Commit fb35f1ce authored by Russell King's avatar Russell King
parents 8954bb0d cdb4acc0
......@@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info {
* here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
int gpio_vbus; /* high == vbus present */
bool gpio_pullup_inverted;
u16 gpio_pullup; /* high == pullup activated */
int gpio_pullup; /* high == pullup activated */
};
......@@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
};
/* Board I2C devices. */
static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
static struct i2c_board_info mioa701_i2c_devices[] = {
{
I2C_BOARD_INFO("mt9m111", 0x5d),
},
......
......@@ -3,8 +3,9 @@
*
* Support for the Zipit Z2 Handheld device.
*
* Author: Ken McGuire
* Created: Jan 25, 2009
* Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
*
* Based on research and code by: Ken McGuire
* Based on mainstone.c as modified for the Zipit Z2.
*
* This program is free software; you can redistribute it and/or modify
......@@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = {
{
.name = "U-Boot Bootloader",
.offset = 0x0,
.size = 0x20000,
},
{
.name = "Linux Kernel",
.offset = 0x20000,
.size = 0x220000,
},
{
.name = "Filesystem",
.offset = 0x240000,
.size = 0x5b0000,
},
{
.size = 0x40000,
}, {
.name = "U-Boot Environment",
.offset = 0x7f0000,
.offset = 0x40000,
.size = 0x60000,
}, {
.name = "Flash",
.offset = 0x60000,
.size = MTDPART_SIZ_FULL,
},
};
......
......@@ -2,8 +2,9 @@
# Makefile for code common across different PXA processor families
#
obj-y := dma.o pmu.o
obj-y := dma.o
obj-$(CONFIG_ARCH_PXA) += pmu.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
......
......@@ -9,19 +9,13 @@
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/i2c.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#include <linux/z2_battery.h>
#define Z2_DEFAULT_NAME "Z2"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment