Merge tag 'amlogic-dt' of...

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: ec100: add the GPIO line names
  ARM: dts: meson8b: ec100: improve the description of the regulators
  ARM: dts: meson8b: ec100: enable the Ethernet PHY interrupt
  ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible
  ARM: dts: meson: switch the clock controller to the HHI register area
  ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
  ARM: dts: meson8b: add the Mali-450 MP2 GPU
  ARM: dts: meson8: add the Mali-450 MP6 GPU
  dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible
  ARM: dts: meson8b: add the APB bus
  ARM: dts: meson8: add the APB bus
  ARM: dts: meson6: add the APB2 bus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt

@@ -13,6 +13,8 @@ Required properties:
       + allwinner,sun8i-h3-mali
       + allwinner,sun50i-a64-mali
       + allwinner,sun50i-h5-mali
+      + amlogic,meson8-mali
+      + amlogic,meson8b-mali
       + amlogic,meson-gxbb-mali
       + amlogic,meson-gxl-mali
       + rockchip,rk3036-mali
@@ -82,6 +84,10 @@ to specify one more vendor-specific compatible, among:
     Required properties:
       * resets: phandle to the reset line for the GPU
 
+  - amlogic,meson8-mali and amlogic,meson8b-mali
+    Required properties:
+      * resets: phandle to the reset line for the GPU
+
   - Rockchip variants:
     Required properties:
       * resets: phandle to the reset line for the GPU

arch/arm/boot/dts/meson.dtsi

@@ -73,6 +73,13 @@ cbus: cbus@c1100000 {
 			#size-cells = <1>;
 			ranges = <0x0 0xc1100000 0x200000>;
 
+			hhi: system-controller@4000 {
+				compatible = "amlogic,meson-hhi-sysctrl",
+					     "simple-mfd",
+					     "syscon";
+				reg = <0x4000 0x400>;
+			};
+
 			assist: assist@7c00 {
 				compatible = "amlogic,meson-mx-assist", "syscon";
 				reg = <0x7c00 0x200>;

arch/arm/boot/dts/meson6.dtsi

@@ -70,6 +70,14 @@ cpu@201 {
 		};
 	};
 
+	apb2: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x40000>;
+	};
+
 	xtal: xtal-clk {
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;

arch/arm/boot/dts/meson8.dtsi

@@ -166,6 +166,32 @@ opp-1992000000 {
 		};
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-182150000 {
+			opp-hz = /bits/ 64 <182150000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -201,6 +227,46 @@ power-firmware@4f00000 {
 			no-map;
 		};
 	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			switch-delay = <0xffff>;
+		};
+	};
 }; /* end of / */
 
 &aobus {
@@ -261,13 +327,6 @@ mux {
 };
 
 &cbus {
-	clkc: clock-controller@4000 {
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x400>;
-	};
-
 	reset: reset-controller@4404 {
 		compatible = "amlogic,meson8b-reset";
 		reg = <0x4404 0x9c>;
@@ -390,6 +449,11 @@ &efuse {
 	compatible = "amlogic,meson8-efuse";
 	clocks = <&clkc CLKID_EFUSE>;
 	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
 };
 
 &ethmac {
@@ -402,6 +466,14 @@ &gpio_intc {
 	status = "okay";
 };
 
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+};
+
 &hwrng {
 	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
@@ -469,6 +541,9 @@ &saradc {
 	clocks = <&clkc CLKID_XTAL>,
 		<&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
 };
 
 &sdio {

arch/arm/boot/dts/meson8b-ec100.dts

@@ -65,6 +65,11 @@ gpio-poweroff {
 		timeout-ms = <20000>;
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -84,6 +89,9 @@ power {
 	};
 
 	usb_vbus: regulator-usb-vbus {
+		/*
+		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "USB_VBUS";
@@ -91,11 +99,20 @@ usb_vbus: regulator-usb-vbus {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
+		vin-supply = <&vcc_5v>;
+
+		/*
+		 * signal name from the schematics: USB_PWR_EN
+		 */
 		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	vcc_5v: regulator-vcc5v {
+		/*
+		 * supplied by the main power input which called PWR_5V_STB
+		 * in the schematics
+		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "VCC5V";
@@ -103,6 +120,9 @@ vcc_5v: regulator-vcc5v {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
+		/*
+		 * signal name from the schematics: 3V3_5V_EN
+		 */
 		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
 
 		regulator-boot-on;
@@ -110,12 +130,18 @@ vcc_5v: regulator-vcc5v {
 	};
 
 	vcck: regulator-vcck {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator.
+		 */
 		compatible = "pwm-regulator";
 
 		regulator-name = "VCCK";
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		vin-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -124,19 +150,66 @@ vcck: regulator-vcck {
 	};
 
 	vcc_1v8: regulator-vcc1v8 {
+		/*
+		 * ABLIC S-1339D18-M5001-GP
+		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
 	};
 
 	vcc_3v3: regulator-vcc3v3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * VDDIO_AO3.3V in the schematics.
+		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_ddr3: regulator-vcc-ddr3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * DDR3_1.5V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&vcc_5v>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_rtc: regulator-vcc-rtc {
+		/*
+		 * Global Mixed-mode Technology Inc. G918T12U-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		/*
+		 * When the board is powered then the input is VCC3V3,
+		 * otherwise power is taken from the coin cell battery.
+		 */
+		vin-supply = <&vcc_3v3>;
 	};
 };
 
@@ -165,6 +238,10 @@ mdio {
 		eth_phy0: ethernet-phy@0 {
 			/* IC Plus IP101A/G (0x02430c54) */
 			reg = <0>;
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -213,6 +290,56 @@ sd_card_slot: slot@1 {
 	};
 };
 
+&gpio_ao {
+	gpio-line-names = "Linux_TX", "Linux_RX",
+			  "SLP_S5_N", "USB2_OC_FLAG#",
+			  "HUB_RST", "USB_PWR_EN",
+			  "I2S_IN", "SLP_S1_N",
+			  "TCK", "TMS", "TDI", "TDO",
+			  "HDMI_CEC", "5640_IRQ",
+			  "MUTE", "S805_TEST#";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+			  /* Bank GPIOY */
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+			  "VDDEE_PWM 3V3_5V_EN",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+			  "RMII_TXD0", "AV_select_1", "AV_select_2",
+			  "MCU_Control_S",
+			  /* Bank CARD */
+			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+			  "CARD_EN_DET (CARD_DET)",
+			  /* Bank BOOT */
+			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  /* Bank DIF */
+			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+			  "RMII_MDIO";
+};
+
 &pwm_cd {
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>;

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -119,6 +119,11 @@ tf_io: gpio-regulator-tf_io {
 			  1800000 1>;
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
 	vcc_1v8: regulator-vcc-1v8 {
 		/*
 		 * RICHTEK RT9179 configured for a fixed output voltage of

arch/arm/boot/dts/meson8b.dtsi

@@ -158,6 +158,32 @@ opp-1536000000 {
 		};
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-364300000 {
+			opp-hz = /bits/ 64 <364300000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a5-pmu";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -178,6 +204,34 @@ hwrom@0 {
 			no-map;
 		};
 	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			switch-delay = <0xffff>;
+		};
+	};
 }; /* end of / */
 
 &aobus {
@@ -222,13 +276,6 @@ mux {
 };
 
 &cbus {
-	clkc: clock-controller@4000 {
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x400>;
-	};
-
 	reset: reset-controller@4404 {
 		compatible = "amlogic,meson8b-reset";
 		reg = <0x4404 0x9c>;
@@ -270,9 +317,7 @@ mux {
 				groups = "eth_tx_clk",
 					 "eth_tx_en",
 					 "eth_txd1_0",
-					 "eth_txd1_1",
 					 "eth_txd0_0",
-					 "eth_txd0_1",
 					 "eth_rx_clk",
 					 "eth_rx_dv",
 					 "eth_rxd1",
@@ -281,7 +326,9 @@ mux {
 					 "eth_mdc",
 					 "eth_ref_clk",
 					 "eth_txd2",
-					 "eth_txd3";
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
 				function = "ethernet";
 				bias-disable;
 			};
@@ -360,6 +407,11 @@ &efuse {
 	compatible = "amlogic,meson8b-efuse";
 	clocks = <&clkc CLKID_EFUSE>;
 	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
 };
 
 &ethmac {
@@ -383,6 +435,14 @@ &gpio_intc {
 	status = "okay";
 };
 
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+};
+
 &hwrng {
 	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
@@ -450,6 +510,9 @@ &saradc {
 	clocks = <&clkc CLKID_XTAL>,
 		<&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
 };
 
 &sdio {

arch/arm/boot/dts/meson8m2-mxiii-plus.dts

@@ -45,6 +45,11 @@ button-function {
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";

arch/arm/boot/dts/meson8m2.dtsi

@@ -50,6 +50,10 @@ mux {
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
 &wdt {
 	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
 };