IB/mlx4: Saturate RoCE port PMA counters in case of overflow

commit 61a3855b upstream.

For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of
overflow, according to the IB spec, we have to saturate a counter to its
max value, do that.

Fixes: c3779134 ('IB/mlx4: Support PMA counters for IBoE')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[lizf: Backported to 3.4:
 - adjust context
 - open-code U32_MAX]
Signed-off-by: Zefan Li <lizefan@huawei.com>

drivers/infiniband/hw/mlx4/mad.c

@@ -44,6 +44,14 @@ enum {
 	MLX4_IB_VENDOR_CLASS2 = 0xa
 };
 
+/* Counters should be saturate once they reach their maximum value */
+#define ASSIGN_32BIT_COUNTER(counter, value) do {\
+	if ((value) > (u32)~0U)			 \
+		counter = cpu_to_be32((u32)~0U); \
+	else					 \
+		counter = cpu_to_be32(value);	 \
+} while (0)
+
 int mlx4_MAD_IFC(struct mlx4_ib_dev *dev, int ignore_mkey, int ignore_bkey,
 		 int port, struct ib_wc *in_wc, struct ib_grh *in_grh,
 		 void *in_mad, void *response_mad)
@@ -304,10 +312,14 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
 static void edit_counter(struct mlx4_counter *cnt,
 					struct ib_pma_portcounters *pma_cnt)
 {
-	pma_cnt->port_xmit_data = cpu_to_be32((be64_to_cpu(cnt->tx_bytes)>>2));
-	pma_cnt->port_rcv_data  = cpu_to_be32((be64_to_cpu(cnt->rx_bytes)>>2));
-	pma_cnt->port_xmit_packets = cpu_to_be32(be64_to_cpu(cnt->tx_frames));
-	pma_cnt->port_rcv_packets  = cpu_to_be32(be64_to_cpu(cnt->rx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_data,
+			     (be64_to_cpu(cnt->tx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_data,
+			     (be64_to_cpu(cnt->rx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_packets,
+			     be64_to_cpu(cnt->tx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_packets,
+			     be64_to_cpu(cnt->rx_frames));
 }
 
 static int iboe_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,