Commit f89f4490 authored by Krzysztof Hałasa's avatar Krzysztof Hałasa

IXP4xx: move Coyote platform macros to the platform code.

Signed-off-by: default avatarKrzysztof Hałasa <khc@pm.waw.pl>
parent ec669696
......@@ -18,13 +18,21 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#define COYOTE_PCI_SLOT0_DEVID 14
#define COYOTE_PCI_SLOT1_DEVID 15
/* PCI controller GPIO to IRQ pin mappings */
#define COYOTE_PCI_SLOT0_PIN 6
#define COYOTE_PCI_SLOT1_PIN 11
#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6
#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
void __init coyote_pci_preinit(void)
{
set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
......
......@@ -25,6 +25,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
#define COYOTE_IDE_REGION_SIZE 0x1000
#define COYOTE_IDE_DATA_PORT 0xFFFE10E0
#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC
#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2
#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
static struct flash_platform_data coyote_flash_data = {
.map_name = "cfi_probe",
.width = 2,
......
/*
* arch/arm/mach-ixp4xx/include/mach/coyote.h
*
* ADI Engineering platform specific definitions
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2004 (c) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H__
#error "Do not include this directly, instead #include <mach/hardware.h>"
#endif
/* PCI controller GPIO to IRQ pin mappings */
#define COYOTE_PCI_SLOT0_PIN 6
#define COYOTE_PCI_SLOT1_PIN 11
#define COYOTE_PCI_SLOT0_DEVID 14
#define COYOTE_PCI_SLOT1_DEVID 15
#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
#define COYOTE_IDE_REGION_SIZE 0x1000
#define COYOTE_IDE_DATA_PORT 0xFFFE10E0
#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC
#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2
......@@ -44,7 +44,6 @@
#include "platform.h"
/* Platform specific details */
#include "coyote.h"
#include "prpmc1100.h"
#include "nslu2.h"
#include "nas100d.h"
......
......@@ -78,13 +78,6 @@
#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8
/*
* ADI Coyote Board IRQs
*/
#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6
#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
/*
* NSLU2 board IRQs
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment