf("nl_recv_message err:%d\n", err);
+	}
+
+	return 0;
+
+	/* Netlink library doesn't have calls to dealloc cb or disconnect */
+free_sock:
+	nl_socket_free(sock);
+
+	return -1;
+}
+
+void hfi_exit(void)
+{
+	_hfi_exit = 1;
+}

tools/power/x86/intel-speed-select/isst-config.c

@@ -15,7 +15,8 @@ struct process_cmd_struct {
 	int arg;
 };
 
-static const char *version_str = "v1.11";
+static const char *version_str = "v1.12";
+
 static const int supported_api_ver = 1;
 static struct isst_if_platform_info isst_platform_info;
 static char *progname;
@@ -368,7 +369,7 @@ int get_topo_max_cpus(void)
 	return topo_max_cpus;
 }
 
-static void set_cpu_online_offline(int cpu, int state)
+void set_cpu_online_offline(int cpu, int state)
 {
 	char buffer[128];
 	int fd, ret;
@@ -409,12 +410,10 @@ static void force_all_cpus_online(void)
 	unlink("/var/run/isst_cpu_topology.dat");
 }
 
-#define MAX_PACKAGE_COUNT 8
-#define MAX_DIE_PER_PACKAGE 2
-static void for_each_online_package_in_set(void (*callback)(int, void *, void *,
-							    void *, void *),
-					   void *arg1, void *arg2, void *arg3,
-					   void *arg4)
+void for_each_online_package_in_set(void (*callback)(int, void *, void *,
+						     void *, void *),
+				    void *arg1, void *arg2, void *arg3,
+				    void *arg4)
 {
 	int max_packages[MAX_PACKAGE_COUNT * MAX_PACKAGE_COUNT];
 	int pkg_index = 0, i;
@@ -2803,7 +2802,9 @@ static void usage(void)
 	printf("\t[-p|--pause] : Delay between two mail box commands in milliseconds\n");
 	printf("\t[-r|--retry] : Retry count for mail box commands on failure, default 3\n");
 	printf("\t[-v|--version] : Print version\n");
-
+	printf("\t[-b|--oob : Start a daemon to process HFI events for perf profile change from Out of Band agent.\n");
+	printf("\t[-n|--no-daemon : Don't run as daemon. By default --oob will turn on daemon mode\n");
+	printf("\t[-w|--delay : Delay for reading config level state change in OOB poll mode.\n");
 	printf("\nResult format\n");
 	printf("\tResult display uses a common format for each command:\n");
 	printf("\tResults are formatted in text/JSON with\n");
@@ -2837,6 +2838,9 @@ static void cmdline(int argc, char **argv)
 	int opt, force_cpus_online = 0;
 	int option_index = 0;
 	int ret;
+	int oob_mode = 0;
+	int poll_interval = -1;
+	int no_daemon = 0;
 
 	static struct option long_options[] = {
 		{ "all-cpus-online", no_argument, 0, 'a' },
@@ -2849,6 +2853,9 @@ static void cmdline(int argc, char **argv)
 		{ "out", required_argument, 0, 'o' },
 		{ "retry", required_argument, 0, 'r' },
 		{ "version", no_argument, 0, 'v' },
+		{ "oob", no_argument, 0, 'b' },
+		{ "no-daemon", no_argument, 0, 'n' },
+		{ "poll-interval", required_argument, 0, 'w' },
 		{ 0, 0, 0, 0 }
 	};
 
@@ -2875,7 +2882,7 @@ static void cmdline(int argc, char **argv)
 	}
 
 	progname = argv[0];
-	while ((opt = getopt_long_only(argc, argv, "+c:df:hio:va", long_options,
+	while ((opt = getopt_long_only(argc, argv, "+c:df:hio:vabw:n", long_options,
 				       &option_index)) != -1) {
 		switch (opt) {
 		case 'a':
@@ -2920,12 +2927,26 @@ static void cmdline(int argc, char **argv)
 		case 'v':
 			print_version();
 			break;
+		case 'b':
+			oob_mode = 1;
+			break;
+		case 'n':
+			no_daemon = 1;
+			break;
+		case 'w':
+			ret = strtol(optarg, &ptr, 10);
+			if (!ret) {
+				fprintf(stderr, "Invalid poll interval count\n");
+				exit(0);
+			}
+			poll_interval = ret;
+			break;
 		default:
 			usage();
 		}
 	}
 
-	if (optind > (argc - 2)) {
+	if (optind > (argc - 2) && !oob_mode) {
 		usage();
 		exit(0);
 	}
@@ -2936,6 +2957,17 @@ static void cmdline(int argc, char **argv)
 	set_cpu_present_cpu_mask();
 	set_cpu_target_cpu_mask();
 
+	if (oob_mode) {
+		create_cpu_map();
+		if (debug_flag)
+			fprintf(stderr, "OOB mode is enabled in debug mode\n");
+
+		ret = isst_daemon(debug_flag, poll_interval, no_daemon);
+		if (ret)
+			fprintf(stderr, "OOB mode enable failed\n");
+		goto out;
+	}
+
 	if (!is_clx_n_platform()) {
 		ret = isst_fill_platform_info();
 		if (ret)

tools/power/x86/intel-speed-select/isst-daemon.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select -- Allow speed select to daemonize
+ * Copyright (c) 2022 Intel Corporation.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/file.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <time.h>
+
+#include "isst.h"
+
+static int per_package_levels_info[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE];
+static time_t per_package_levels_tm[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE];
+
+static void init_levels(void)
+{
+	int i, j;
+
+	for (i = 0; i < MAX_PACKAGE_COUNT; ++i)
+		for (j = 0; j < MAX_DIE_PER_PACKAGE; ++j)
+			per_package_levels_info[i][j] = -1;
+}
+
+void process_level_change(int cpu)
+{
+	struct isst_pkg_ctdp_level_info ctdp_level;
+	int pkg_id = get_physical_package_id(cpu);
+	int die_id = get_physical_die_id(cpu);
+	struct isst_pkg_ctdp pkg_dev;
+	time_t tm;
+	int ret;
+
+	if (pkg_id >= MAX_PACKAGE_COUNT || die_id > MAX_DIE_PER_PACKAGE) {
+		debug_printf("Invalid package/die info for cpu:%d\n", cpu);
+		return;
+	}
+
+	tm = time(NULL);
+	if (tm - per_package_levels_tm[pkg_id][die_id] < 2 )
+		return;
+
+	per_package_levels_tm[pkg_id][die_id] = tm;
+
+	ret = isst_get_ctdp_levels(cpu, &pkg_dev);
+	if (ret) {
+		debug_printf("Can't get tdp levels for cpu:%d\n", cpu);
+		return;
+	}
+
+	debug_printf("Get Config level %d pkg:%d die:%d current_level:%d \n", cpu,
+		      pkg_id, die_id, pkg_dev.current_level);
+
+	if (pkg_dev.locked) {
+		debug_printf("config TDP s locked \n");
+		return;
+	}
+
+	if (per_package_levels_info[pkg_id][die_id] == pkg_dev.current_level)
+		return;
+
+	debug_printf("**Config level change for cpu:%d pkg:%d die:%d from %d to %d\n",
+		      cpu, pkg_id, die_id, per_package_levels_info[pkg_id][die_id],
+		      pkg_dev.current_level);
+
+	per_package_levels_info[pkg_id][die_id] = pkg_dev.current_level;
+
+	ctdp_level.core_cpumask_size =
+		alloc_cpu_set(&ctdp_level.core_cpumask);
+	ret = isst_get_coremask_info(cpu, pkg_dev.current_level, &ctdp_level);
+	if (ret) {
+		free_cpu_set(ctdp_level.core_cpumask);
+		debug_printf("Can't get core_mask:%d\n", cpu);
+		return;
+	}
+
+	if (ctdp_level.cpu_count) {
+		int i, max_cpus = get_topo_max_cpus();
+		for (i = 0; i < max_cpus; ++i) {
+			if (pkg_id != get_physical_package_id(i) || die_id != get_physical_die_id(i))
+				continue;
+			if (CPU_ISSET_S(i, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask)) {
+				fprintf(stderr, "online cpu %d\n", i);
+				set_cpu_online_offline(i, 1);
+			} else {
+				fprintf(stderr, "offline cpu %d\n", i);
+				set_cpu_online_offline(i, 0);
+			}
+		}
+	}
+
+	free_cpu_set(ctdp_level.core_cpumask);
+}
+
+static void _poll_for_config_change(int cpu, void *arg1, void *arg2,
+				    void *arg3, void *arg4)
+{
+	process_level_change(cpu);
+}
+
+static void poll_for_config_change(void)
+{
+	for_each_online_package_in_set(_poll_for_config_change, NULL, NULL,
+				       NULL, NULL);
+}
+
+static int done = 0;
+static int pid_file_handle;
+
+static void signal_handler(int sig)
+{
+	switch (sig) {
+	case SIGINT:
+	case SIGTERM:
+		done = 1;
+		hfi_exit();
+		exit(0);
+		break;
+	default:
+		break;
+	}
+}
+
+static void daemonize(char *rundir, char *pidfile)
+{
+	int pid, sid, i;
+	char str[10];
+	struct sigaction sig_actions;
+	sigset_t sig_set;
+	int ret;
+
+	if (getppid() == 1)
+		return;
+
+	sigemptyset(&sig_set);
+	sigaddset(&sig_set, SIGCHLD);
+	sigaddset(&sig_set, SIGTSTP);
+	sigaddset(&sig_set, SIGTTOU);
+	sigaddset(&sig_set, SIGTTIN);
+	sigprocmask(SIG_BLOCK, &sig_set, NULL);
+
+	sig_actions.sa_handler = signal_handler;
+	sigemptyset(&sig_actions.sa_mask);
+	sig_actions.sa_flags = 0;
+
+	sigaction(SIGHUP, &sig_actions, NULL);
+	sigaction(SIGTERM, &sig_actions, NULL);
+	sigaction(SIGINT, &sig_actions, NULL);
+
+	pid = fork();
+	if (pid < 0) {
+		/* Could not fork */
+		exit(EXIT_FAILURE);
+	}
+	if (pid > 0)
+		exit(EXIT_SUCCESS);
+
+	umask(027);
+
+	sid = setsid();
+	if (sid < 0)
+		exit(EXIT_FAILURE);
+
+	/* close all descriptors */
+	for (i = getdtablesize(); i >= 0; --i)
+		close(i);
+
+	i = open("/dev/null", O_RDWR);
+	ret = dup(i);
+	if (ret == -1)
+		exit(EXIT_FAILURE);
+
+	ret = dup(i);
+	if (ret == -1)
+		exit(EXIT_FAILURE);
+
+	ret = chdir(rundir);
+	if (ret == -1)
+		exit(EXIT_FAILURE);
+
+	pid_file_handle = open(pidfile, O_RDWR | O_CREAT, 0600);
+	if (pid_file_handle == -1) {
+		/* Couldn't open lock file */
+		exit(1);
+	}
+	/* Try to lock file */
+#ifdef LOCKF_SUPPORT
+	if (lockf(pid_file_handle, F_TLOCK, 0) == -1) {
+#else
+	if (flock(pid_file_handle, LOCK_EX|LOCK_NB) < 0) {
+#endif
+		/* Couldn't get lock on lock file */
+		fprintf(stderr, "Couldn't get lock file %d\n", getpid());
+		exit(1);
+	}
+	snprintf(str, sizeof(str), "%d\n", getpid());
+	ret = write(pid_file_handle, str, strlen(str));
+	if (ret == -1)
+		exit(EXIT_FAILURE);
+
+	close(i);
+}
+
+int isst_daemon(int debug_mode, int poll_interval, int no_daemon)
+{
+	int ret;
+
+	if (!no_daemon && poll_interval < 0 && !debug_mode) {
+		fprintf(stderr, "OOB mode is enabled and will run as daemon\n");
+		daemonize((char *) "/tmp/",
+				(char *)"/tmp/hfi-events.pid");
+	} else {
+		signal(SIGINT, signal_handler);
+	}
+
+	init_levels();
+
+	if (poll_interval < 0) {
+		ret = hfi_main();
+		if (ret) {
+			fprintf(stderr, "HFI initialization failed\n");
+		}
+		fprintf(stderr, "Must specify poll-interval\n");
+		return ret;
+	}
+
+	debug_printf("Starting loop\n");
+	while (!done) {
+		sleep(poll_interval);
+		poll_for_config_change();
+	}
+
+	return 0;
+}

tools/power/x86/intel-speed-select/isst.h

@@ -76,6 +76,9 @@
 
 #define DISP_FREQ_MULTIPLIER 100
 
+#define MAX_PACKAGE_COUNT 8
+#define MAX_DIE_PER_PACKAGE 2
+
 struct isst_clos_config {
 	int pkg_id;
 	int die_id;
@@ -260,4 +263,14 @@ extern int is_skx_based_platform(void);
 extern int is_spr_platform(void);
 extern int is_icx_platform(void);
 extern void isst_trl_display_information(int cpu, FILE *outf, unsigned long long trl);
+
+extern void set_cpu_online_offline(int cpu, int state);
+extern void for_each_online_package_in_set(void (*callback)(int, void *, void *,
+							    void *, void *),
+					   void *arg1, void *arg2, void *arg3,
+					   void *arg4);
+extern int isst_daemon(int debug_mode, int poll_interval, int no_daemon);
+extern void process_level_change(int cpu);
+extern int hfi_main(void);
+extern void hfi_exit(void);
 #endif