powerpc/powernv: Create bus sensitive PEs

Basically, there're 2 types of PCI bus sensitive PEs: (A) The PE
includes single PCI bus. (B) The PE includes the PCI bus and all
the subordinate PCI buses. At present, we'd like to put PCI bus
originated by PCI-e link to form PE that contains single PCI bus,
and the PCIe-to-PCI bridge will form the 2nd type of PE. We don't
figure out to detect PLX bridge yet. Once we can detect PLX bridge
some day, we have to put PCI buses originated from the downstream
port of PLX bridge to the 2nd type of PE.

The patch changes the original implementation for a little bit
to support 2 types of PCI bus sensitive PEs described as above.
Also, the function used to retrieve the corresponding PE according
to the given PCI device has been changed based on that because each
PCI device should trace the directly associated PE.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Richard Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -547,7 +547,7 @@ static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
  * but in the meantime, we need to protect them to avoid warnings
  */
 #ifdef CONFIG_PCI_MSI
-static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
@@ -559,19 +559,6 @@ static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
 		return NULL;
 	return &phb->ioda.pe_array[pdn->pe_number];
 }
-
-static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
-{
-	struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
-
-	while (!pe && dev->bus->self) {
-		dev = dev->bus->self;
-		pe = __pnv_ioda_get_one_pe(dev);
-		if (pe)
-			pe = pe->bus_pe;
-	}
-	return pe;
-}
 #endif /* CONFIG_PCI_MSI */
 
 static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
@@ -588,7 +575,11 @@ static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
 		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
 		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
 		parent = pe->pbus->self;
-		count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		else
+			count = 1;
+
 		switch(count) {
 		case  1: bcomp = OpalPciBusAll;		break;
 		case  2: bcomp = OpalPciBus7Bits;	break;
@@ -698,6 +689,7 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
 	return 10;
 }
 
+#if 0
 static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -766,6 +758,7 @@ static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 
 	return pe;
 }
+#endif /* Useful for SRIOV case */
 
 static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 {
@@ -783,34 +776,33 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 		pdn->pcidev = dev;
 		pdn->pe_number = pe->pe_number;
 		pe->dma_weight += pnv_ioda_dma_weight(dev);
-		if (dev->subordinate)
+		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
 			pnv_ioda_setup_same_PE(dev->subordinate, pe);
 	}
 }
 
-static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
-					    struct pnv_ioda_pe *ppe)
+/*
+ * There're 2 types of PCI bus sensitive PEs: One that is compromised of
+ * single PCI bus. Another one that contains the primary PCI bus and its
+ * subordinate PCI devices and buses. The second type of PE is normally
+ * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
+ */
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct pnv_phb *phb = hose->private_data;
-	struct pci_bus *bus = dev->subordinate;
 	struct pnv_ioda_pe *pe;
 	int pe_num;
 
-	if (!bus) {
-		pr_warning("%s: Bridge without a subordinate bus !\n",
-			   pci_name(dev));
-		return;
-	}
 	pe_num = pnv_ioda_alloc_pe(phb);
 	if (pe_num == IODA_INVALID_PE) {
-		pr_warning("%s: Not enough PE# available, disabling bus\n",
-			   pci_name(dev));
+		pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n",
+			__func__, pci_domain_nr(bus), bus->number);
 		return;
 	}
 
 	pe = &phb->ioda.pe_array[pe_num];
-	ppe->bus_pe = pe;
+	pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
 	pe->pbus = bus;
 	pe->pdev = NULL;
 	pe->tce32_seg = -1;
@@ -818,8 +810,12 @@ static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
 	pe->rid = bus->busn_res.start << 8;
 	pe->dma_weight = 0;
 
-	pe_info(pe, "Secondary busses %pR associated with PE\n",
-		&bus->busn_res);
+	if (all)
+		pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
+			bus->busn_res.start, bus->busn_res.end, pe_num);
+	else
+		pe_info(pe, "Secondary bus %d associated with PE#%d\n",
+			bus->busn_res.start, pe_num);
 
 	if (pnv_ioda_configure_pe(phb, pe)) {
 		/* XXX What do we do here ? */
@@ -847,17 +843,33 @@ static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
 static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
-	struct pnv_ioda_pe *pe;
+
+	pnv_ioda_setup_bus_PE(bus, 0);
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		pe = pnv_ioda_setup_dev_PE(dev);
-		if (pe == NULL)
-			continue;
-		/* Leaving the PCIe domain ... single PE# */
-		if (pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE)
-			pnv_ioda_setup_bus_PE(dev, pe);
-		else if (dev->subordinate)
-			pnv_ioda_setup_PEs(dev->subordinate);
+		if (dev->subordinate) {
+			if (pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE)
+				pnv_ioda_setup_bus_PE(dev->subordinate, 1);
+			else
+				pnv_ioda_setup_PEs(dev->subordinate);
+		}
+	}
+}
+
+/*
+ * Configure PEs so that the downstream PCI buses and devices
+ * could have their associated PE#. Unfortunately, we didn't
+ * figure out the way to identify the PLX bridge yet. So we
+ * simply put the PCI bus and the subordinate behind the root
+ * port to PE# here. The game rule here is expected to be changed
+ * as soon as we can detected PLX bridge correctly.
+ */
+static void __devinit pnv_pci_ioda_setup_PEs(void)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		pnv_ioda_setup_PEs(hose->bus);
 	}
 }
 
@@ -1138,6 +1150,11 @@ static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
 	}
 }
 
+static void __devinit pnv_pci_ioda_fixup(void)
+{
+	pnv_pci_ioda_setup_PEs();
+}
+
 /*
  * Returns the alignment for I/O or memory windows for P2P
  * bridges. That actually depends on how PEs are segmented.
@@ -1342,6 +1359,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
 	 * ourselves here
 	 */
 	ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
 	ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
 	pci_add_flags(PCI_PROBE_ONLY | PCI_REASSIGN_ALL_RSRC);