ARM: dts: rockchip: Add missing cooling device properties for CPUs on rk3288

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[follow conversion to operating-points-v2]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk3288.dtsi

@@ -70,18 +70,30 @@ cpu1: cpu@501 {
 			compatible = "arm,cortex-a12";
 			reg = <0x501>;
 			resets = <&cru SRST_CORE1>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu2: cpu@502 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x502>;
 			resets = <&cru SRST_CORE2>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu3: cpu@503 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x503>;
 			resets = <&cru SRST_CORE3>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 	};