arm64: dts: qcom: pms405: add unit name adc nodes

The adc nodes have reg property but were missing the unit name, so add
that to fix these warnings:

arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/pms405.dtsi

@@ -88,41 +88,41 @@ pms405_adc: adc@3100 {
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			ref_gnd {
+			ref_gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			vref_1p25 {
+			vref_1p25@1 {
 				reg = <ADC5_1P25VREF>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pon_1: vph_pwr {
+			pon_1: vph_pwr@131 {
 				reg = <ADC5_VPH_PWR>;
 				qcom,pre-scaling = <1 3>;
 			};
 
-			die_temp {
+			die_temp@6 {
 				reg = <ADC5_DIE_TEMP>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pa_therm1: thermistor1 {
+			pa_therm1: thermistor1@77 {
 				reg = <ADC5_AMUX_THM1_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pa_therm3: thermistor3 {
+			pa_therm3: thermistor3@79 {
 				reg = <ADC5_AMUX_THM3_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			xo_therm: xo_temp {
+			xo_therm: xo_temp@76 {
 				reg = <ADC5_XO_THERM_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;