mtd: rawnand: gpmi: Introduce GPMI_IS_MXS() macro

Introduce a GPMI_IS_MXS() macro to take into account the cases
when mx23 or mx28 are used, which helps readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c

@@ -157,8 +157,7 @@ int gpmi_init(struct gpmi_nand_data *this)
 	 * Reset BCH here, too. We got failures otherwise :(
 	 * See later BCH reset for explanation of MX23 and MX28 handling
 	 */
-	ret = gpmi_reset_block(r->bch_regs,
-			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
 	if (ret)
 		goto err_out;
 
@@ -266,8 +265,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
 	* and MX28.
 	*/
-	ret = gpmi_reset_block(r->bch_regs,
-			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
 	if (ret)
 		goto err_out;
 

drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c

@@ -171,7 +171,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
 	struct bch_geometry *geo = &this->bch_geometry;
 
 	/* Do the sanity check. */
-	if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+	if (GPMI_IS_MXS(this)) {
 		/* The mx23/mx28 only support the GF13. */
 		if (geo->gf_len == 14)
 			return false;

drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h

@@ -207,4 +207,5 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
 				 GPMI_IS_MX7D(x))
+#define GPMI_IS_MXS(x)		(GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
 #endif