ethernet/neterion: fix repeated words in comments

Delete the redundant word 'the'.
Delete the redundant word 'a'.
Delete the redundant word 'frame'.
Delete the redundant word 'is'.
Delete the redundant word 'not'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/neterion/s2io.c

@@ -2156,7 +2156,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
 
 	/*
 	 * In PCI 33 mode, the P_PLL is not used, and therefore,
-	 * the the P_PLL_LOCK bit in the adapter_status register will
+	 * the P_PLL_LOCK bit in the adapter_status register will
 	 * not be asserted.
 	 */
 	if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
@@ -3817,7 +3817,7 @@ static irqreturn_t s2io_test_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Test interrupt path by forcing a a software IRQ */
+/* Test interrupt path by forcing a software IRQ */
 static int s2io_test_msi(struct s2io_nic *sp)
 {
 	struct pci_dev *pdev = sp->pdev;
@@ -5492,7 +5492,7 @@ s2io_ethtool_gringparam(struct net_device *dev,
 }
 
 /**
- * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
+ * s2io_ethtool_getpause_data -Pause frame generation and reception.
  * @dev: pointer to netdev
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
@@ -7449,7 +7449,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
  *  @link : inidicates whether link is UP/DOWN.
  *  Description:
  *  This function stops/starts the Tx queue depending on whether the link
- *  status of the NIC is is down or up. This is called by the Alarm
+ *  status of the NIC is down or up. This is called by the Alarm
  *  interrupt handler whenever a link change interrupt comes up.
  *  Return value:
  *  void.
@@ -7732,7 +7732,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	 * Setting the device configuration parameters.
 	 * Most of these parameters can be specified by the user during
 	 * module insertion as they are module loadable parameters. If
-	 * these parameters are not not specified during load time, they
+	 * these parameters are not specified during load time, they
 	 * are initialized with default values.
 	 */
 	config = &sp->config;