Skip to content

L
linux
Commit fa2af6e4 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile 

Pull tile updates from Chris Metcalf:
 "These changes cover a range of new arch/tile features and
  optimizations.  They've been through LKML review and on linux-next for
  a month or so.  There's also one bug-fix that just missed 3.4, which
  I've marked for stable."

Fixed up trivial conflict in arch/tile/Kconfig (new added tile Kconfig
entries clashing with the generic timer/clockevents changes).

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: default to tilegx_defconfig for ARCH=tile
  tile: fix bug where fls(0) was not returning 0
  arch/tile: mark TILEGX as not EXPERIMENTAL
  tile/mm/fault.c: Port OOM changes to handle_page_fault
  arch/tile: add descriptive text if the kernel reports a bad trap
  arch/tile: allow querying cpu module information from the hypervisor
  arch/tile: fix hardwall for tilegx and generalize for idn and ipi
  arch/tile: support multiple huge page sizes dynamically
  mm: add new arch_make_huge_pte() method for tile support
  arch/tile: support kexec() for tilegx
  arch/tile: support <asm/cachectl.h> header for cacheflush() syscall
  arch/tile: Allow tilegx to build with either 16K or 64K page size
  arch/tile: optimize get_user/put_user and friends
  arch/tile: support building big-endian kernel
  arch/tile: allow building Linux with transparent huge pages enabled
  arch/tile: use interrupt critical sections less
parents 109b9b04 1fcb78e9
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2471 additions and 1169 deletions
arch/tile/Kconfig
View file @ fa2af6e4
......@@ -48,6 +48,14 @@ config NEED_PER_CPU_PAGE_FIRST_CHUNK
config SYS_SUPPORTS_HUGETLBFS
def_bool y
# Support for additional huge page sizes besides HPAGE_SIZE.
# The software support is currently only present in the TILE-Gx
# hypervisor. TILEPro in any case does not support page sizes
# larger than the default HPAGE_SIZE.
config HUGETLB_SUPER_PAGES
depends on HUGETLB_PAGE && TILEGX
def_bool y
# FIXME: tilegx can implement a more efficient rwsem.
config RWSEM_GENERIC_SPINLOCK
def_bool y
......@@ -107,16 +115,14 @@ config HVC_TILE
select HVC_DRIVER
def_bool y
# Please note: TILE-Gx support is not yet finalized; this is
# the preliminary support. TILE-Gx drivers are only provided
# with the alpha or beta test versions for Tilera customers.
config TILEGX
depends on EXPERIMENTAL
bool "Building with TILE-Gx (64-bit) compiler and toolchain"
config TILEPRO
def_bool !TILEGX
config 64BIT
depends on TILEGX
def_bool y
def_bool TILEGX
config ARCH_DEFCONFIG
string
......@@ -137,6 +143,31 @@ config NR_CPUS
smaller kernel memory footprint results from using a smaller
value on chips with fewer tiles.
if TILEGX
choice
prompt "Kernel page size"
default PAGE_SIZE_64KB
help
This lets you select the page size of the kernel. For best
performance on memory-intensive applications, a page size of 64KB
is recommended. For workloads involving many small files, many
connections, etc., it may be better to select 16KB, which uses
memory more efficiently at some cost in TLB performance.
Note that this option is TILE-Gx specific; currently
TILEPro page size is set by rebuilding the hypervisor.
config PAGE_SIZE_16KB
bool "16KB"
config PAGE_SIZE_64KB
bool "64KB"
endchoice
endif
source "kernel/Kconfig.hz"
config KEXEC
......
arch/tile/Makefile
View file @ fa2af6e4
......@@ -34,7 +34,12 @@ LIBGCC_PATH := \
$(shell $(CC) $(KBUILD_CFLAGS) $(KCFLAGS) -print-libgcc-file-name)
# Provide the path to use for "make defconfig".
KBUILD_DEFCONFIG := $(ARCH)_defconfig
# We default to the newer TILE-Gx architecture if only "tile" is given.
ifeq ($(ARCH),tile)
KBUILD_DEFCONFIG := tilegx_defconfig
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
# Used as a file extension when useful, e.g. head_$(BITS).o
# Not needed for (e.g.) "$(CC) -m32" since the compiler automatically
......
arch/tile/include/arch/spr_def_32.h
View file @ fa2af6e4
......@@ -65,6 +65,31 @@
#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x4e09
#define SPR_IDN_AVAIL_EN 0x3e05
#define SPR_IDN_CA_DATA 0x0b00
#define SPR_IDN_DATA_AVAIL 0x0b03
#define SPR_IDN_DEADLOCK_TIMEOUT 0x3406
#define SPR_IDN_DEMUX_CA_COUNT 0x0a05
#define SPR_IDN_DEMUX_COUNT_0 0x0a06
#define SPR_IDN_DEMUX_COUNT_1 0x0a07
#define SPR_IDN_DEMUX_CTL 0x0a08
#define SPR_IDN_DEMUX_QUEUE_SEL 0x0a0a
#define SPR_IDN_DEMUX_STATUS 0x0a0b
#define SPR_IDN_DEMUX_WRITE_FIFO 0x0a0c
#define SPR_IDN_DIRECTION_PROTECT 0x2e05
#define SPR_IDN_PENDING 0x0a0e
#define SPR_IDN_REFILL_EN 0x0e05
#define SPR_IDN_SP_FIFO_DATA 0x0a0f
#define SPR_IDN_SP_FIFO_SEL 0x0a10
#define SPR_IDN_SP_FREEZE 0x0a11
#define SPR_IDN_SP_FREEZE__SP_FRZ_MASK 0x1
#define SPR_IDN_SP_FREEZE__DEMUX_FRZ_MASK 0x2
#define SPR_IDN_SP_FREEZE__NON_DEST_EXT_MASK 0x4
#define SPR_IDN_SP_STATE 0x0a12
#define SPR_IDN_TAG_0 0x0a13
#define SPR_IDN_TAG_1 0x0a14
#define SPR_IDN_TAG_VALID 0x0a15
#define SPR_IDN_TILE_COORD 0x0a16
#define SPR_INTCTRL_0_STATUS 0x4a07
#define SPR_INTCTRL_1_STATUS 0x4807
#define SPR_INTCTRL_2_STATUS 0x4607
......@@ -87,12 +112,36 @@
#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
#define SPR_INTERRUPT_MASK_SET_2_0 0x460c
#define SPR_INTERRUPT_MASK_SET_2_1 0x460d
#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x6000
#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x6001
#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x6002
#define SPR_MPL_DMA_CPL_SET_0 0x5800
#define SPR_MPL_DMA_CPL_SET_1 0x5801
#define SPR_MPL_DMA_CPL_SET_2 0x5802
#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802
#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00
#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01
#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02
#define SPR_MPL_IDN_AVAIL_SET_0 0x3e00
#define SPR_MPL_IDN_AVAIL_SET_1 0x3e01
#define SPR_MPL_IDN_AVAIL_SET_2 0x3e02
#define SPR_MPL_IDN_CA_SET_0 0x3a00
#define SPR_MPL_IDN_CA_SET_1 0x3a01
#define SPR_MPL_IDN_CA_SET_2 0x3a02
#define SPR_MPL_IDN_COMPLETE_SET_0 0x1200
#define SPR_MPL_IDN_COMPLETE_SET_1 0x1201
#define SPR_MPL_IDN_COMPLETE_SET_2 0x1202
#define SPR_MPL_IDN_FIREWALL_SET_0 0x2e00
#define SPR_MPL_IDN_FIREWALL_SET_1 0x2e01
#define SPR_MPL_IDN_FIREWALL_SET_2 0x2e02
#define SPR_MPL_IDN_REFILL_SET_0 0x0e00
#define SPR_MPL_IDN_REFILL_SET_1 0x0e01
#define SPR_MPL_IDN_REFILL_SET_2 0x0e02
#define SPR_MPL_IDN_TIMER_SET_0 0x3400
#define SPR_MPL_IDN_TIMER_SET_1 0x3401
#define SPR_MPL_IDN_TIMER_SET_2 0x3402
#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
#define SPR_MPL_INTCTRL_0_SET_2 0x4a02
......@@ -102,6 +151,9 @@
#define SPR_MPL_INTCTRL_2_SET_0 0x4600
#define SPR_MPL_INTCTRL_2_SET_1 0x4601
#define SPR_MPL_INTCTRL_2_SET_2 0x4602
#define SPR_MPL_PERF_COUNT_SET_0 0x4200
#define SPR_MPL_PERF_COUNT_SET_1 0x4201
#define SPR_MPL_PERF_COUNT_SET_2 0x4202
#define SPR_MPL_SN_ACCESS_SET_0 0x0800
#define SPR_MPL_SN_ACCESS_SET_1 0x0801
#define SPR_MPL_SN_ACCESS_SET_2 0x0802
......@@ -181,6 +233,7 @@
#define SPR_UDN_DEMUX_STATUS 0x0c0d
#define SPR_UDN_DEMUX_WRITE_FIFO 0x0c0e
#define SPR_UDN_DIRECTION_PROTECT 0x3005
#define SPR_UDN_PENDING 0x0c10
#define SPR_UDN_REFILL_EN 0x1005
#define SPR_UDN_SP_FIFO_DATA 0x0c11
#define SPR_UDN_SP_FIFO_SEL 0x0c12
......@@ -195,6 +248,9 @@
#define SPR_UDN_TAG_3 0x0c18
#define SPR_UDN_TAG_VALID 0x0c19
#define SPR_UDN_TILE_COORD 0x0c1a
#define SPR_WATCH_CTL 0x4209
#define SPR_WATCH_MASK 0x420a
#define SPR_WATCH_VAL 0x420b
#endif /* !defined(__ARCH_SPR_DEF_H__) */
......
arch/tile/include/arch/spr_def_64.h
View file @ fa2af6e4
......@@ -52,6 +52,13 @@
#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x2707
#define SPR_IDN_AVAIL_EN 0x1a05
#define SPR_IDN_DATA_AVAIL 0x0a80
#define SPR_IDN_DEADLOCK_TIMEOUT 0x1806
#define SPR_IDN_DEMUX_COUNT_0 0x0a05
#define SPR_IDN_DEMUX_COUNT_1 0x0a06
#define SPR_IDN_DIRECTION_PROTECT 0x1405
#define SPR_IDN_PENDING 0x0a08
#define SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK 0x1
#define SPR_INTCTRL_0_STATUS 0x2505
#define SPR_INTCTRL_1_STATUS 0x2405
......@@ -88,9 +95,27 @@
#define SPR_IPI_MASK_SET_0 0x1f0a
#define SPR_IPI_MASK_SET_1 0x1e0a
#define SPR_IPI_MASK_SET_2 0x1d0a
#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x2100
#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x2101
#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x2102
#define SPR_MPL_AUX_TILE_TIMER_SET_0 0x1700
#define SPR_MPL_AUX_TILE_TIMER_SET_1 0x1701
#define SPR_MPL_AUX_TILE_TIMER_SET_2 0x1702
#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00
#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01
#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02
#define SPR_MPL_IDN_AVAIL_SET_0 0x1a00
#define SPR_MPL_IDN_AVAIL_SET_1 0x1a01
#define SPR_MPL_IDN_AVAIL_SET_2 0x1a02
#define SPR_MPL_IDN_COMPLETE_SET_0 0x0500
#define SPR_MPL_IDN_COMPLETE_SET_1 0x0501
#define SPR_MPL_IDN_COMPLETE_SET_2 0x0502
#define SPR_MPL_IDN_FIREWALL_SET_0 0x1400
#define SPR_MPL_IDN_FIREWALL_SET_1 0x1401
#define SPR_MPL_IDN_FIREWALL_SET_2 0x1402
#define SPR_MPL_IDN_TIMER_SET_0 0x1800
#define SPR_MPL_IDN_TIMER_SET_1 0x1801
#define SPR_MPL_IDN_TIMER_SET_2 0x1802
#define SPR_MPL_INTCTRL_0_SET_0 0x2500
#define SPR_MPL_INTCTRL_0_SET_1 0x2501
#define SPR_MPL_INTCTRL_0_SET_2 0x2502
......@@ -100,6 +125,21 @@
#define SPR_MPL_INTCTRL_2_SET_0 0x2300
#define SPR_MPL_INTCTRL_2_SET_1 0x2301
#define SPR_MPL_INTCTRL_2_SET_2 0x2302
#define SPR_MPL_IPI_0 0x1f04
#define SPR_MPL_IPI_0_SET_0 0x1f00
#define SPR_MPL_IPI_0_SET_1 0x1f01
#define SPR_MPL_IPI_0_SET_2 0x1f02
#define SPR_MPL_IPI_1 0x1e04
#define SPR_MPL_IPI_1_SET_0 0x1e00
#define SPR_MPL_IPI_1_SET_1 0x1e01
#define SPR_MPL_IPI_1_SET_2 0x1e02
#define SPR_MPL_IPI_2 0x1d04
#define SPR_MPL_IPI_2_SET_0 0x1d00
#define SPR_MPL_IPI_2_SET_1 0x1d01
#define SPR_MPL_IPI_2_SET_2 0x1d02
#define SPR_MPL_PERF_COUNT_SET_0 0x2000
#define SPR_MPL_PERF_COUNT_SET_1 0x2001
#define SPR_MPL_PERF_COUNT_SET_2 0x2002
#define SPR_MPL_UDN_ACCESS_SET_0 0x0b00
#define SPR_MPL_UDN_ACCESS_SET_1 0x0b01
#define SPR_MPL_UDN_ACCESS_SET_2 0x0b02
......@@ -167,6 +207,9 @@
#define SPR_UDN_DEMUX_COUNT_2 0x0b07
#define SPR_UDN_DEMUX_COUNT_3 0x0b08
#define SPR_UDN_DIRECTION_PROTECT 0x1505
#define SPR_UDN_PENDING 0x0b0a
#define SPR_WATCH_MASK 0x200a
#define SPR_WATCH_VAL 0x200b
#endif /* !defined(__ARCH_SPR_DEF_H__) */
......
arch/tile/include/asm/Kbuild
View file @ fa2af6e4
......@@ -2,6 +2,7 @@ include include/asm-generic/Kbuild.asm
header-y += ../arch/
header-y += cachectl.h
header-y += ucontext.h
header-y += hardwall.h
......@@ -21,7 +22,6 @@ generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += local.h
generic-y += module.h
generic-y += msgbuf.h
generic-y += mutex.h
generic-y += param.h
......
arch/tile/include/asm/atomic_32.h
View file @ fa2af6e4
......@@ -303,7 +303,14 @@ void __init_atomic_per_cpu(void);
void __atomic_fault_unlock(int *lock_ptr);
#endif
/* Return a pointer to the lock for the given address. */
int *__atomic_hashed_lock(volatile void *v);
/* Private helper routines in lib/atomic_asm_32.S */
struct __get_user {
unsigned long val;
int err;
};
extern struct __get_user __atomic_cmpxchg(volatile int *p,
int *lock, int o, int n);
extern struct __get_user __atomic_xchg(volatile int *p, int *lock, int n);
......@@ -319,6 +326,9 @@ extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n);
extern u64 __atomic64_xchg_add_unless(volatile u64 *p,
int *lock, u64 o, u64 n);
/* Return failure from the atomic wrappers. */
struct __get_user __atomic_bad_address(int __user *addr);
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_TILE_ATOMIC_32_H */
arch/tile/include/asm/bitops.h
View file @ fa2af6e4
......@@ -77,6 +77,11 @@ static inline int ffs(int x)
return __builtin_ffs(x);
}
static inline int fls64(__u64 w)
{
return (sizeof(__u64) * 8) - __builtin_clzll(w);
}
/**
* fls - find last set bit in word
* @x: the word to search
......@@ -90,12 +95,7 @@ static inline int ffs(int x)
*/
static inline int fls(int x)
{
return (sizeof(int) * 8) - __builtin_clz(x);
}
static inline int fls64(__u64 w)
{
return (sizeof(__u64) * 8) - __builtin_clzll(w);
return fls64((unsigned int) x);
}
static inline unsigned int __arch_hweight32(unsigned int w)
......
arch/tile/include/asm/byteorder.h
View file @ fa2af6e4
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#if defined (__BIG_ENDIAN__)
#include <linux/byteorder/big_endian.h>
#elif defined (__LITTLE_ENDIAN__)
#include <linux/byteorder/little_endian.h>
#else
#error "__BIG_ENDIAN__ or __LITTLE_ENDIAN__ must be defined."
#endif
arch/tile/include/asm/cachectl.h 0 → 100644
View file @ fa2af6e4
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#ifndef _ASM_TILE_CACHECTL_H
#define _ASM_TILE_CACHECTL_H
/*
* Options for cacheflush system call.
*
* The ICACHE flush is performed on all cores currently running the
* current process's address space. The intent is for user
* applications to be able to modify code, invoke the system call,
* then allow arbitrary other threads in the same address space to see
* the newly-modified code. Passing a length of CHIP_L1I_CACHE_SIZE()
* or more invalidates the entire icache on all cores in the address
* spaces. (Note: currently this option invalidates the entire icache
* regardless of the requested address and length, but we may choose
* to honor the arguments at some point.)
*
* Flush and invalidation of memory can normally be performed with the
* __insn_flush(), __insn_inv(), and __insn_finv() instructions from
* userspace. The DCACHE option to the system call allows userspace
* to flush the entire L1+L2 data cache from the core. In this case,
* the address and length arguments are not used. The DCACHE flush is
* restricted to the current core, not all cores in the address space.
*/
#define ICACHE (1<<0) /* invalidate L1 instruction cache */
#define DCACHE (1<<1) /* flush and invalidate data cache */
#define BCACHE (ICACHE|DCACHE) /* flush both caches */
#endif /* _ASM_TILE_CACHECTL_H */
arch/tile/include/asm/compat.h
View file @ fa2af6e4
......@@ -242,9 +242,6 @@ long compat_sys_fallocate(int fd, int mode,
long compat_sys_sched_rr_get_interval(compat_pid_t pid,
struct compat_timespec __user *interval);
/* Tilera Linux syscalls that don't have "compat" versions. */
#define compat_sys_flush_cache sys_flush_cache
/* These are the intvec_64.S trampolines. */
long _compat_sys_execve(const char __user *path,
const compat_uptr_t __user *argv,
......
arch/tile/include/asm/elf.h
View file @ fa2af6e4
......@@ -44,7 +44,11 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#else
#define ELF_CLASS ELFCLASS32
#endif
#ifdef __BIG_ENDIAN__
#define ELF_DATA ELFDATA2MSB
#else
#define ELF_DATA ELFDATA2LSB
#endif
/*
* There seems to be a bug in how compat_binfmt_elf.c works: it
......@@ -59,6 +63,7 @@ enum { ELF_ARCH = CHIP_ELF_TYPE() };
*/
#define elf_check_arch(x) \
((x)->e_ident[EI_CLASS] == ELF_CLASS && \
(x)->e_ident[EI_DATA] == ELF_DATA && \
(x)->e_machine == CHIP_ELF_TYPE())
/* The module loader only handles a few relocation types. */
......
arch/tile/include/asm/futex.h
View file @ fa2af6e4
......@@ -28,29 +28,81 @@
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <linux/errno.h>
#include <asm/atomic.h>
extern struct __get_user futex_set(u32 __user *v, int i);
extern struct __get_user futex_add(u32 __user *v, int n);
extern struct __get_user futex_or(u32 __user *v, int n);
extern struct __get_user futex_andn(u32 __user *v, int n);
extern struct __get_user futex_cmpxchg(u32 __user *v, int o, int n);
/*
* Support macros for futex operations. Do not use these macros directly.
* They assume "ret", "val", "oparg", and "uaddr" in the lexical context.
* __futex_cmpxchg() additionally assumes "oldval".
*/
#ifdef __tilegx__
#define __futex_asm(OP) \
asm("1: {" #OP " %1, %3, %4; movei %0, 0 }\n" \
".pushsection .fixup,\"ax\"\n" \
"0: { movei %0, %5; j 9f }\n" \
".section __ex_table,\"a\"\n" \
".quad 1b, 0b\n" \
".popsection\n" \
"9:" \
: "=r" (ret), "=r" (val), "+m" (*(uaddr)) \
: "r" (uaddr), "r" (oparg), "i" (-EFAULT))
#define __futex_set() __futex_asm(exch4)
#define __futex_add() __futex_asm(fetchadd4)
#define __futex_or() __futex_asm(fetchor4)
#define __futex_andn() ({ oparg = ~oparg; __futex_asm(fetchand4); })
#define __futex_cmpxchg() \
({ __insn_mtspr(SPR_CMPEXCH_VALUE, oldval); __futex_asm(cmpexch4); })
#define __futex_xor() \
({ \
u32 oldval, n = oparg; \
if ((ret = __get_user(oldval, uaddr)) == 0) { \
do { \
oparg = oldval ^ n; \
__futex_cmpxchg(); \
} while (ret == 0 && oldval != val); \
} \
})
/* No need to prefetch, since the atomic ops go to the home cache anyway. */
#define __futex_prolog()
#ifndef __tilegx__
extern struct __get_user futex_xor(u32 __user *v, int n);
#else
static inline struct __get_user futex_xor(u32 __user *uaddr, int n)
{
struct __get_user asm_ret = __get_user_4(uaddr);
if (!asm_ret.err) {
int oldval, newval;
do {
oldval = asm_ret.val;
newval = oldval ^ n;
asm_ret = futex_cmpxchg(uaddr, oldval, newval);
} while (asm_ret.err == 0 && oldval != asm_ret.val);
#define __futex_call(FN) \
{ \
struct __get_user gu = FN((u32 __force *)uaddr, lock, oparg); \
val = gu.val; \
ret = gu.err; \
}
return asm_ret;
}
#define __futex_set() __futex_call(__atomic_xchg)
#define __futex_add() __futex_call(__atomic_xchg_add)
#define __futex_or() __futex_call(__atomic_or)
#define __futex_andn() __futex_call(__atomic_andn)
#define __futex_xor() __futex_call(__atomic_xor)
#define __futex_cmpxchg() \
{ \
struct __get_user gu = __atomic_cmpxchg((u32 __force *)uaddr, \
lock, oldval, oparg); \
val = gu.val; \
ret = gu.err; \
}
/*
* Find the lock pointer for the atomic calls to use, and issue a
* prefetch to the user address to bring it into cache. Similar to
* __atomic_setup(), but we can't do a read into the L1 since it might
* fault; instead we do a prefetch into the L2.
*/
#define __futex_prolog() \
int *lock; \
__insn_prefetch(uaddr); \
lock = __atomic_hashed_lock((int __force *)uaddr)
#endif
static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
......@@ -59,8 +111,12 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
int ret;
struct __get_user asm_ret;
int uninitialized_var(val), ret;
__futex_prolog();
/* The 32-bit futex code makes this assumption, so validate it here. */
BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
......@@ -71,46 +127,45 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
pagefault_disable();
switch (op) {
case FUTEX_OP_SET:
asm_ret = futex_set(uaddr, oparg);
__futex_set();
break;
case FUTEX_OP_ADD:
asm_ret = futex_add(uaddr, oparg);
__futex_add();
break;
case FUTEX_OP_OR:
asm_ret = futex_or(uaddr, oparg);
__futex_or();
break;
case FUTEX_OP_ANDN:
asm_ret = futex_andn(uaddr, oparg);
__futex_andn();
break;
case FUTEX_OP_XOR:
asm_ret = futex_xor(uaddr, oparg);
__futex_xor();
break;
default:
asm_ret.err = -ENOSYS;
ret = -ENOSYS;
break;
}
pagefault_enable();
ret = asm_ret.err;
if (!ret) {
switch (cmp) {
case FUTEX_OP_CMP_EQ:
ret = (asm_ret.val == cmparg);
ret = (val == cmparg);
break;
case FUTEX_OP_CMP_NE:
ret = (asm_ret.val != cmparg);
ret = (val != cmparg);
break;
case FUTEX_OP_CMP_LT:
ret = (asm_ret.val < cmparg);
ret = (val < cmparg);
break;
case FUTEX_OP_CMP_GE:
ret = (asm_ret.val >= cmparg);
ret = (val >= cmparg);
break;
case FUTEX_OP_CMP_LE:
ret = (asm_ret.val <= cmparg);
ret = (val <= cmparg);
break;
case FUTEX_OP_CMP_GT:
ret = (asm_ret.val > cmparg);
ret = (val > cmparg);
break;
default:
ret = -ENOSYS;
......@@ -120,22 +175,20 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
}
static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
u32 oldval, u32 newval)
u32 oldval, u32 oparg)
{
struct __get_user asm_ret;
int ret, val;
__futex_prolog();
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
asm_ret = futex_cmpxchg(uaddr, oldval, newval);
*uval = asm_ret.val;
return asm_ret.err;
}
__futex_cmpxchg();
#ifndef __tilegx__
/* Return failure from the atomic wrappers. */
struct __get_user __atomic_bad_address(int __user *addr);
#endif
*uval = val;
return ret;
}
#endif /* !__ASSEMBLY__ */
......
arch/tile/include/asm/hardwall.h
View file @ fa2af6e4
......@@ -11,12 +11,14 @@
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* Provide methods for the HARDWALL_FILE for accessing the UDN.
* Provide methods for access control of per-cpu resources like
* UDN, IDN, or IPI.
*/
#ifndef _ASM_TILE_HARDWALL_H
#define _ASM_TILE_HARDWALL_H
#include <arch/chip.h>
#include <linux/ioctl.h>
#define HARDWALL_IOCTL_BASE 0xa2
......@@ -24,8 +26,9 @@
/*
* The HARDWALL_CREATE() ioctl is a macro with a "size" argument.
* The resulting ioctl value is passed to the kernel in conjunction
* with a pointer to a little-endian bitmask of cpus, which must be
* physically in a rectangular configuration on the chip.
* with a pointer to a standard kernel bitmask of cpus.
* For network resources (UDN or IDN) the bitmask must physically
* represent a rectangular configuration on the chip.
* The "size" is the number of bytes of cpu mask data.
*/
#define _HARDWALL_CREATE 1
......@@ -44,13 +47,7 @@
#define HARDWALL_GET_ID \
_IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID)
#ifndef __KERNEL__
/* This is the canonical name expected by userspace. */
#define HARDWALL_FILE "/dev/hardwall"
#else
#ifdef __KERNEL__
/* /proc hooks for hardwall. */
struct proc_dir_entry;
#ifdef CONFIG_HARDWALL
......@@ -59,7 +56,6 @@ int proc_pid_hardwall(struct task_struct *task, char *buffer);
#else
static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {}
#endif
#endif
#endif /* _ASM_TILE_HARDWALL_H */
arch/tile/include/asm/hugetlb.h
View file @ fa2af6e4
......@@ -106,4 +106,25 @@ static inline void arch_release_hugepage(struct page *page)
{
}
#ifdef CONFIG_HUGETLB_SUPER_PAGES
static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable)
{
size_t pagesize = huge_page_size(hstate_vma(vma));
if (pagesize != PUD_SIZE && pagesize != PMD_SIZE)
entry = pte_mksuper(entry);
return entry;
}
#define arch_make_huge_pte arch_make_huge_pte
/* Sizes to scale up page size for PTEs with HV_PTE_SUPER bit. */
enum {
HUGE_SHIFT_PGDIR = 0,
HUGE_SHIFT_PMD = 1,
HUGE_SHIFT_PAGE = 2,
HUGE_SHIFT_ENTRIES
};
extern int huge_shift[HUGE_SHIFT_ENTRIES];
#endif
#endif /* _ASM_TILE_HUGETLB_H */
arch/tile/include/asm/irqflags.h
View file @ fa2af6e4
......@@ -28,10 +28,10 @@
*/
#if CHIP_HAS_AUX_PERF_COUNTERS()
#define LINUX_MASKABLE_INTERRUPTS_HI \
(~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
(~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
#else
#define LINUX_MASKABLE_INTERRUPTS_HI \
(~(INT_MASK_HI(INT_PERF_COUNT)))
(~(INT_MASK_HI(INT_PERF_COUNT)))
#endif
#else
......@@ -90,6 +90,14 @@
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0)
#define interrupt_mask_save_mask() \
(__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \
(((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
#define interrupt_mask_restore_mask(mask) do { \
unsigned long long __m = (mask); \
__insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
} while (0)
#else
#define interrupt_mask_set(n) \
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
......@@ -101,6 +109,10 @@
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
#define interrupt_mask_save_mask() \
__insn_mfspr(SPR_INTERRUPT_MASK_K)
#define interrupt_mask_restore_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
#endif
/*
......@@ -122,7 +134,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
/* Disable all interrupts, including NMIs. */
#define arch_local_irq_disable_all() \
interrupt_mask_set_mask(-1UL)
interrupt_mask_set_mask(-1ULL)
/* Re-enable all maskable interrupts. */
#define arch_local_irq_enable() \
......@@ -179,7 +191,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
#ifdef __tilegx__
#if INT_MEM_ERROR != 0
# error Fix IRQ_DISABLED() macro
# error Fix IRQS_DISABLED() macro
#endif
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
......@@ -207,9 +219,10 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
ld tmp0, tmp0; \
ld tmp0, tmp0
#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */
......@@ -253,17 +266,22 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
{ \
lw tmp0, tmp0; \
addi tmp1, tmp0, 4 \
}; \
lw tmp1, tmp1; \
lw tmp1, tmp1
#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif
#define IRQ_ENABLE(tmp0, tmp1) \
IRQ_ENABLE_LOAD(tmp0, tmp1); \
IRQ_ENABLE_APPLY(tmp0, tmp1)
/*
* Do the CPU's IRQ-state tracing from assembly code. We call a
* C function, but almost everywhere we do, we don't mind clobbering
......
arch/tile/include/asm/kexec.h
View file @ fa2af6e4
......@@ -19,12 +19,24 @@
#include <asm/page.h>
#ifndef __tilegx__
/* Maximum physical address we can use pages from. */
#define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE
/* Maximum address we can reach in physical address mode. */
#define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE
/* Maximum address we can use for the control code buffer. */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#else
/* We need to limit the memory below PGDIR_SIZE since
* we only setup page table for [0, PGDIR_SIZE) before final kexec.
*/
/* Maximum physical address we can use pages from. */
#define KEXEC_SOURCE_MEMORY_LIMIT PGDIR_SIZE
/* Maximum address we can reach in physical address mode. */
#define KEXEC_DESTINATION_MEMORY_LIMIT PGDIR_SIZE
/* Maximum address we can use for the control code buffer. */
#define KEXEC_CONTROL_MEMORY_LIMIT PGDIR_SIZE
#endif
#define KEXEC_CONTROL_PAGE_SIZE PAGE_SIZE
......
arch/tile/include/asm/mmu.h
View file @ fa2af6e4
......@@ -21,7 +21,7 @@ struct mm_context {
* Written under the mmap_sem semaphore; read without the
* semaphore but atomically, but it is conservatively set.
*/
unsigned int priority_cached;
unsigned long priority_cached;
};
typedef struct mm_context mm_context_t;
......
arch/tile/include/asm/mmu_context.h
View file @ fa2af6e4
......@@ -30,11 +30,15 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
return 0;
}
/* Note that arch/tile/kernel/head.S also calls hv_install_context() */
/*
* Note that arch/tile/kernel/head_NN.S and arch/tile/mm/migrate_NN.S
* also call hv_install_context().
*/
static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
{
/* FIXME: DIRECTIO should not always be set. FIXME. */
int rc = hv_install_context(__pa(pgdir), prot, asid, HV_CTX_DIRECTIO);
int rc = hv_install_context(__pa(pgdir), prot, asid,
HV_CTX_DIRECTIO | CTX_PAGE_FLAG);
if (rc < 0)
panic("hv_install_context failed: %d", rc);
}
......
arch/tile/include/asm/module.h 0 → 100644
View file @ fa2af6e4
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#ifndef _ASM_TILE_MODULE_H
#define _ASM_TILE_MODULE_H
#include <arch/chip.h>
#include <asm-generic/module.h>
/* We can't use modules built with different page sizes. */
#if defined(CONFIG_PAGE_SIZE_16KB)
# define MODULE_PGSZ " 16KB"
#elif defined(CONFIG_PAGE_SIZE_64KB)
# define MODULE_PGSZ " 64KB"
#else
# define MODULE_PGSZ ""
#endif
/* We don't really support no-SMP so tag if someone tries. */
#ifdef CONFIG_SMP
#define MODULE_NOSMP ""
#else
#define MODULE_NOSMP " nosmp"
#endif
#define MODULE_ARCH_VERMAGIC CHIP_ARCH_NAME MODULE_PGSZ MODULE_NOSMP
#endif /* _ASM_TILE_MODULE_H */
arch/tile/include/asm/page.h
View file @ fa2af6e4
......@@ -20,8 +20,17 @@
#include <arch/chip.h>
/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
#define PAGE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
#define HPAGE_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#if defined(CONFIG_PAGE_SIZE_16KB)
#define PAGE_SHIFT 14
#define CTX_PAGE_FLAG HV_CTX_PG_SM_16K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PAGE_SHIFT 16
#define CTX_PAGE_FLAG HV_CTX_PG_SM_64K
#else
#define PAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_SMALL
#define CTX_PAGE_FLAG 0
#endif
#define HPAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_LARGE
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT)
......@@ -78,8 +87,7 @@ typedef HV_PTE pgprot_t;
/*
* User L2 page tables are managed as one L2 page table per page,
* because we use the page allocator for them. This keeps the allocation
* simple and makes it potentially useful to implement HIGHPTE at some point.
* However, it's also inefficient, since L2 page tables are much smaller
* simple, but it's also inefficient, since L2 page tables are much smaller
* than pages (currently 2KB vs 64KB). So we should revisit this.
*/
typedef struct page *pgtable_t;
......@@ -128,7 +136,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#define HUGE_MAX_HSTATE 2
#define HUGE_MAX_HSTATE 6
#ifdef CONFIG_HUGETLB_PAGE
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
......
arch/tile/include/asm/pgalloc.h
View file @ fa2af6e4
......@@ -19,24 +19,24 @@
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <asm/fixmap.h>
#include <asm/page.h>
#include <hv/hypervisor.h>
/* Bits for the size of the second-level page table. */
#define L2_KERNEL_PGTABLE_SHIFT \
(HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL + HV_LOG2_PTE_SIZE)
#define L2_KERNEL_PGTABLE_SHIFT _HV_LOG2_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
/* How big is a kernel L2 page table? */
#define L2_KERNEL_PGTABLE_SIZE (1UL << L2_KERNEL_PGTABLE_SHIFT)
/* We currently allocate user L2 page tables by page (unlike kernel L2s). */
#if L2_KERNEL_PGTABLE_SHIFT < HV_LOG2_PAGE_SIZE_SMALL
#define L2_USER_PGTABLE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
#if L2_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
#define L2_USER_PGTABLE_SHIFT PAGE_SHIFT
#else
#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT
#endif
/* How many pages do we need, as an "order", for a user L2 page table? */
#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - HV_LOG2_PAGE_SIZE_SMALL)
/* How big is a kernel L2 page table? */
#define L2_KERNEL_PGTABLE_SIZE (1 << L2_KERNEL_PGTABLE_SHIFT)
#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - PAGE_SHIFT)
static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
{
......@@ -50,14 +50,14 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *ptep)
{
set_pmd(pmd, ptfn_pmd(__pa(ptep) >> HV_LOG2_PAGE_TABLE_ALIGN,
set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(__pa(ptep)),
__pgprot(_PAGE_PRESENT)));
}
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
pgtable_t page)
{
set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(page_to_pfn(page)),
set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(PFN_PHYS(page_to_pfn(page))),
__pgprot(_PAGE_PRESENT)));
}
......@@ -68,8 +68,20 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address);
extern void pte_free(struct mm_struct *mm, struct page *pte);
extern pgtable_t pgtable_alloc_one(struct mm_struct *mm, unsigned long address,
int order);
extern void pgtable_free(struct mm_struct *mm, struct page *pte, int order);
static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
return pgtable_alloc_one(mm, address, L2_USER_PGTABLE_ORDER);
}
static inline void pte_free(struct mm_struct *mm, struct page *pte)
{
pgtable_free(mm, pte, L2_USER_PGTABLE_ORDER);
}
#define pmd_pgtable(pmd) pmd_page(pmd)
......@@ -85,8 +97,13 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
pte_free(mm, virt_to_page(pte));
}
extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address);
extern void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address, int order);
static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address)
{
__pgtable_free_tlb(tlb, pte, address, L2_USER_PGTABLE_ORDER);
}
#define check_pgt_cache() do { } while (0)
......@@ -104,19 +121,44 @@ void shatter_pmd(pmd_t *pmd);
void shatter_huge_page(unsigned long addr);
#ifdef __tilegx__
/* We share a single page allocator for both L1 and L2 page tables. */
#if HV_L1_SIZE != HV_L2_SIZE
# error Rework assumption that L1 and L2 page tables are same size.
#endif
#define L1_USER_PGTABLE_ORDER L2_USER_PGTABLE_ORDER
#define pud_populate(mm, pud, pmd) \
pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd))
#define pmd_alloc_one(mm, addr) \
((pmd_t *)page_to_virt(pte_alloc_one((mm), (addr))))
#define pmd_free(mm, pmdp) \
pte_free((mm), virt_to_page(pmdp))
#define __pmd_free_tlb(tlb, pmdp, address) \
__pte_free_tlb((tlb), virt_to_page(pmdp), (address))
/* Bits for the size of the L1 (intermediate) page table. */
#define L1_KERNEL_PGTABLE_SHIFT _HV_LOG2_L1_SIZE(HPAGE_SHIFT)
/* How big is a kernel L2 page table? */
#define L1_KERNEL_PGTABLE_SIZE (1UL << L1_KERNEL_PGTABLE_SHIFT)
/* We currently allocate L1 page tables by page. */
#if L1_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
#define L1_USER_PGTABLE_SHIFT PAGE_SHIFT
#else
#define L1_USER_PGTABLE_SHIFT L1_KERNEL_PGTABLE_SHIFT
#endif
/* How many pages do we need, as an "order", for an L1 page table? */
#define L1_USER_PGTABLE_ORDER (L1_USER_PGTABLE_SHIFT - PAGE_SHIFT)
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *p = pgtable_alloc_one(mm, address, L1_USER_PGTABLE_ORDER);
return (pmd_t *)page_to_virt(p);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmdp)
{
pgtable_free(mm, virt_to_page(pmdp), L1_USER_PGTABLE_ORDER);
}
static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
unsigned long address)
{
__pgtable_free_tlb(tlb, virt_to_page(pmdp), address,
L1_USER_PGTABLE_ORDER);
}
#endif /* __tilegx__ */
#endif /* _ASM_TILE_PGALLOC_H */
arch/tile/include/asm/pgtable.h
View file @ fa2af6e4
......@@ -27,8 +27,10 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/pfn.h>
#include <asm/processor.h>
#include <asm/fixmap.h>
#include <asm/page.h>
struct mm_struct;
struct vm_area_struct;
......@@ -69,6 +71,7 @@ extern void set_page_homes(void);
#define _PAGE_PRESENT HV_PTE_PRESENT
#define _PAGE_HUGE_PAGE HV_PTE_PAGE
#define _PAGE_SUPER_PAGE HV_PTE_SUPER
#define _PAGE_READABLE HV_PTE_READABLE
#define _PAGE_WRITABLE HV_PTE_WRITABLE
#define _PAGE_EXECUTABLE HV_PTE_EXECUTABLE
......@@ -85,6 +88,7 @@ extern void set_page_homes(void);
#define _PAGE_ALL (\
_PAGE_PRESENT | \
_PAGE_HUGE_PAGE | \
_PAGE_SUPER_PAGE | \
_PAGE_READABLE | \
_PAGE_WRITABLE | \
_PAGE_EXECUTABLE | \
......@@ -162,7 +166,7 @@ extern void set_page_homes(void);
(pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val }
/* Just setting the PFN to zero suffices. */
#define pte_pgprot(x) hv_pte_set_pfn((x), 0)
#define pte_pgprot(x) hv_pte_set_pa((x), 0)
/*
* For PTEs and PDEs, we must clear the Present bit first when
......@@ -187,6 +191,7 @@ static inline void __pte_clear(pte_t *ptep)
* Undefined behaviour if not..
*/
#define pte_present hv_pte_get_present
#define pte_mknotpresent hv_pte_clear_present
#define pte_user hv_pte_get_user
#define pte_read hv_pte_get_readable
#define pte_dirty hv_pte_get_dirty
......@@ -194,6 +199,7 @@ static inline void __pte_clear(pte_t *ptep)
#define pte_write hv_pte_get_writable
#define pte_exec hv_pte_get_executable
#define pte_huge hv_pte_get_page
#define pte_super hv_pte_get_super
#define pte_rdprotect hv_pte_clear_readable
#define pte_exprotect hv_pte_clear_executable
#define pte_mkclean hv_pte_clear_dirty
......@@ -206,6 +212,7 @@ static inline void __pte_clear(pte_t *ptep)
#define pte_mkyoung hv_pte_set_accessed
#define pte_mkwrite hv_pte_set_writable
#define pte_mkhuge hv_pte_set_page
#define pte_mksuper hv_pte_set_super
#define pte_special(pte) 0
#define pte_mkspecial(pte) (pte)
......@@ -261,7 +268,7 @@ static inline int pte_none(pte_t pte)
static inline unsigned long pte_pfn(pte_t pte)
{
return hv_pte_get_pfn(pte);
return PFN_DOWN(hv_pte_get_pa(pte));
}
/* Set or get the remote cache cpu in a pgprot with remote caching. */
......@@ -270,7 +277,7 @@ extern int get_remote_cache_cpu(pgprot_t prot);
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
{
return hv_pte_set_pfn(prot, pfn);
return hv_pte_set_pa(prot, PFN_PHYS(pfn));
}
/* Support for priority mappings. */
......@@ -312,7 +319,7 @@ extern void check_mm_caching(struct mm_struct *prev, struct mm_struct *next);
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
return pfn_pte(hv_pte_get_pfn(pte), newprot);
return pfn_pte(pte_pfn(pte), newprot);
}
/*
......@@ -335,13 +342,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
*/
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
#if defined(CONFIG_HIGHPTE)
extern pte_t *pte_offset_map(pmd_t *, unsigned long address);
#define pte_unmap(pte) kunmap_atomic(pte)
#else
#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
#define pte_unmap(pte) do { } while (0)
#endif
/* Clear a non-executable kernel PTE and flush it from the TLB. */
#define kpte_clear_flush(ptep, vaddr) \
......@@ -410,6 +412,46 @@ static inline unsigned long pmd_index(unsigned long address)
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
return ptep_test_and_clear_young(vma, address, pmdp_ptep(pmdp));
}
#define __HAVE_ARCH_PMDP_SET_WRPROTECT
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
ptep_set_wrprotect(mm, address, pmdp_ptep(pmdp));
}
#define __HAVE_ARCH_PMDP_GET_AND_CLEAR
static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
unsigned long address,
pmd_t *pmdp)
{
return pte_pmd(ptep_get_and_clear(mm, address, pmdp_ptep(pmdp)));
}
static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
set_pte(pmdp_ptep(pmdp), pmd_pte(pmdval));
}
#define set_pmd_at(mm, addr, pmdp, pmdval) __set_pmd(pmdp, pmdval)
/* Create a pmd from a PTFN. */
static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
{
return pte_pmd(hv_pte_set_ptfn(prot, ptfn));
}
/* Return the page-table frame number (ptfn) that a pmd_t points at. */
#define pmd_ptfn(pmd) hv_pte_get_ptfn(pmd_pte(pmd))
/*
* A given kernel pmd_t maps to a specific virtual address (either a
* kernel huge page or a kernel pte_t table). Since kernel pte_t
......@@ -430,7 +472,48 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
* OK for pte_lockptr(), since we just end up with potentially one
* lock being used for several pte_t arrays.
*/
#define pmd_page(pmd) pfn_to_page(HV_PTFN_TO_PFN(pmd_ptfn(pmd)))
#define pmd_page(pmd) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pmd_ptfn(pmd))))
static inline void pmd_clear(pmd_t *pmdp)
{
__pte_clear(pmdp_ptep(pmdp));
}
#define pmd_mknotpresent(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
#define pmd_young(pmd) pte_young(pmd_pte(pmd))
#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd)))
#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd)))
#define pmd_write(pmd) pte_write(pmd_pte(pmd))
#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
#define pmd_huge_page(pmd) pte_huge(pmd_pte(pmd))
#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd)))
#define __HAVE_ARCH_PMD_WRITE
#define pfn_pmd(pfn, pgprot) pte_pmd(pfn_pte((pfn), (pgprot)))
#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd))
#define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot))
static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
{
return pfn_pmd(pmd_pfn(pmd), newprot);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define has_transparent_hugepage() 1
#define pmd_trans_huge pmd_huge_page
static inline pmd_t pmd_mksplitting(pmd_t pmd)
{
return pte_pmd(hv_pte_set_client2(pmd_pte(pmd)));
}
static inline int pmd_trans_splitting(pmd_t pmd)
{
return hv_pte_get_client2(pmd_pte(pmd));
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
* The pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
......@@ -448,17 +531,13 @@ static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
}
static inline int pmd_huge_page(pmd_t pmd)
{
return pmd_val(pmd) & _PAGE_HUGE_PAGE;
}
#include <asm-generic/pgtable.h>
/* Support /proc/NN/pgtable API. */
struct seq_file;
int arch_proc_pgtable_show(struct seq_file *m, struct mm_struct *mm,
unsigned long vaddr, pte_t *ptep, void **datap);
unsigned long vaddr, unsigned long pagesize,
pte_t *ptep, void **datap);
#endif /* !__ASSEMBLY__ */
......
arch/tile/include/asm/pgtable_32.h
View file @ fa2af6e4
......@@ -20,11 +20,12 @@
* The level-1 index is defined by the huge page size. A PGD is composed
* of PTRS_PER_PGD pgd_t's and is the top level of the page table.
*/
#define PGDIR_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#define PGDIR_SIZE HV_PAGE_SIZE_LARGE
#define PGDIR_SHIFT HPAGE_SHIFT
#define PGDIR_SIZE HPAGE_SIZE
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
#define PTRS_PER_PGD _HV_L1_ENTRIES(HPAGE_SHIFT)
#define PGD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
#define SIZEOF_PGD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
......@@ -33,8 +34,9 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
#ifndef __ASSEMBLY__
......@@ -111,24 +113,14 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
return pte;
}
static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
set_pte(&pmdp->pud.pgd, pmdval.pud.pgd);
}
/* Create a pmd from a PTFN. */
static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
{
return (pmd_t){ { hv_pte_set_ptfn(prot, ptfn) } };
}
/* Return the page-table frame number (ptfn) that a pmd_t points at. */
#define pmd_ptfn(pmd) hv_pte_get_ptfn((pmd).pud.pgd)
static inline void pmd_clear(pmd_t *pmdp)
{
__pte_clear(&pmdp->pud.pgd);
}
/*
* pmds are wrappers around pgds, which are the same as ptes.
* It's often convenient to "cast" back and forth and use the pte methods,
* which are the methods supplied by the hypervisor.
*/
#define pmd_pte(pmd) ((pmd).pud.pgd)
#define pmdp_ptep(pmdp) (&(pmdp)->pud.pgd)
#define pte_pmd(pte) ((pmd_t){ { (pte) } })
#endif /* __ASSEMBLY__ */
......
arch/tile/include/asm/pgtable_64.h
View file @ fa2af6e4
......@@ -21,17 +21,19 @@
#define PGDIR_SIZE HV_L1_SPAN
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD HV_L0_ENTRIES
#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
#define PGD_INDEX(va) HV_L0_INDEX(va)
#define SIZEOF_PGD HV_L0_SIZE
/*
* The level-1 index is defined by the huge page size. A PMD is composed
* of PTRS_PER_PMD pgd_t's and is the middle level of the page table.
*/
#define PMD_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#define PMD_SIZE HV_PAGE_SIZE_LARGE
#define PMD_SHIFT HPAGE_SHIFT
#define PMD_SIZE HPAGE_SIZE
#define PMD_MASK (~(PMD_SIZE-1))
#define PTRS_PER_PMD (1 << (PGDIR_SHIFT - PMD_SHIFT))
#define SIZEOF_PMD (PTRS_PER_PMD * sizeof(pmd_t))
#define PTRS_PER_PMD _HV_L1_ENTRIES(HPAGE_SHIFT)
#define PMD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
#define SIZEOF_PMD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
......@@ -40,17 +42,19 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
/*
* Align the vmalloc area to an L2 page table, and leave a guard page
* at the beginning and end. The vmalloc code also puts in an internal
* Align the vmalloc area to an L2 page table. Omit guard pages at
* the beginning and end for simplicity (particularly in the per-cpu
* memory allocation code). The vmalloc code puts in an internal
* guard page between each allocation.
*/
#define _VMALLOC_END HUGE_VMAP_BASE
#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE)
#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE)
#define VMALLOC_END _VMALLOC_END
#define VMALLOC_START _VMALLOC_START
#define HUGE_VMAP_END (HUGE_VMAP_BASE + PGDIR_SIZE)
......@@ -98,7 +102,7 @@ static inline int pud_bad(pud_t pud)
* A pud_t points to a pmd_t array. Since we can have multiple per
* page, we don't have a one-to-one mapping of pud_t's to pages.
*/
#define pud_page(pud) pfn_to_page(HV_PTFN_TO_PFN(pud_ptfn(pud)))
#define pud_page(pud) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pud_ptfn(pud))))
static inline unsigned long pud_index(unsigned long address)
{
......@@ -108,28 +112,6 @@ static inline unsigned long pud_index(unsigned long address)
#define pmd_offset(pud, address) \
((pmd_t *)pud_page_vaddr(*(pud)) + pmd_index(address))
static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
set_pte(pmdp, pmdval);
}
/* Create a pmd from a PTFN and pgprot. */
static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
{
return hv_pte_set_ptfn(prot, ptfn);
}
/* Return the page-table frame number (ptfn) that a pmd_t points at. */
static inline unsigned long pmd_ptfn(pmd_t pmd)
{
return hv_pte_get_ptfn(pmd);
}
static inline void pmd_clear(pmd_t *pmdp)
{
__pte_clear(pmdp);
}
/* Normalize an address to having the correct high bits set. */
#define pgd_addr_normalize pgd_addr_normalize
static inline unsigned long pgd_addr_normalize(unsigned long addr)
......@@ -170,6 +152,13 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
return hv_pte(__insn_exch(&ptep->val, 0UL));
}
/*
* pmds are the same as pgds and ptes, so converting is a no-op.
*/
#define pmd_pte(pmd) (pmd)
#define pmdp_ptep(pmdp) (pmdp)
#define pte_pmd(pte) (pte)
#endif /* __ASSEMBLY__ */
#endif /* _ASM_TILE_PGTABLE_64_H */
arch/tile/include/asm/processor.h
View file @ fa2af6e4
......@@ -76,6 +76,17 @@ struct async_tlb {
#ifdef CONFIG_HARDWALL
struct hardwall_info;
struct hardwall_task {
/* Which hardwall is this task tied to? (or NULL if none) */
struct hardwall_info *info;
/* Chains this task into the list at info->task_head. */
struct list_head list;
};
#ifdef __tilepro__
#define HARDWALL_TYPES 1 /* udn */
#else
#define HARDWALL_TYPES 3 /* udn, idn, and ipi */
#endif
#endif
struct thread_struct {
......@@ -116,10 +127,8 @@ struct thread_struct {
unsigned long dstream_pf;
#endif
#ifdef CONFIG_HARDWALL
/* Is this task tied to an activated hardwall? */
struct hardwall_info *hardwall;
/* Chains this task into the list at hardwall->list. */
struct list_head hardwall_list;
/* Hardwall information for various resources. */
struct hardwall_task hardwall[HARDWALL_TYPES];
#endif
#if CHIP_HAS_TILE_DMA()
/* Async DMA TLB fault information */
......
arch/tile/include/asm/setup.h
View file @ fa2af6e4
......@@ -41,15 +41,15 @@ void restrict_dma_mpls(void);
#ifdef CONFIG_HARDWALL
/* User-level network management functions */
void reset_network_state(void);
void grant_network_mpls(void);
void restrict_network_mpls(void);
struct task_struct;
int hardwall_deactivate(struct task_struct *task);
void hardwall_switch_tasks(struct task_struct *prev, struct task_struct *next);
void hardwall_deactivate_all(struct task_struct *task);
int hardwall_ipi_valid(int cpu);
/* Hook hardwall code into changes in affinity. */
#define arch_set_cpus_allowed(p, new_mask) do { \
if (p->thread.hardwall && !cpumask_equal(&p->cpus_allowed, new_mask)) \
hardwall_deactivate(p); \
if (!cpumask_equal(&p->cpus_allowed, new_mask)) \
hardwall_deactivate_all(p); \
} while (0)
#endif
......
arch/tile/include/asm/syscalls.h
View file @ fa2af6e4
......@@ -43,7 +43,8 @@ long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
u32 len, int advice);
int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
u32 len_lo, u32 len_hi, int advice);
long sys_flush_cache(void);
long sys_cacheflush(unsigned long addr, unsigned long len,
unsigned long flags);
#ifndef __tilegx__ /* No mmap() in the 32-bit kernel. */
#define sys_mmap sys_mmap
#endif
......
arch/tile/include/asm/tlbflush.h
View file @ fa2af6e4
......@@ -38,16 +38,11 @@ DECLARE_PER_CPU(int, current_asid);
/* The hypervisor tells us what ASIDs are available to us. */
extern int min_asid, max_asid;
static inline unsigned long hv_page_size(const struct vm_area_struct *vma)
{
return (vma->vm_flags & VM_HUGETLB) ? HPAGE_SIZE : PAGE_SIZE;
}
/* Pass as vma pointer for non-executable mapping, if no vma available. */
#define FLUSH_NONEXEC ((const struct vm_area_struct *)-1UL)
#define FLUSH_NONEXEC ((struct vm_area_struct *)-1UL)
/* Flush a single user page on this cpu. */
static inline void local_flush_tlb_page(const struct vm_area_struct *vma,
static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr,
unsigned long page_size)
{
......@@ -60,7 +55,7 @@ static inline void local_flush_tlb_page(const struct vm_area_struct *vma,
}
/* Flush range of user pages on this cpu. */
static inline void local_flush_tlb_pages(const struct vm_area_struct *vma,
static inline void local_flush_tlb_pages(struct vm_area_struct *vma,
unsigned long addr,
unsigned long page_size,
unsigned long len)
......@@ -117,10 +112,10 @@ extern void flush_tlb_all(void);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void flush_tlb_current_task(void);
extern void flush_tlb_mm(struct mm_struct *);
extern void flush_tlb_page(const struct vm_area_struct *, unsigned long);
extern void flush_tlb_page_mm(const struct vm_area_struct *,
extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
extern void flush_tlb_page_mm(struct vm_area_struct *,
struct mm_struct *, unsigned long);
extern void flush_tlb_range(const struct vm_area_struct *,
extern void flush_tlb_range(struct vm_area_struct *,
unsigned long start, unsigned long end);
#define flush_tlb() flush_tlb_current_task()
......
arch/tile/include/asm/uaccess.h
View file @ fa2af6e4
......@@ -114,45 +114,75 @@ struct exception_table_entry {
extern int fixup_exception(struct pt_regs *regs);
/*
* We return the __get_user_N function results in a structure,
* thus in r0 and r1. If "err" is zero, "val" is the result
* of the read; otherwise, "err" is -EFAULT.
*
* We rarely need 8-byte values on a 32-bit architecture, but
* we size the structure to accommodate. In practice, for the
* the smaller reads, we can zero the high word for free, and
* the caller will ignore it by virtue of casting anyway.
* Support macros for __get_user().
*
* Implementation note: The "case 8" logic of casting to the type of
* the result of subtracting the value from itself is basically a way
* of keeping all integer types the same, but casting any pointers to
* ptrdiff_t, i.e. also an integer type. This way there are no
* questionable casts seen by the compiler on an ILP32 platform.
*
* Note that __get_user() and __put_user() assume proper alignment.
*/
struct __get_user {
unsigned long long val;
int err;
};
/*
* FIXME: we should express these as inline extended assembler, since
* they're fundamentally just a variable dereference and some
* supporting exception_table gunk. Note that (a la i386) we can
* extend the copy_to_user and copy_from_user routines to call into
* such extended assembler routines, though we will have to use a
* different return code in that case (1, 2, or 4, rather than -EFAULT).
*/
extern struct __get_user __get_user_1(const void __user *);
extern struct __get_user __get_user_2(const void __user *);
extern struct __get_user __get_user_4(const void __user *);
extern struct __get_user __get_user_8(const void __user *);
extern int __put_user_1(long, void __user *);
extern int __put_user_2(long, void __user *);
extern int __put_user_4(long, void __user *);
extern int __put_user_8(long long, void __user *);
/* Unimplemented routines to cause linker failures */
extern struct __get_user __get_user_bad(void);
extern int __put_user_bad(void);
#ifdef __LP64__
#define _ASM_PTR ".quad"
#else
#define _ASM_PTR ".long"
#endif
#define __get_user_asm(OP, x, ptr, ret) \
asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \
".pushsection .fixup,\"ax\"\n" \
"0: { movei %1, 0; movei %0, %3 }\n" \
"j 9f\n" \
".section __ex_table,\"a\"\n" \
_ASM_PTR " 1b, 0b\n" \
".popsection\n" \
"9:" \
: "=r" (ret), "=r" (x) \
: "r" (ptr), "i" (-EFAULT))
#ifdef __tilegx__
#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
#else
#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
#define __get_user_2(x, ptr, ret) __get_user_asm(lh_u, x, ptr, ret)
#define __get_user_4(x, ptr, ret) __get_user_asm(lw, x, ptr, ret)
#ifdef __LITTLE_ENDIAN
#define __lo32(a, b) a
#define __hi32(a, b) b
#else
#define __lo32(a, b) b
#define __hi32(a, b) a
#endif
#define __get_user_8(x, ptr, ret) \
({ \
unsigned int __a, __b; \
asm volatile("1: { lw %1, %3; addi %2, %3, 4 }\n" \
"2: { lw %2, %2; movei %0, 0 }\n" \
".pushsection .fixup,\"ax\"\n" \
"0: { movei %1, 0; movei %2, 0 }\n" \
"{ movei %0, %4; j 9f }\n" \
".section __ex_table,\"a\"\n" \
".word 1b, 0b\n" \
".word 2b, 0b\n" \
".popsection\n" \
"9:" \
: "=r" (ret), "=r" (__a), "=&r" (__b) \
: "r" (ptr), "i" (-EFAULT)); \
(x) = (__typeof(x))(__typeof((x)-(x))) \
(((u64)__hi32(__a, __b) << 32) | \
__lo32(__a, __b)); \
})
#endif
extern int __get_user_bad(void)
__attribute__((warning("sizeof __get_user argument not 1, 2, 4 or 8")));
/*
* Careful: we have to cast the result to the type of the pointer
* for sign reasons.
*/
/**
* __get_user: - Get a simple variable from user space, with less checking.
* @x: Variable to store result.
......@@ -174,30 +204,62 @@ extern int __put_user_bad(void);
* function.
*/
#define __get_user(x, ptr) \
({ struct __get_user __ret; \
__typeof__(*(ptr)) const __user *__gu_addr = (ptr); \
__chk_user_ptr(__gu_addr); \
switch (sizeof(*(__gu_addr))) { \
case 1: \
__ret = __get_user_1(__gu_addr); \
break; \
case 2: \
__ret = __get_user_2(__gu_addr); \
break; \
case 4: \
__ret = __get_user_4(__gu_addr); \
break; \
case 8: \
__ret = __get_user_8(__gu_addr); \
break; \
default: \
__ret = __get_user_bad(); \
break; \
} \
(x) = (__typeof__(*__gu_addr)) (__typeof__(*__gu_addr - *__gu_addr)) \
__ret.val; \
__ret.err; \
})
({ \
int __ret; \
__chk_user_ptr(ptr); \
switch (sizeof(*(ptr))) { \
case 1: __get_user_1(x, ptr, __ret); break; \
case 2: __get_user_2(x, ptr, __ret); break; \
case 4: __get_user_4(x, ptr, __ret); break; \
case 8: __get_user_8(x, ptr, __ret); break; \
default: __ret = __get_user_bad(); break; \
} \
__ret; \
})
/* Support macros for __put_user(). */
#define __put_user_asm(OP, x, ptr, ret) \
asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \
".pushsection .fixup,\"ax\"\n" \
"0: { movei %0, %3; j 9f }\n" \
".section __ex_table,\"a\"\n" \
_ASM_PTR " 1b, 0b\n" \
".popsection\n" \
"9:" \
: "=r" (ret) \
: "r" (ptr), "r" (x), "i" (-EFAULT))
#ifdef __tilegx__
#define __put_user_1(x, ptr, ret) __put_user_asm(st1, x, ptr, ret)
#define __put_user_2(x, ptr, ret) __put_user_asm(st2, x, ptr, ret)
#define __put_user_4(x, ptr, ret) __put_user_asm(st4, x, ptr, ret)
#define __put_user_8(x, ptr, ret) __put_user_asm(st, x, ptr, ret)
#else
#define __put_user_1(x, ptr, ret) __put_user_asm(sb, x, ptr, ret)
#define __put_user_2(x, ptr, ret) __put_user_asm(sh, x, ptr, ret)
#define __put_user_4(x, ptr, ret) __put_user_asm(sw, x, ptr, ret)
#define __put_user_8(x, ptr, ret) \
({ \
u64 __x = (__typeof((x)-(x)))(x); \
int __lo = (int) __x, __hi = (int) (__x >> 32); \
asm volatile("1: { sw %1, %2; addi %0, %1, 4 }\n" \
"2: { sw %0, %3; movei %0, 0 }\n" \
".pushsection .fixup,\"ax\"\n" \
"0: { movei %0, %4; j 9f }\n" \
".section __ex_table,\"a\"\n" \
".word 1b, 0b\n" \
".word 2b, 0b\n" \
".popsection\n" \
"9:" \
: "=&r" (ret) \
: "r" (ptr), "r" (__lo32(__lo, __hi)), \
"r" (__hi32(__lo, __hi)), "i" (-EFAULT)); \
})
#endif
extern int __put_user_bad(void)
__attribute__((warning("sizeof __put_user argument not 1, 2, 4 or 8")));
/**
* __put_user: - Write a simple value into user space, with less checking.
......@@ -217,39 +279,19 @@ extern int __put_user_bad(void);
* function.
*
* Returns zero on success, or -EFAULT on error.
*
* Implementation note: The "case 8" logic of casting to the type of
* the result of subtracting the value from itself is basically a way
* of keeping all integer types the same, but casting any pointers to
* ptrdiff_t, i.e. also an integer type. This way there are no
* questionable casts seen by the compiler on an ILP32 platform.
*/
#define __put_user(x, ptr) \
({ \
int __pu_err = 0; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
typeof(*__pu_addr) __pu_val = (x); \
__chk_user_ptr(__pu_addr); \
switch (sizeof(__pu_val)) { \
case 1: \
__pu_err = __put_user_1((long)__pu_val, __pu_addr); \
break; \
case 2: \
__pu_err = __put_user_2((long)__pu_val, __pu_addr); \
break; \
case 4: \
__pu_err = __put_user_4((long)__pu_val, __pu_addr); \
break; \
case 8: \
__pu_err = \
__put_user_8((__typeof__(__pu_val - __pu_val))__pu_val,\
__pu_addr); \
break; \
default: \
__pu_err = __put_user_bad(); \
break; \
int __ret; \
__chk_user_ptr(ptr); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_1(x, ptr, __ret); break; \
case 2: __put_user_2(x, ptr, __ret); break; \
case 4: __put_user_4(x, ptr, __ret); break; \
case 8: __put_user_8(x, ptr, __ret); break; \
default: __ret = __put_user_bad(); break; \
} \
__pu_err; \
__ret; \
})
/*
......@@ -378,7 +420,7 @@ static inline unsigned long __must_check copy_from_user(void *to,
/**
* __copy_in_user() - copy data within user space, with less checking.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
......
arch/tile/include/asm/unistd.h
View file @ fa2af6e4
......@@ -24,8 +24,8 @@
#include <asm-generic/unistd.h>
/* Additional Tilera-specific syscalls. */
#define __NR_flush_cache (__NR_arch_specific_syscall + 1)
__SYSCALL(__NR_flush_cache, sys_flush_cache)
#define __NR_cacheflush (__NR_arch_specific_syscall + 1)
__SYSCALL(__NR_cacheflush, sys_cacheflush)
#ifndef __tilegx__
/* "Fast" syscalls provide atomic support for 32-bit chips. */
......
arch/tile/include/hv/drv_xgbe_intf.h
View file @ fa2af6e4
......@@ -460,7 +460,7 @@ typedef void* lepp_comp_t;
* linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
* our page size of exactly 65536. We add one for a "body" fragment.
*/
#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
#define LEPP_MAX_FRAGS (65536 / HV_DEFAULT_PAGE_SIZE_SMALL + 2 + 1)
/** Total number of bytes needed for an lepp_tso_cmd_t. */
#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
......
arch/tile/include/hv/hypervisor.h
View file @ fa2af6e4
This diff is collapsed.
arch/tile/kernel/Makefile
View file @ fa2af6e4
......@@ -9,10 +9,9 @@ obj-y := backtrace.o entry.o irq.o messaging.o \
intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
obj-$(CONFIG_HARDWALL) += hardwall.o
obj-$(CONFIG_TILEGX) += futex_64.o
obj-$(CONFIG_COMPAT) += compat.o compat_signal.o
obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o
obj-$(CONFIG_PCI) += pci.o
arch/tile/kernel/entry.S
View file @ fa2af6e4
......@@ -100,8 +100,9 @@ STD_ENTRY(smp_nap)
*/
STD_ENTRY(_cpu_idle)
movei r1, 1
IRQ_ENABLE_LOAD(r2, r3)
mtspr INTERRUPT_CRITICAL_SECTION, r1
IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */
mtspr INTERRUPT_CRITICAL_SECTION, zero
.global _cpu_idle_nap
_cpu_idle_nap:
......
arch/tile/kernel/hardwall.c
View file @ fa2af6e4
This diff is collapsed.
arch/tile/kernel/head_32.S
View file @ fa2af6e4
......@@ -69,7 +69,7 @@ ENTRY(_start)
}
{
moveli lr, lo16(1f)
move r5, zero
moveli r5, CTX_PAGE_FLAG
}
{
auli lr, lr, ha16(1f)
......@@ -141,11 +141,11 @@ ENTRY(empty_zero_page)
.macro PTE va, cpa, bits1, no_org=0
.ifeq \no_org
.org swapper_pg_dir + HV_L1_INDEX(\va) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(\va) * HV_PTE_SIZE
.endif
.word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
(HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
.word (\bits1) | (HV_CPA_TO_PFN(\cpa) << (HV_PTE_INDEX_PFN - 32))
.word (\bits1) | (HV_CPA_TO_PTFN(\cpa) << (HV_PTE_INDEX_PTFN - 32))
.endm
__PAGE_ALIGNED_DATA
......@@ -166,7 +166,7 @@ ENTRY(swapper_pg_dir)
/* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
PTE MEM_SV_INTRPT, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
(1 << (HV_PTE_INDEX_EXECUTABLE - 32))
.org swapper_pg_dir + HV_L1_SIZE
.org swapper_pg_dir + PGDIR_SIZE
END(swapper_pg_dir)
/*
......
arch/tile/kernel/head_64.S
View file @ fa2af6e4
......@@ -114,7 +114,7 @@ ENTRY(_start)
shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET)
}
{
move r3, zero
moveli r3, CTX_PAGE_FLAG
j hv_install_context
}
1:
......@@ -210,19 +210,19 @@ ENTRY(empty_zero_page)
.macro PTE cpa, bits1
.quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\
HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\
(\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
(\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN)
.endm
__PAGE_ALIGNED_DATA
.align PAGE_SIZE
ENTRY(swapper_pg_dir)
.org swapper_pg_dir + HV_L0_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
.Lsv_data_pmd:
.quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */
.org swapper_pg_dir + HV_L0_INDEX(MEM_SV_START) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE
.Lsv_code_pmd:
.quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */
.org swapper_pg_dir + HV_L0_SIZE
.org swapper_pg_dir + SIZEOF_PGD
END(swapper_pg_dir)
.align HV_PAGE_TABLE_ALIGN
......@@ -233,11 +233,11 @@ ENTRY(temp_data_pmd)
* permissions later.
*/
.set addr, 0
.rept HV_L1_ENTRIES
.rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE
.set addr, addr + HV_PAGE_SIZE_LARGE
.set addr, addr + HPAGE_SIZE
.endr
.org temp_data_pmd + HV_L1_SIZE
.org temp_data_pmd + SIZEOF_PMD
END(temp_data_pmd)
.align HV_PAGE_TABLE_ALIGN
......@@ -248,11 +248,11 @@ ENTRY(temp_code_pmd)
* permissions later.
*/
.set addr, 0
.rept HV_L1_ENTRIES
.rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE
.set addr, addr + HV_PAGE_SIZE_LARGE
.set addr, addr + HPAGE_SIZE
.endr
.org temp_code_pmd + HV_L1_SIZE
.org temp_code_pmd + SIZEOF_PMD
END(temp_code_pmd)
/*
......
arch/tile/kernel/hvglue.lds
View file @ fa2af6e4
......@@ -55,4 +55,5 @@ hv_store_mapping = TEXT_OFFSET + 0x106a0;
hv_inquire_realpa = TEXT_OFFSET + 0x106c0;
hv_flush_all = TEXT_OFFSET + 0x106e0;
hv_get_ipi_pte = TEXT_OFFSET + 0x10700;
hv_glue_internals = TEXT_OFFSET + 0x10720;
hv_set_pte_super_shift = TEXT_OFFSET + 0x10720;
hv_glue_internals = TEXT_OFFSET + 0x10740;
arch/tile/kernel/intvec_64.S
View file @ fa2af6e4
......@@ -220,7 +220,9 @@ intvec_\vecname:
* This routine saves just the first four registers, plus the
* stack context so we can do proper backtracing right away,
* and defers to handle_interrupt to save the rest.
* The backtracer needs pc, ex1, lr, sp, r52, and faultnum.
* The backtracer needs pc, ex1, lr, sp, r52, and faultnum,
* and needs sp set to its final location at the bottom of
* the stack frame.
*/
addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
wh64 r0 /* cache line 7 */
......@@ -450,23 +452,6 @@ intvec_\vecname:
push_reg r5, r52
st r52, r4
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, hw2_last(__per_cpu_offset)
}
{
shl16insli r21, r21, hw1(__per_cpu_offset)
bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
}
shl16insli r21, r21, hw0(__per_cpu_offset)
shl3add r20, r20, r21
ld tp, r20
#else
move tp, zero
#endif
/*
* If we will be returning to the kernel, we will need to
* reset the interrupt masks to the state they had before.
......@@ -489,6 +474,44 @@ intvec_\vecname:
.endif
st r21, r32
/*
* we've captured enough state to the stack (including in
* particular our EX_CONTEXT state) that we can now release
* the interrupt critical section and replace it with our
* standard "interrupts disabled" mask value. This allows
* synchronous interrupts (and profile interrupts) to punch
* through from this point onwards.
*
* It's important that no code before this point touch memory
* other than our own stack (to keep the invariant that this
* is all that gets touched under ICS), and that no code after
* this point reference any interrupt-specific SPR, in particular
* the EX_CONTEXT_K_ values.
*/
.ifc \function,handle_nmi
IRQ_DISABLE_ALL(r20)
.else
IRQ_DISABLE(r20, r21)
.endif
mtspr INTERRUPT_CRITICAL_SECTION, zero
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, hw2_last(__per_cpu_offset)
}
{
shl16insli r21, r21, hw1(__per_cpu_offset)
bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
}
shl16insli r21, r21, hw0(__per_cpu_offset)
shl3add r20, r20, r21
ld tp, r20
#else
move tp, zero
#endif
#ifdef __COLLECT_LINKER_FEEDBACK__
/*
* Notify the feedback routines that we were in the
......@@ -512,21 +535,6 @@ intvec_\vecname:
FEEDBACK_ENTER(\function)
#endif
/*
* we've captured enough state to the stack (including in
* particular our EX_CONTEXT state) that we can now release
* the interrupt critical section and replace it with our
* standard "interrupts disabled" mask value. This allows
* synchronous interrupts (and profile interrupts) to punch
* through from this point onwards.
*/
.ifc \function,handle_nmi
IRQ_DISABLE_ALL(r20)
.else
IRQ_DISABLE(r20, r21)
.endif
mtspr INTERRUPT_CRITICAL_SECTION, zero
/*
* Prepare the first 256 stack bytes to be rapidly accessible
* without having to fetch the background data.
......@@ -736,9 +744,10 @@ STD_ENTRY(interrupt_return)
beqzt r30, .Lrestore_regs
j 3f
2: TRACE_IRQS_ON
IRQ_ENABLE_LOAD(r20, r21)
movei r0, 1
mtspr INTERRUPT_CRITICAL_SECTION, r0
IRQ_ENABLE(r20, r21)
IRQ_ENABLE_APPLY(r20, r21)
beqzt r30, .Lrestore_regs
3:
......@@ -755,7 +764,6 @@ STD_ENTRY(interrupt_return)
* that will save some cycles if this turns out to be a syscall.
*/
.Lrestore_regs:
FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */
/*
* Rotate so we have one high bit and one low bit to test.
......@@ -1249,7 +1257,7 @@ STD_ENTRY(fill_ra_stack)
int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign
int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault
int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr
int_hand INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap
int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap
int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt
int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr
......
arch/tile/kernel/machine_kexec.c
View file @ fa2af6e4
......@@ -31,6 +31,8 @@
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/checksum.h>
#include <asm/tlbflush.h>
#include <asm/homecache.h>
#include <hv/hypervisor.h>
......@@ -222,11 +224,22 @@ struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order)
return alloc_pages_node(0, gfp_mask, order);
}
/*
* Address range in which pa=va mapping is set in setup_quasi_va_is_pa().
* For tilepro, PAGE_OFFSET is used since this is the largest possbile value
* for tilepro, while for tilegx, we limit it to entire middle level page
* table which we assume has been allocated and is undoubtedly large enough.
*/
#ifndef __tilegx__
#define QUASI_VA_IS_PA_ADDR_RANGE PAGE_OFFSET
#else
#define QUASI_VA_IS_PA_ADDR_RANGE PGDIR_SIZE
#endif
static void setup_quasi_va_is_pa(void)
{
HV_PTE *pgtable;
HV_PTE pte;
int i;
unsigned long i;
/*
* Flush our TLB to prevent conflicts between the previous contents
......@@ -234,16 +247,22 @@ static void setup_quasi_va_is_pa(void)
*/
local_flush_tlb_all();
/* setup VA is PA, at least up to PAGE_OFFSET */
pgtable = (HV_PTE *)current->mm->pgd;
/*
* setup VA is PA, at least up to QUASI_VA_IS_PA_ADDR_RANGE.
* Note here we assume that level-1 page table is defined by
* HPAGE_SIZE.
*/
pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE);
pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
for (i = 0; i < pgd_index(PAGE_OFFSET); i++) {
for (i = 0; i < (QUASI_VA_IS_PA_ADDR_RANGE >> HPAGE_SHIFT); i++) {
unsigned long vaddr = i << HPAGE_SHIFT;
pgd_t *pgd = pgd_offset(current->mm, vaddr);
pud_t *pud = pud_offset(pgd, vaddr);
pte_t *ptep = (pte_t *) pmd_offset(pud, vaddr);
unsigned long pfn = i << (HPAGE_SHIFT - PAGE_SHIFT);
if (pfn_valid(pfn))
__set_pte(&pgtable[i], pfn_pte(pfn, pte));
__set_pte(ptep, pfn_pte(pfn, pte));
}
}
......@@ -251,6 +270,7 @@ static void setup_quasi_va_is_pa(void)
void machine_kexec(struct kimage *image)
{
void *reboot_code_buffer;
pte_t *ptep;
void (*rnk)(unsigned long, void *, unsigned long)
__noreturn;
......@@ -266,8 +286,10 @@ void machine_kexec(struct kimage *image)
*/
homecache_change_page_home(image->control_code_page, 0,
smp_processor_id());
reboot_code_buffer = vmap(&image->control_code_page, 1, 0,
__pgprot(_PAGE_KERNEL | _PAGE_EXECUTABLE));
reboot_code_buffer = page_address(image->control_code_page);
BUG_ON(reboot_code_buffer == NULL);
ptep = virt_to_pte(NULL, (unsigned long)reboot_code_buffer);
__set_pte(ptep, pte_mkexec(*ptep));
memcpy(reboot_code_buffer, relocate_new_kernel,
relocate_new_kernel_size);
__flush_icache_range(
......
arch/tile/kernel/module.c
View file @ fa2af6e4
......@@ -159,7 +159,17 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
switch (ELF_R_TYPE(rel[i].r_info)) {
#define MUNGE(func) (*location = ((*location & ~func(-1)) | func(value)))
#ifdef __LITTLE_ENDIAN
# define MUNGE(func) \
(*location = ((*location & ~func(-1)) | func(value)))
#else
/*
* Instructions are always little-endian, so when we read them as data,
* we have to swap them around before and after modifying them.
*/
# define MUNGE(func) \
(*location = swab64((swab64(*location) & ~func(-1)) | func(value)))
#endif
#ifndef __tilegx__
case R_TILE_32:
......
arch/tile/kernel/proc.c
View file @ fa2af6e4
......@@ -22,6 +22,7 @@
#include <linux/proc_fs.h>
#include <linux/sysctl.h>
#include <linux/hardirq.h>
#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <asm/unaligned.h>
#include <asm/pgtable.h>
......
arch/tile/kernel/process.c
View file @ fa2af6e4
......@@ -128,10 +128,10 @@ void arch_release_thread_info(struct thread_info *info)
* Calling deactivate here just frees up the data structures.
* If the task we're freeing held the last reference to a
* hardwall fd, it would have been released prior to this point
* anyway via exit_files(), and "hardwall" would be NULL by now.
* anyway via exit_files(), and the hardwall_task.info pointers
* would be NULL by now.
*/
if (info->task->thread.hardwall)
hardwall_deactivate(info->task);
hardwall_deactivate_all(info->task);
#endif
if (step_state) {
......@@ -245,7 +245,8 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
#ifdef CONFIG_HARDWALL
/* New thread does not own any networks. */
p->thread.hardwall = NULL;
memset(&p->thread.hardwall[0], 0,
sizeof(struct hardwall_task) * HARDWALL_TYPES);
#endif
......@@ -515,12 +516,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
#ifdef CONFIG_HARDWALL
/* Enable or disable access to the network registers appropriately. */
if (prev->thread.hardwall != NULL) {
if (next->thread.hardwall == NULL)
restrict_network_mpls();
} else if (next->thread.hardwall != NULL) {
grant_network_mpls();
}
hardwall_switch_tasks(prev, next);
#endif
/*
......
arch/tile/kernel/relocate_kernel_64.S 0 → 100644
View file @ fa2af6e4
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* copy new kernel into place and then call hv_reexec
*
*/
#include <linux/linkage.h>
#include <arch/chip.h>
#include <asm/page.h>
#include <hv/hypervisor.h>
#undef RELOCATE_NEW_KERNEL_VERBOSE
STD_ENTRY(relocate_new_kernel)
move r30, r0 /* page list */
move r31, r1 /* address of page we are on */
move r32, r2 /* start address of new kernel */
shrui r1, r1, PAGE_SHIFT
addi r1, r1, 1
shli sp, r1, PAGE_SHIFT
addi sp, sp, -8
/* we now have a stack (whether we need one or not) */
moveli r40, hw2_last(hv_console_putc)
shl16insli r40, r40, hw1(hv_console_putc)
shl16insli r40, r40, hw0(hv_console_putc)
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'r'
jalr r40
moveli r0, '_'
jalr r40
moveli r0, 'n'
jalr r40
moveli r0, '_'
jalr r40
moveli r0, 'k'
jalr r40
moveli r0, '\n'
jalr r40
#endif
/*
* Throughout this code r30 is pointer to the element of page
* list we are working on.
*
* Normally we get to the next element of the page list by
* incrementing r30 by eight. The exception is if the element
* on the page list is an IND_INDIRECTION in which case we use
* the element with the low bits masked off as the new value
* of r30.
*
* To get this started, we need the value passed to us (which
* will always be an IND_INDIRECTION) in memory somewhere with
* r30 pointing at it. To do that, we push the value passed
* to us on the stack and make r30 point to it.
*/
st sp, r30
move r30, sp
addi sp, sp, -16
#if CHIP_HAS_CBOX_HOME_MAP()
/*
* On TILE-GX, we need to flush all tiles' caches, since we may
* have been doing hash-for-home caching there. Note that we
* must do this _after_ we're completely done modifying any memory
* other than our output buffer (which we know is locally cached).
* We want the caches to be fully clean when we do the reexec,
* because the hypervisor is going to do this flush again at that
* point, and we don't want that second flush to overwrite any memory.
*/
{
move r0, zero /* cache_pa */
moveli r1, hw2_last(HV_FLUSH_EVICT_L2)
}
{
shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2)
movei r2, -1 /* cache_cpumask; -1 means all client tiles */
}
{
shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) /* cache_control */
move r3, zero /* tlb_va */
}
{
move r4, zero /* tlb_length */
move r5, zero /* tlb_pgsize */
}
{
move r6, zero /* tlb_cpumask */
move r7, zero /* asids */
}
{
moveli r20, hw2_last(hv_flush_remote)
move r8, zero /* asidcount */
}
shl16insli r20, r20, hw1(hv_flush_remote)
shl16insli r20, r20, hw0(hv_flush_remote)
jalr r20
#endif
/* r33 is destination pointer, default to zero */
moveli r33, 0
.Lloop: ld r10, r30
andi r9, r10, 0xf /* low 4 bits tell us what type it is */
xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */
cmpeqi r0, r9, 0x1 /* IND_DESTINATION */
beqzt r0, .Ltry2
move r33, r10
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'd'
jalr r40
#endif
addi r30, r30, 8
j .Lloop
.Ltry2:
cmpeqi r0, r9, 0x2 /* IND_INDIRECTION */
beqzt r0, .Ltry4
move r30, r10
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'i'
jalr r40
#endif
j .Lloop
.Ltry4:
cmpeqi r0, r9, 0x4 /* IND_DONE */
beqzt r0, .Ltry8
mf
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'D'
jalr r40
moveli r0, '\n'
jalr r40
#endif
move r0, r32
moveli r41, hw2_last(hv_reexec)
shl16insli r41, r41, hw1(hv_reexec)
shl16insli r41, r41, hw0(hv_reexec)
jalr r41
/* we should not get here */
moveli r0, '?'
jalr r40
moveli r0, '\n'
jalr r40
j .Lhalt
.Ltry8: cmpeqi r0, r9, 0x8 /* IND_SOURCE */
beqz r0, .Lerr /* unknown type */
/* copy page at r10 to page at r33 */
move r11, r33
moveli r0, hw2_last(PAGE_SIZE)
shl16insli r0, r0, hw1(PAGE_SIZE)
shl16insli r0, r0, hw0(PAGE_SIZE)
add r33, r33, r0
/* copy word at r10 to word at r11 until r11 equals r33 */
/* We know page size must be multiple of 8, so we can unroll
* 8 times safely without any edge case checking.
*
* Issue a flush of the destination every 8 words to avoid
* incoherence when starting the new kernel. (Now this is
* just good paranoia because the hv_reexec call will also
* take care of this.)
*/
1:
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0 }
{ flush r11 ; addi r11, r11, 8 }
cmpeq r0, r33, r11
beqzt r0, 1b
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 's'
jalr r40
#endif
addi r30, r30, 8
j .Lloop
.Lerr: moveli r0, 'e'
jalr r40
moveli r0, 'r'
jalr r40
moveli r0, 'r'
jalr r40
moveli r0, '\n'
jalr r40
.Lhalt:
moveli r41, hw2_last(hv_halt)
shl16insli r41, r41, hw1(hv_halt)
shl16insli r41, r41, hw0(hv_halt)
jalr r41
STD_ENDPROC(relocate_new_kernel)
.section .rodata,"a"
.globl relocate_new_kernel_size
relocate_new_kernel_size:
.long .Lend_relocate_new_kernel - relocate_new_kernel
arch/tile/kernel/setup.c
View file @ fa2af6e4
......@@ -28,6 +28,7 @@
#include <linux/highmem.h>
#include <linux/smp.h>
#include <linux/timex.h>
#include <linux/hugetlb.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
......@@ -49,9 +50,6 @@ char chip_model[64] __write_once;
struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
/* We only create bootmem data on node 0. */
static bootmem_data_t __initdata node0_bdata;
/* Information on the NUMA nodes that we compute early */
unsigned long __cpuinitdata node_start_pfn[MAX_NUMNODES];
unsigned long __cpuinitdata node_end_pfn[MAX_NUMNODES];
......@@ -534,37 +532,96 @@ static void __init setup_memory(void)
#endif
}
static void __init setup_bootmem_allocator(void)
/*
* On 32-bit machines, we only put bootmem on the low controller,
* since PAs > 4GB can't be used in bootmem. In principle one could
* imagine, e.g., multiple 1 GB controllers all of which could support
* bootmem, but in practice using controllers this small isn't a
* particularly interesting scenario, so we just keep it simple and
* use only the first controller for bootmem on 32-bit machines.
*/
static inline int node_has_bootmem(int nid)
{
unsigned long bootmap_size, first_alloc_pfn, last_alloc_pfn;
#ifdef CONFIG_64BIT
return 1;
#else
return nid == 0;
#endif
}
/* Provide a node 0 bdata. */
NODE_DATA(0)->bdata = &node0_bdata;
static inline unsigned long alloc_bootmem_pfn(int nid,
unsigned long size,
unsigned long goal)
{
void *kva = __alloc_bootmem_node(NODE_DATA(nid), size,
PAGE_SIZE, goal);
unsigned long pfn = kaddr_to_pfn(kva);
BUG_ON(goal && PFN_PHYS(pfn) != goal);
return pfn;
}
#ifdef CONFIG_PCI
/* Don't let boot memory alias the PCI region. */
last_alloc_pfn = min(max_low_pfn, pci_reserve_start_pfn);
static void __init setup_bootmem_allocator_node(int i)
{
unsigned long start, end, mapsize, mapstart;
if (node_has_bootmem(i)) {
NODE_DATA(i)->bdata = &bootmem_node_data[i];
} else {
/* Share controller zero's bdata for now. */
NODE_DATA(i)->bdata = &bootmem_node_data[0];
return;
}
/* Skip up to after the bss in node 0. */
start = (i == 0) ? min_low_pfn : node_start_pfn[i];
/* Only lowmem, if we're a HIGHMEM build. */
#ifdef CONFIG_HIGHMEM
end = node_lowmem_end_pfn[i];
#else
last_alloc_pfn = max_low_pfn;
end = node_end_pfn[i];
#endif
/*
* Initialize the boot-time allocator (with low memory only):
* The first argument says where to put the bitmap, and the
* second says where the end of allocatable memory is.
*/
bootmap_size = init_bootmem(min_low_pfn, last_alloc_pfn);
/* No memory here. */
if (end == start)
return;
/* Figure out where the bootmem bitmap is located. */
mapsize = bootmem_bootmap_pages(end - start);
if (i == 0) {
/* Use some space right before the heap on node 0. */
mapstart = start;
start += mapsize;
} else {
/* Allocate bitmap on node 0 to avoid page table issues. */
mapstart = alloc_bootmem_pfn(0, PFN_PHYS(mapsize), 0);
}
/* Initialize a node. */
init_bootmem_node(NODE_DATA(i), mapstart, start, end);
/* Free all the space back into the allocator. */
free_bootmem(PFN_PHYS(start), PFN_PHYS(end - start));
#if defined(CONFIG_PCI)
/*
* Let the bootmem allocator use all the space we've given it
* except for its own bitmap.
* Throw away any memory aliased by the PCI region. FIXME: this
* is a temporary hack to work around bug 10502, and needs to be
* fixed properly.
*/
first_alloc_pfn = min_low_pfn + PFN_UP(bootmap_size);
if (first_alloc_pfn >= last_alloc_pfn)
early_panic("Not enough memory on controller 0 for bootmem\n");
if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start)
reserve_bootmem(PFN_PHYS(pci_reserve_start_pfn),
PFN_PHYS(pci_reserve_end_pfn -
pci_reserve_start_pfn),
BOOTMEM_EXCLUSIVE);
#endif
}
free_bootmem(PFN_PHYS(first_alloc_pfn),
PFN_PHYS(last_alloc_pfn - first_alloc_pfn));
static void __init setup_bootmem_allocator(void)
{
int i;
for (i = 0; i < MAX_NUMNODES; ++i)
setup_bootmem_allocator_node(i);
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
......@@ -595,14 +652,6 @@ static int __init percpu_size(void)
return size;
}
static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal)
{
void *kva = __alloc_bootmem(size, PAGE_SIZE, goal);
unsigned long pfn = kaddr_to_pfn(kva);
BUG_ON(goal && PFN_PHYS(pfn) != goal);
return pfn;
}
static void __init zone_sizes_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0 };
......@@ -640,21 +689,22 @@ static void __init zone_sizes_init(void)
* though, there'll be no lowmem, so we just alloc_bootmem
* the memmap. There will be no percpu memory either.
*/
if (__pfn_to_highbits(start) == 0) {
/* In low PAs, allocate via bootmem. */
if (i != 0 && cpu_isset(i, isolnodes)) {
node_memmap_pfn[i] =
alloc_bootmem_pfn(0, memmap_size, 0);
BUG_ON(node_percpu[i] != 0);
} else if (node_has_bootmem(start)) {
unsigned long goal = 0;
node_memmap_pfn[i] =
alloc_bootmem_pfn(memmap_size, goal);
alloc_bootmem_pfn(i, memmap_size, 0);
if (kdata_huge)
goal = PFN_PHYS(lowmem_end) - node_percpu[i];
if (node_percpu[i])
node_percpu_pfn[i] =
alloc_bootmem_pfn(node_percpu[i], goal);
} else if (cpu_isset(i, isolnodes)) {
node_memmap_pfn[i] = alloc_bootmem_pfn(memmap_size, 0);
BUG_ON(node_percpu[i] != 0);
alloc_bootmem_pfn(i, node_percpu[i],
goal);
} else {
/* In high PAs, just reserve some pages. */
/* In non-bootmem zones, just reserve some pages. */
node_memmap_pfn[i] = node_free_pfn[i];
node_free_pfn[i] += PFN_UP(memmap_size);
if (!kdata_huge) {
......@@ -678,16 +728,9 @@ static void __init zone_sizes_init(void)
zones_size[ZONE_NORMAL] = end - start;
#endif
/*
* Everyone shares node 0's bootmem allocator, but
* we use alloc_remap(), above, to put the actual
* struct page array on the individual controllers,
* which is most of the data that we actually care about.
* We can't place bootmem allocators on the other
* controllers since the bootmem allocator can only
* operate on 32-bit physical addresses.
*/
NODE_DATA(i)->bdata = NODE_DATA(0)->bdata;
/* Take zone metadata from controller 0 if we're isolnode. */
if (node_isset(i, isolnodes))
NODE_DATA(i)->bdata = &bootmem_node_data[0];
free_area_init_node(i, zones_size, start, NULL);
printk(KERN_DEBUG " Normal zone: %ld per-cpu pages\n",
......@@ -870,6 +913,22 @@ subsys_initcall(topology_init);
#endif /* CONFIG_NUMA */
/*
* Initialize hugepage support on this cpu. We do this on all cores
* early in boot: before argument parsing for the boot cpu, and after
* argument parsing but before the init functions run on the secondaries.
* So the values we set up here in the hypervisor may be overridden on
* the boot cpu as arguments are parsed.
*/
static __cpuinit void init_super_pages(void)
{
#ifdef CONFIG_HUGETLB_SUPER_PAGES
int i;
for (i = 0; i < HUGE_SHIFT_ENTRIES; ++i)
hv_set_pte_super_shift(i, huge_shift[i]);
#endif
}
/**
* setup_cpu() - Do all necessary per-cpu, tile-specific initialization.
* @boot: Is this the boot cpu?
......@@ -924,6 +983,8 @@ void __cpuinit setup_cpu(int boot)
/* Reset the network state on this cpu. */
reset_network_state();
#endif
init_super_pages();
}
#ifdef CONFIG_BLK_DEV_INITRD
......@@ -1412,13 +1473,13 @@ void __init setup_per_cpu_areas(void)
for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) {
/* Update the vmalloc mapping and page home. */
pte_t *ptep =
virt_to_pte(NULL, (unsigned long)ptr + i);
unsigned long addr = (unsigned long)ptr + i;
pte_t *ptep = virt_to_pte(NULL, addr);
pte_t pte = *ptep;
BUG_ON(pfn != pte_pfn(pte));
pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
pte = set_remote_cache_cpu(pte, cpu);
set_pte(ptep, pte);
set_pte_at(&init_mm, addr, ptep, pte);
/* Update the lowmem mapping for consistency. */
lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
......@@ -1431,7 +1492,7 @@ void __init setup_per_cpu_areas(void)
BUG_ON(pte_huge(*ptep));
}
BUG_ON(pfn != pte_pfn(*ptep));
set_pte(ptep, pte);
set_pte_at(&init_mm, lowmem_va, ptep, pte);
}
}
......
arch/tile/kernel/single_step.c
View file @ fa2af6e4
......@@ -172,9 +172,6 @@ static tile_bundle_bits rewrite_load_store_unaligned(
return (tilepro_bundle_bits) 0;
}
#ifndef __LITTLE_ENDIAN
# error We assume little-endian representation with copy_xx_user size 2 here
#endif
/* Handle unaligned load/store */
if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
unsigned short val_16;
......@@ -195,8 +192,19 @@ static tile_bundle_bits rewrite_load_store_unaligned(
state->update = 1;
}
} else {
unsigned short val_16;
val = (val_reg == TREG_ZERO) ? 0 : regs->regs[val_reg];
err = copy_to_user(addr, &val, size);
switch (size) {
case 2:
val_16 = val;
err = copy_to_user(addr, &val_16, sizeof(val_16));
break;
case 4:
err = copy_to_user(addr, &val, sizeof(val));
break;
default:
BUG();
}
}
if (err) {
......
arch/tile/kernel/smp.c
View file @ fa2af6e4
......@@ -203,7 +203,7 @@ void __init ipi_init(void)
if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0)
panic("Failed to initialize IPI for cpu %d\n", cpu);
offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
offset = PFN_PHYS(pte_pfn(pte));
ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte);
}
#endif
......
arch/tile/kernel/sys.c
View file @ fa2af6e4
......@@ -32,11 +32,17 @@
#include <asm/syscalls.h>
#include <asm/pgtable.h>
#include <asm/homecache.h>
#include <asm/cachectl.h>
#include <arch/chip.h>
SYSCALL_DEFINE0(flush_cache)
SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len,
unsigned long, flags)
{
homecache_evict(cpumask_of(smp_processor_id()));
if (flags & DCACHE)
homecache_evict(cpumask_of(smp_processor_id()));
if (flags & ICACHE)
flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(current->mm),
0, 0, 0, NULL, NULL, 0);
return 0;
}
......
arch/tile/kernel/sysfs.c
View file @ fa2af6e4
......@@ -93,6 +93,10 @@ HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM)
HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM)
HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV)
HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC)
HV_CONF_ATTR(cpumod_part, HV_CONFSTR_CPUMOD_PART_NUM)
HV_CONF_ATTR(cpumod_serial, HV_CONFSTR_CPUMOD_SERIAL_NUM)
HV_CONF_ATTR(cpumod_revision, HV_CONFSTR_CPUMOD_REV)
HV_CONF_ATTR(cpumod_description,HV_CONFSTR_CPUMOD_DESC)
HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL)
static struct attribute *board_attrs[] = {
......@@ -104,6 +108,10 @@ static struct attribute *board_attrs[] = {
&dev_attr_mezz_serial.attr,
&dev_attr_mezz_revision.attr,
&dev_attr_mezz_description.attr,
&dev_attr_cpumod_part.attr,
&dev_attr_cpumod_serial.attr,
&dev_attr_cpumod_revision.attr,
&dev_attr_cpumod_description.attr,
&dev_attr_switch_control.attr,
NULL
};
......
arch/tile/kernel/tlb.c
View file @ fa2af6e4
......@@ -15,6 +15,7 @@
#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/hugetlb.h>
#include <asm/tlbflush.h>
#include <asm/homecache.h>
#include <hv/hypervisor.h>
......@@ -49,25 +50,25 @@ void flush_tlb_current_task(void)
flush_tlb_mm(current->mm);
}
void flush_tlb_page_mm(const struct vm_area_struct *vma, struct mm_struct *mm,
void flush_tlb_page_mm(struct vm_area_struct *vma, struct mm_struct *mm,
unsigned long va)
{
unsigned long size = hv_page_size(vma);
unsigned long size = vma_kernel_pagesize(vma);
int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
flush_remote(0, cache, mm_cpumask(mm),
va, size, size, mm_cpumask(mm), NULL, 0);
}
void flush_tlb_page(const struct vm_area_struct *vma, unsigned long va)
void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
{
flush_tlb_page_mm(vma, vma->vm_mm, va);
}
EXPORT_SYMBOL(flush_tlb_page);
void flush_tlb_range(const struct vm_area_struct *vma,
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
unsigned long size = hv_page_size(vma);
unsigned long size = vma_kernel_pagesize(vma);
struct mm_struct *mm = vma->vm_mm;
int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
flush_remote(0, cache, mm_cpumask(mm), start, end - start, size,
......
arch/tile/kernel/traps.c
View file @ fa2af6e4
......@@ -195,6 +195,25 @@ static int special_ill(bundle_bits bundle, int *sigp, int *codep)
return 1;
}
static const char *const int_name[] = {
[INT_MEM_ERROR] = "Memory error",
[INT_ILL] = "Illegal instruction",
[INT_GPV] = "General protection violation",
[INT_UDN_ACCESS] = "UDN access",
[INT_IDN_ACCESS] = "IDN access",
#if CHIP_HAS_SN()
[INT_SN_ACCESS] = "SN access",
#endif
[INT_SWINT_3] = "Software interrupt 3",
[INT_SWINT_2] = "Software interrupt 2",
[INT_SWINT_0] = "Software interrupt 0",
[INT_UNALIGN_DATA] = "Unaligned data",
[INT_DOUBLE_FAULT] = "Double fault",
#ifdef __tilegx__
[INT_ILL_TRANS] = "Illegal virtual address",
#endif
};
void __kprobes do_trap(struct pt_regs *regs, int fault_num,
unsigned long reason)
{
......@@ -211,10 +230,17 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
* current process and hope for the best.
*/
if (!user_mode(regs)) {
const char *name;
if (fixup_exception(regs)) /* only UNALIGN_DATA in practice */
return;
pr_alert("Kernel took bad trap %d at PC %#lx\n",
fault_num, regs->pc);
if (fault_num >= 0 &&
fault_num < sizeof(int_name)/sizeof(int_name[0]) &&
int_name[fault_num] != NULL)
name = int_name[fault_num];
else
name = "Unknown interrupt";
pr_alert("Kernel took bad trap %d (%s) at PC %#lx\n",
fault_num, name, regs->pc);
if (fault_num == INT_GPV)
pr_alert("GPV_REASON is %#lx\n", reason);
show_regs(regs);
......
arch/tile/lib/atomic_32.c
View file @ fa2af6e4
......@@ -18,7 +18,6 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/atomic.h>
#include <asm/futex.h>
#include <arch/chip.h>
/* See <asm/atomic_32.h> */
......@@ -50,7 +49,7 @@ int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss;
#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
static inline int *__atomic_hashed_lock(volatile void *v)
int *__atomic_hashed_lock(volatile void *v)
{
/* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */
#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
......@@ -191,47 +190,6 @@ u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
EXPORT_SYMBOL(_atomic64_cmpxchg);
static inline int *__futex_setup(int __user *v)
{
/*
* Issue a prefetch to the counter to bring it into cache.
* As for __atomic_setup, but we can't do a read into the L1
* since it might fault; instead we do a prefetch into the L2.
*/
__insn_prefetch(v);
return __atomic_hashed_lock((int __force *)v);
}
struct __get_user futex_set(u32 __user *v, int i)
{
return __atomic_xchg((int __force *)v, __futex_setup(v), i);
}
struct __get_user futex_add(u32 __user *v, int n)
{
return __atomic_xchg_add((int __force *)v, __futex_setup(v), n);
}
struct __get_user futex_or(u32 __user *v, int n)
{
return __atomic_or((int __force *)v, __futex_setup(v), n);
}
struct __get_user futex_andn(u32 __user *v, int n)
{
return __atomic_andn((int __force *)v, __futex_setup(v), n);
}
struct __get_user futex_xor(u32 __user *v, int n)
{
return __atomic_xor((int __force *)v, __futex_setup(v), n);
}
struct __get_user futex_cmpxchg(u32 __user *v, int o, int n)
{
return __atomic_cmpxchg((int __force *)v, __futex_setup(v), o, n);
}
/*
* If any of the atomic or futex routines hit a bad address (not in
* the page tables at kernel PL) this routine is called. The futex
......@@ -323,7 +281,4 @@ void __init __init_atomic_per_cpu(void)
BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
/* The futex code makes this assumption, so we validate it here. */
BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
}
arch/tile/lib/exports.c
View file @ fa2af6e4
......@@ -18,14 +18,6 @@
/* arch/tile/lib/usercopy.S */
#include <linux/uaccess.h>
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
EXPORT_SYMBOL(__get_user_8);
EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
EXPORT_SYMBOL(strnlen_user_asm);
EXPORT_SYMBOL(strncpy_from_user_asm);
EXPORT_SYMBOL(clear_user_asm);
......
arch/tile/lib/memchr_64.c
View file @ fa2af6e4
......@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
#include "string-endian.h"
void *memchr(const void *s, int c, size_t n)
{
......@@ -39,11 +40,8 @@ void *memchr(const void *s, int c, size_t n)
/* Read the first word, but munge it so that bytes before the array
* will not match goal.
*
* Note that this shift count expression works because we know
* shift counts are taken mod 64.
*/
before_mask = (1ULL << (s_int << 3)) - 1;
before_mask = MASK(s_int);
v = (*p | before_mask) ^ (goal & before_mask);
/* Compute the address of the last byte. */
......@@ -65,7 +63,7 @@ void *memchr(const void *s, int c, size_t n)
/* We found a match, but it might be in a byte past the end
* of the array.
*/
ret = ((char *)p) + (__insn_ctz(bits) >> 3);
ret = ((char *)p) + (CFZ(bits) >> 3);
return (ret <= last_byte_ptr) ? ret : NULL;
}
EXPORT_SYMBOL(memchr);
arch/tile/lib/memcpy_64.c
View file @ fa2af6e4
......@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
#define __memcpy memcpy
/* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */
/* Must be 8 bytes in size. */
......@@ -188,6 +187,7 @@ int USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n)
/* n != 0 if we get here. Write out any trailing bytes. */
dst1 = (char *)dst8;
#ifndef __BIG_ENDIAN__
if (n & 4) {
ST4((uint32_t *)dst1, final);
dst1 += 4;
......@@ -202,11 +202,30 @@ int USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n)
}
if (n)
ST1((uint8_t *)dst1, final);
#else
if (n & 4) {
ST4((uint32_t *)dst1, final >> 32);
dst1 += 4;
}
else
{
final >>= 32;
}
if (n & 2) {
ST2((uint16_t *)dst1, final >> 16);
dst1 += 2;
}
else
{
final >>= 16;
}
if (n & 1)
ST1((uint8_t *)dst1, final >> 8);
#endif
return RETVAL;
}
#ifdef USERCOPY_FUNC
#undef ST1
#undef ST2
......
arch/tile/lib/memcpy_tile64.c
View file @ fa2af6e4
......@@ -160,7 +160,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
break;
if (get_remote_cache_cpu(src_pte) == smp_processor_id())
break;
src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
src_page = pfn_to_page(pte_pfn(src_pte));
get_page(src_page);
if (pte_val(src_pte) != pte_val(*src_ptep)) {
put_page(src_page);
......@@ -168,7 +168,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
}
if (pte_huge(src_pte)) {
/* Adjust the PTE to correspond to a small page */
int pfn = hv_pte_get_pfn(src_pte);
int pfn = pte_pfn(src_pte);
pfn += (((unsigned long)source & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
src_pte = pfn_pte(pfn, src_pte);
......@@ -188,7 +188,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
put_page(src_page);
break;
}
dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
dst_page = pfn_to_page(pte_pfn(dst_pte));
if (dst_page == src_page) {
/*
* Source and dest are on the same page; this
......@@ -206,7 +206,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
}
if (pte_huge(dst_pte)) {
/* Adjust the PTE to correspond to a small page */
int pfn = hv_pte_get_pfn(dst_pte);
int pfn = pte_pfn(dst_pte);
pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
dst_pte = pfn_pte(pfn, dst_pte);
......
arch/tile/lib/strchr_64.c
View file @ fa2af6e4
......@@ -15,8 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
#undef strchr
#include "string-endian.h"
char *strchr(const char *s, int c)
{
......@@ -33,13 +32,9 @@ char *strchr(const char *s, int c)
* match neither zero nor goal (we make sure the high bit of each
* byte is 1, and the low 7 bits are all the opposite of the goal
* byte).
*
* Note that this shift count expression works because we know shift
* counts are taken mod 64.
*/
const uint64_t before_mask = (1ULL << (s_int << 3)) - 1;
uint64_t v = (*p | before_mask) ^
(goal & __insn_v1shrsi(before_mask, 1));
const uint64_t before_mask = MASK(s_int);
uint64_t v = (*p | before_mask) ^ (goal & __insn_v1shrui(before_mask, 1));
uint64_t zero_matches, goal_matches;
while (1) {
......@@ -55,8 +50,8 @@ char *strchr(const char *s, int c)
v = *++p;
}
z = __insn_ctz(zero_matches);
g = __insn_ctz(goal_matches);
z = CFZ(zero_matches);
g = CFZ(goal_matches);
/* If we found c before '\0' we got a match. Note that if c == '\0'
* then g == z, and we correctly return the address of the '\0'
......
arch/tile/lib/string-endian.h 0 → 100644
View file @ fa2af6e4
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* Provide a mask based on the pointer alignment that
* sets up non-zero bytes before the beginning of the string.
* The MASK expression works because shift counts are taken mod 64.
* Also, specify how to count "first" and "last" bits
* when the bits have been read as a word.
*/
#include <asm/byteorder.h>
#ifdef __LITTLE_ENDIAN
#define MASK(x) (__insn_shl(1ULL, (x << 3)) - 1)
#define NULMASK(x) ((2ULL << x) - 1)
#define CFZ(x) __insn_ctz(x)
#define REVCZ(x) __insn_clz(x)
#else
#define MASK(x) (__insn_shl(-2LL, ((-x << 3) - 1)))
#define NULMASK(x) (-2LL << (63 - x))
#define CFZ(x) __insn_clz(x)
#define REVCZ(x) __insn_ctz(x)
#endif
arch/tile/lib/strlen_64.c
View file @ fa2af6e4
......@@ -15,8 +15,7 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
#undef strlen
#include "string-endian.h"
size_t strlen(const char *s)
{
......@@ -24,15 +23,13 @@ size_t strlen(const char *s)
const uintptr_t s_int = (uintptr_t) s;
const uint64_t *p = (const uint64_t *)(s_int & -8);
/* Read the first word, but force bytes before the string to be nonzero.
* This expression works because we know shift counts are taken mod 64.
*/
uint64_t v = *p | ((1ULL << (s_int << 3)) - 1);
/* Read and MASK the first word. */
uint64_t v = *p | MASK(s_int);
uint64_t bits;
while ((bits = __insn_v1cmpeqi(v, 0)) == 0)
v = *++p;
return ((const char *)p) + (__insn_ctz(bits) >> 3) - s;
return ((const char *)p) + (CFZ(bits) >> 3) - s;
}
EXPORT_SYMBOL(strlen);
arch/tile/lib/usercopy_32.S
View file @ fa2af6e4
......@@ -19,82 +19,6 @@
/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
.pushsection .fixup,"ax"
get_user_fault:
{ move r0, zero; move r1, zero }
{ movei r2, -EFAULT; jrp lr }
ENDPROC(get_user_fault)
put_user_fault:
{ movei r0, -EFAULT; jrp lr }
ENDPROC(put_user_fault)
.popsection
/*
* __get_user_N functions take a pointer in r0, and return 0 in r2
* on success, with the value in r0; or else -EFAULT in r2.
*/
#define __get_user_N(bytes, LOAD) \
STD_ENTRY(__get_user_##bytes); \
1: { LOAD r0, r0; move r1, zero; move r2, zero }; \
jrp lr; \
STD_ENDPROC(__get_user_##bytes); \
.pushsection __ex_table,"a"; \
.word 1b, get_user_fault; \
.popsection
__get_user_N(1, lb_u)
__get_user_N(2, lh_u)
__get_user_N(4, lw)
/*
* __get_user_8 takes a pointer in r0, and returns 0 in r2
* on success, with the value in r0/r1; or else -EFAULT in r2.
*/
STD_ENTRY(__get_user_8);
1: { lw r0, r0; addi r1, r0, 4 };
2: { lw r1, r1; move r2, zero };
jrp lr;
STD_ENDPROC(__get_user_8);
.pushsection __ex_table,"a";
.word 1b, get_user_fault;
.word 2b, get_user_fault;
.popsection
/*
* __put_user_N functions take a value in r0 and a pointer in r1,
* and return 0 in r0 on success or -EFAULT on failure.
*/
#define __put_user_N(bytes, STORE) \
STD_ENTRY(__put_user_##bytes); \
1: { STORE r1, r0; move r0, zero }; \
jrp lr; \
STD_ENDPROC(__put_user_##bytes); \
.pushsection __ex_table,"a"; \
.word 1b, put_user_fault; \
.popsection
__put_user_N(1, sb)
__put_user_N(2, sh)
__put_user_N(4, sw)
/*
* __put_user_8 takes a value in r0/r1 and a pointer in r2,
* and returns 0 in r0 on success or -EFAULT on failure.
*/
STD_ENTRY(__put_user_8)
1: { sw r2, r0; addi r2, r2, 4 }
2: { sw r2, r1; move r0, zero }
jrp lr
STD_ENDPROC(__put_user_8)
.pushsection __ex_table,"a"
.word 1b, put_user_fault
.word 2b, put_user_fault
.popsection
/*
* strnlen_user_asm takes the pointer in r0, and the length bound in r1.
* It returns the length, including the terminating NUL, or zero on exception.
......
arch/tile/lib/usercopy_64.S
View file @ fa2af6e4
......@@ -19,55 +19,6 @@
/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
.pushsection .fixup,"ax"
get_user_fault:
{ movei r1, -EFAULT; move r0, zero }
jrp lr
ENDPROC(get_user_fault)
put_user_fault:
{ movei r0, -EFAULT; jrp lr }
ENDPROC(put_user_fault)
.popsection
/*
* __get_user_N functions take a pointer in r0, and return 0 in r1
* on success, with the value in r0; or else -EFAULT in r1.
*/
#define __get_user_N(bytes, LOAD) \
STD_ENTRY(__get_user_##bytes); \
1: { LOAD r0, r0; move r1, zero }; \
jrp lr; \
STD_ENDPROC(__get_user_##bytes); \
.pushsection __ex_table,"a"; \
.quad 1b, get_user_fault; \
.popsection
__get_user_N(1, ld1u)
__get_user_N(2, ld2u)
__get_user_N(4, ld4u)
__get_user_N(8, ld)
/*
* __put_user_N functions take a value in r0 and a pointer in r1,
* and return 0 in r0 on success or -EFAULT on failure.
*/
#define __put_user_N(bytes, STORE) \
STD_ENTRY(__put_user_##bytes); \
1: { STORE r1, r0; move r0, zero }; \
jrp lr; \
STD_ENDPROC(__put_user_##bytes); \
.pushsection __ex_table,"a"; \
.quad 1b, put_user_fault; \
.popsection
__put_user_N(1, st1)
__put_user_N(2, st2)
__put_user_N(4, st4)
__put_user_N(8, st)
/*
* strnlen_user_asm takes the pointer in r0, and the length bound in r1.
* It returns the length, including the terminating NUL, or zero on exception.
......
arch/tile/mm/fault.c
View file @ fa2af6e4
......@@ -187,7 +187,7 @@ static pgd_t *get_current_pgd(void)
HV_Context ctx = hv_inquire_context();
unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT;
struct page *pgd_page = pfn_to_page(pgd_pfn);
BUG_ON(PageHighMem(pgd_page)); /* oops, HIGHPTE? */
BUG_ON(PageHighMem(pgd_page));
return (pgd_t *) __va(ctx.page_table);
}
......@@ -273,11 +273,15 @@ static int handle_page_fault(struct pt_regs *regs,
int si_code;
int is_kernel_mode;
pgd_t *pgd;
unsigned int flags;
/* on TILE, protection faults are always writes */
if (!is_page_fault)
write = 1;
flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
(write ? FAULT_FLAG_WRITE : 0));
is_kernel_mode = (EX1_PL(regs->ex1) != USER_PL);
tsk = validate_current();
......@@ -382,6 +386,8 @@ static int handle_page_fault(struct pt_regs *regs,
vma = NULL; /* happy compiler */
goto bad_area_nosemaphore;
}
retry:
down_read(&mm->mmap_sem);
}
......@@ -429,7 +435,11 @@ static int handle_page_fault(struct pt_regs *regs,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, write);
fault = handle_mm_fault(mm, vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return 0;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
......@@ -437,10 +447,22 @@ static int handle_page_fault(struct pt_regs *regs,
goto do_sigbus;
BUG();
}
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
/*
......
arch/tile/mm/homecache.c
View file @ fa2af6e4
......@@ -30,6 +30,7 @@
#include <linux/cache.h>
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/hugetlb.h>
#include <asm/page.h>
#include <asm/sections.h>
......
arch/tile/mm/hugetlbpage.c
View file @ fa2af6e4
This diff is collapsed.
arch/tile/mm/init.c
View file @ fa2af6e4
This diff is collapsed.
arch/tile/mm/migrate.h
View file @ fa2af6e4
......@@ -24,6 +24,9 @@
/*
* This function is used as a helper when setting up the initial
* page table (swapper_pg_dir).
*
* You must mask ALL interrupts prior to invoking this code, since
* you can't legally touch the stack during the cache flush.
*/
extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
HV_ASID asid,
......@@ -39,6 +42,9 @@ extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
*
* Note that any non-NULL pointers must not point to the page that
* is handled by the stack_pte itself.
*
* You must mask ALL interrupts prior to invoking this code, since
* you can't legally touch the stack during the cache flush.
*/
extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
size_t length, pte_t *stack_ptep,
......
arch/tile/mm/migrate_32.S
View file @ fa2af6e4
This diff is collapsed.
arch/tile/mm/migrate_64.S
View file @ fa2af6e4
This diff is collapsed.
arch/tile/mm/pgtable.c
View file @ fa2af6e4
This diff is collapsed.
include/asm-generic/pgtable.h
View file @ fa2af6e4
......@@ -158,9 +158,8 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm,
#endif
#ifndef __HAVE_ARCH_PMDP_SPLITTING_FLUSH
extern pmd_t pmdp_splitting_flush(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp);
extern void pmdp_splitting_flush(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp);
#endif
#ifndef __HAVE_ARCH_PTE_SAME
......
include/linux/hugetlb.h
View file @ fa2af6e4
This diff is collapsed.
mm/hugetlb.c
View file @ fa2af6e4
This diff is collapsed.
mm/pgtable-generic.c
View file @ fa2af6e4
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7