arm64: dts: rockchip: add rk3399 edp nodes

Add an edp node, and also add edp endpoints to vopb and vopl
output port nodes.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1467,6 +1467,12 @@ vopl: vop@ff8f0000 {
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
 		};
 	};
 
@@ -1497,6 +1503,12 @@ vopb: vop@ff900000 {
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
 		};
 	};
 
@@ -1512,6 +1524,41 @@ vopb_mmu: iommu@ff903f00 {
 		status = "disabled";
 	};
 
+	edp: edp@ff970000 {
+		compatible = "rockchip,rk3399-edp";
+		reg = <0x0 0xff970000 0x0 0x8000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+		power-domains = <&power RK3399_PD_EDP>;
+		resets = <&cru SRST_P_EDP_CTRL>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;