Commit f67e07eb authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k_hw: fix more bitfield related endian issues

A few LNA control related flags were also specified as a bitfields, however
for some strange reason they were written in big-endian order this time.
Fix this by using flags instead.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e702ba18
......@@ -236,6 +236,15 @@
#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
#define LNA_CTL_BUF_MODE BIT(0)
#define LNA_CTL_ISEL_LO BIT(1)
#define LNA_CTL_ISEL_HI BIT(2)
#define LNA_CTL_BUF_IN BIT(3)
#define LNA_CTL_FEM_BAND BIT(4)
#define LNA_CTL_LOCAL_BIAS BIT(5)
#define LNA_CTL_FORCE_XPA BIT(6)
#define LNA_CTL_USE_ANT1 BIT(7)
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
......@@ -381,10 +390,7 @@ struct modal_eep_header {
u8 xatten2Margin[AR5416_MAX_CHAINS];
u8 ob_ch1;
u8 db_ch1;
u8 useAnt1:1,
force_xpaon:1,
local_bias:1,
femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
u8 lna_ctl;
u8 miscBits;
u16 xpaBiasLvlFreq[3];
u8 futureModal[6];
......
......@@ -451,9 +451,10 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
AR_AN_TOP2_LOCALBIAS,
AR_AN_TOP2_LOCALBIAS_S,
pModal->local_bias);
!!(pModal->lna_ctl &
LNA_CTL_LOCAL_BIAS));
REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
pModal->force_xpaon);
!!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
}
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
......@@ -1428,9 +1429,9 @@ static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
num_ant_config = 1;
if (pBase->version >= 0x0E0D)
if (pModal->useAnt1)
num_ant_config += 1;
if (pBase->version >= 0x0E0D &&
(pModal->lna_ctl & LNA_CTL_USE_ANT1))
num_ant_config += 1;
return num_ant_config;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment