Commit fa56fe4c authored by Richard Leitner's avatar Richard Leitner Committed by Greg Kroah-Hartman

doc: dt-bindings: usb251xb: mark reg as required

Mark the reg property as required and furthermore fix some typos and
spellings in the documentation.
Signed-off-by: default avatarRichard Leitner <richard.leitner@skidata.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7f7d8ba3
......@@ -7,18 +7,18 @@ Required properties :
- compatible : Should be "microchip,usb251xb" or one of the specific types:
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- hub-reset-gpios : Should specify the gpio for hub reset
- reset-gpios : Should specify the gpio for hub reset
- reg : I2C address on the selected bus (default is <0x2C>)
Optional properties :
- reg : I2C address on the selected bus (default is <0x2C>)
- skip-config : Skip Hub configuration, but only send the USB-Attach command
- vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
- product-id : USB Product ID of the hub (16 bit, default depends on type)
- device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
- language-id : USB Language ID (16 bit, default is 0x0000)
- manufacturer : USB Manufacturer string (max 31 characters long)
- product : USB Product string (max 31 characters long)
- serial : USB Serial string (max 31 characters long)
- vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
- product-id : Set USB Product ID of the hub (16 bit, default depends on type)
- device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
- language-id : Set USB Language ID (16 bit, default is 0x0000)
- manufacturer : Set USB Manufacturer string (max 31 characters long)
- product : Set USB Product string (max 31 characters long)
- serial : Set USB Serial string (max 31 characters long)
- {bus,self}-powered : selects between self- and bus-powered operation (default
is self-powered)
- disable-hi-speed : disable USB Hi-Speed support
......@@ -34,7 +34,7 @@ Optional properties :
- oc-delay-us : Delay time (in microseconds) for filtering the over-current
sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
an invalid value is given, the default is used instead.
- compound-device : indicated the hub is part of a compound device
- compound-device : indicate the hub is part of a compound device
- port-mapping-mode : enable port mapping mode
- string-support : enable string descriptor support (required for manufacturer,
product and serial string configuration)
......@@ -49,7 +49,8 @@ Optional properties :
Examples:
usb2512b@2c {
compatible = "microchip,usb2512b";
hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
reg = <0x2c>;
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
usb2514b@2c {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment