Commit f673ceb1 authored by Kevin Cernekee's avatar Kevin Cernekee Committed by Dmitry Torokhov

Input: ALPS - rework detection of Pinnacle AGx touchpads

The official ALPS driver uses the EC report, not the E7 report, to detect
these devices.  Also, they check for a range of values; the original
table-based code only checked for two specific ones.
Signed-off-by: default avatarKevin Cernekee <cernekee@gmail.com>
Tested-by: default avatarDave Turvene <dturvene@dahetral.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 50e8b216
......@@ -109,8 +109,6 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
{ { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
{ { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
......@@ -1412,6 +1410,10 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
priv->mask0 = 0x8f;
priv->flags = ALPS_DUALPOINT;
switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
......@@ -1491,8 +1493,15 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
alps_exit_command_mode(psmouse))
return -EIO;
if (alps_match_table(psmouse, priv, e7, ec) == 0)
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
ec[2] >= 0x90 && ec[2] <= 0x9d) {
priv->proto_version = ALPS_PROTO_V3;
alps_set_defaults(priv);
return 0;
}
psmouse_info(psmouse,
"Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment