Commit fbe4b356 authored by Daniel Lezcano's avatar Daniel Lezcano

clocksource/drivers/orion: Convert init function to return error

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
parent 4e2afeb9
......@@ -104,25 +104,36 @@ static struct irqaction orion_clkevt_irq = {
.handler = orion_clkevt_irq_handler,
};
static void __init orion_timer_init(struct device_node *np)
static int __init orion_timer_init(struct device_node *np)
{
struct clk *clk;
int irq;
int irq, ret;
/* timer registers are shared with watchdog timer */
timer_base = of_iomap(np, 0);
if (!timer_base)
panic("%s: unable to map resource\n", np->name);
if (!timer_base) {
pr_err("%s: unable to map resource\n", np->name);
return -ENXIO;
}
clk = of_clk_get(np, 0);
if (IS_ERR(clk))
panic("%s: unable to get clk\n", np->name);
clk_prepare_enable(clk);
if (IS_ERR(clk)) {
pr_err("%s: unable to get clk\n", np->name);
return PTR_ERR(clk);
}
ret = clk_prepare_enable(clk);
if (ret) {
pr_err("Failed to prepare clock");
return ret;
}
/* we are only interested in timer1 irq */
irq = irq_of_parse_and_map(np, 1);
if (irq <= 0)
panic("%s: unable to parse timer1 irq\n", np->name);
if (irq <= 0) {
pr_err("%s: unable to parse timer1 irq\n", np->name);
return -EINVAL;
}
/* setup timer0 as free-running clocksource */
writel(~0, timer_base + TIMER0_VAL);
......@@ -130,19 +141,30 @@ static void __init orion_timer_init(struct device_node *np)
atomic_io_modify(timer_base + TIMER_CTRL,
TIMER0_RELOAD_EN | TIMER0_EN,
TIMER0_RELOAD_EN | TIMER0_EN);
clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
ret = clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
if (ret) {
pr_err("Failed to initialize mmio timer");
return ret;
}
sched_clock_register(orion_read_sched_clock, 32, clk_get_rate(clk));
/* setup timer1 as clockevent timer */
if (setup_irq(irq, &orion_clkevt_irq))
panic("%s: unable to setup irq\n", np->name);
ret = setup_irq(irq, &orion_clkevt_irq);
if (ret) {
pr_err("%s: unable to setup irq\n", np->name);
return ret;
}
ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
orion_clkevt.cpumask = cpumask_of(0);
orion_clkevt.irq = irq;
clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
return 0;
}
CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
CLOCKSOURCE_OF_DECLARE_RET(orion_timer, "marvell,orion-timer", orion_timer_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment