Commit f6aabe1f authored by Andrew Duggan's avatar Andrew Duggan Committed by Dmitry Torokhov

Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver

This patch fixes an issue seen on HID touchpads which report finger
positions using RMI4 Function 12. The issue manifests itself as
spurious button presses as described in:
https://www.spinics.net/lists/linux-input/msg58618.html

Commit 24d28e4f ("Input: synaptics-rmi4 - convert irq distribution
to irq_domain") switched the RMI4 driver to using an irq_domain to handle
RMI4 function interrupts. Functions with more then one interrupt now have
each interrupt mapped to their own IRQ and IRQ handler. The result of
this change is that the F12 IRQ handler was now getting called twice. Once
for the absolute data interrupt and once for the relative data interrupt.
For HID devices, calling rmi_f12_attention() a second time causes the
attn_data data pointer and size to be set incorrectly. When the touchpad
button is pressed, F30 will generate an interrupt and attempt to read the
F30 data from the invalid attn_data data pointer and report incorrect
button events.

This patch disables the F12 relative interrupt which prevents
rmi_f12_attention() from being called twice.
Signed-off-by: default avatarAndrew Duggan <aduggan@synaptics.com>
Reported-by: default avatarSimon Wood <simon@mungewell.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.comSigned-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 003f01c7
......@@ -55,6 +55,9 @@ struct f12_data {
const struct rmi_register_desc_item *data15;
u16 data15_offset;
unsigned long *abs_mask;
unsigned long *rel_mask;
};
static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
......@@ -291,9 +294,18 @@ static int rmi_f12_write_control_regs(struct rmi_function *fn)
static int rmi_f12_config(struct rmi_function *fn)
{
struct rmi_driver *drv = fn->rmi_dev->driver;
struct f12_data *f12 = dev_get_drvdata(&fn->dev);
struct rmi_2d_sensor *sensor;
int ret;
drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
sensor = &f12->sensor;
if (!sensor->report_abs)
drv->clear_irq_bits(fn->rmi_dev, f12->abs_mask);
else
drv->set_irq_bits(fn->rmi_dev, f12->abs_mask);
drv->clear_irq_bits(fn->rmi_dev, f12->rel_mask);
ret = rmi_f12_write_control_regs(fn);
if (ret)
......@@ -315,9 +327,12 @@ static int rmi_f12_probe(struct rmi_function *fn)
struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
u16 data_offset = 0;
int mask_size;
rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);
ret = rmi_read(fn->rmi_dev, query_addr, &buf);
if (ret < 0) {
dev_err(&fn->dev, "Failed to read general info register: %d\n",
......@@ -332,10 +347,19 @@ static int rmi_f12_probe(struct rmi_function *fn)
return -ENODEV;
}
f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data), GFP_KERNEL);
f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data) + mask_size * 2,
GFP_KERNEL);
if (!f12)
return -ENOMEM;
f12->abs_mask = (unsigned long *)((char *)f12
+ sizeof(struct f12_data));
f12->rel_mask = (unsigned long *)((char *)f12
+ sizeof(struct f12_data) + mask_size);
set_bit(fn->irq_pos, f12->abs_mask);
set_bit(fn->irq_pos + 1, f12->rel_mask);
f12->has_dribble = !!(buf & BIT(3));
if (fn->dev.of_node) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment