Commit fabfc74f authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Bjorn Andersson

arm64: dts: qcom: sm8350: move DPU opp-table to its node

The Qualcomm MDSS bindings expect that DPU opp-table is defined within
DPU node:

  sm8350-hdk.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('opp-table' was unexpected)
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231107103540.27353-3-krzysztof.kozlowski@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 7613e707
......@@ -2452,35 +2452,6 @@ mdss: display-subsystem@ae00000 {
#size-cells = <2>;
ranges;
dpu_opp_table: opp-table {
compatible = "operating-points-v2";
/* TODO: opp-200000000 should work with
* &rpmhpd_opp_low_svs, but one some of
* sm8350_hdk boards reboot using this
* opp.
*/
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm8350-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
......@@ -2509,6 +2480,35 @@ mdss_mdp: display-controller@ae01000 {
interrupt-parent = <&mdss>;
interrupts = <0>;
dpu_opp_table: opp-table {
compatible = "operating-points-v2";
/* TODO: opp-200000000 should work with
* &rpmhpd_opp_low_svs, but one some of
* sm8350_hdk boards reboot using this
* opp.
*/
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment