Commit fb1bf8cd authored by Eric Miao's avatar Eric Miao

[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()

This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent e1aed7ca
......@@ -40,6 +40,25 @@ void pxa27x_clear_otgph(void)
}
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
GPIO95_AC97_nRESET,
GPIO95_GPIO,
GPIO113_AC97_nRESET,
GPIO113_GPIO,
};
void pxa27x_assert_ac97reset(int reset_gpio, int on)
{
if (reset_gpio == 113)
pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
&ac97_reset_config[1], 1);
if (reset_gpio == 95)
pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
&ac97_reset_config[3], 1);
}
EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
......
......@@ -32,6 +32,8 @@ static struct clk *ac97_clk;
static struct clk *ac97conf_clk;
static int reset_gpio;
extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
/*
* Beware PXA27x bugs:
*
......@@ -42,45 +44,6 @@ static int reset_gpio;
* 1 jiffy timeout if interrupt never comes).
*/
enum {
RESETGPIO_FORCE_HIGH,
RESETGPIO_FORCE_LOW,
RESETGPIO_NORMAL_ALTFUNC
};
/**
* set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
* @mode: chosen action
*
* As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
* must be done to insure proper work of AC97 reset line. This function
* computes the correct gpio_mode for further use by reset functions, and
* applied the change through pxa_gpio_mode.
*/
static void set_resetgpio_mode(int resetgpio_action)
{
int mode = 0;
if (reset_gpio)
switch (resetgpio_action) {
case RESETGPIO_NORMAL_ALTFUNC:
if (reset_gpio == 113)
mode = 113 | GPIO_ALT_FN_2_OUT;
if (reset_gpio == 95)
mode = 95 | GPIO_ALT_FN_1_OUT;
break;
case RESETGPIO_FORCE_LOW:
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
break;
case RESETGPIO_FORCE_HIGH:
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
break;
};
if (mode)
pxa_gpio_mode(mode);
}
unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
unsigned short val = -1;
......@@ -174,12 +137,11 @@ static inline void pxa_ac97_warm_pxa27x(void)
{
gsr_bits = 0;
/* warm reset broken on Bulverde,
so manually keep AC97 reset high */
set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
/* warm reset broken on Bulverde, so manually keep AC97 reset high */
pxa27x_assert_ac97reset(reset_gpio, 1);
udelay(10);
GCR |= GCR_WARM_RST;
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
pxa27x_assert_ac97reset(reset_gpio, 0);
udelay(500);
}
......@@ -385,7 +347,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
if (cpu_is_pxa27x()) {
/* Use GPIO 113 as AC97 Reset on Bulverde */
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
pxa27x_assert_ac97reset(reset_gpio, 0);
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
if (IS_ERR(ac97conf_clk)) {
ret = PTR_ERR(ac97conf_clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment