Commit f8781a08 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] saa7134: fix indent issues

As reported by smatch:
	drivers/media/pci/saa7134/saa7134-cards.c:7197 saa7134_xc2028_callback() warn: inconsistent indenting
	drivers/media/pci/saa7134/saa7134-cards.c:7846 saa7134_board_init2() warn: inconsistent indenting
	drivers/media/pci/saa7134/saa7134-cards.c:7913 saa7134_board_init2() warn: inconsistent indenting

While here, fix a few CodingStyle issues on the affected code
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 2f9e682d
......@@ -7194,7 +7194,7 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev,
saa7134_set_gpio(dev, 20, 1);
break;
}
return 0;
return 0;
}
return -EINVAL;
}
......@@ -7842,7 +7842,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
break;
case 0x001d:
dev->tuner_type = TUNER_PHILIPS_FMD1216ME_MK3;
printk(KERN_INFO "%s Board has DVB-T\n", dev->name);
printk(KERN_INFO "%s Board has DVB-T\n",
dev->name);
break;
default:
printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t);
......@@ -7903,13 +7904,15 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_ASUSTeK_TVFM7135:
/* The card below is detected as card=53, but is different */
if (dev->autodetected && (dev->eedata[0x27] == 0x03)) {
dev->board = SAA7134_BOARD_ASUSTeK_P7131_ANALOG;
printk(KERN_INFO "%s: P7131 analog only, using "
"entry of %s\n",
dev->name, saa7134_boards[dev->board].name);
dev->board = SAA7134_BOARD_ASUSTeK_P7131_ANALOG;
printk(KERN_INFO
"%s: P7131 analog only, using entry of %s\n",
dev->name, saa7134_boards[dev->board].name);
/* IR init has already happened for other cards, so
* we have to catch up. */
/*
* IR init has already happened for other cards, so
* we have to catch up.
*/
dev->has_remote = SAA7134_REMOTE_GPIO;
saa7134_input_init1(dev);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment