arm: dts: mt7623: add clock controller device nodes

Add clock controller nodes for MT7623, including topckgen, infracfg,
pericfg and apmixedsys. This patch also cleans up two oscillators that
provide clocks for MT7623. Switch the uart clocks to the real ones while
at it.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm/boot/dts/mt7623.dtsi

@@ -14,6 +14,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
 / {
@@ -53,16 +55,18 @@ system_clk: dummy13m {
 		#clock-cells = <0>;
 	};
 
-	rtc_clk: dummy32k {
+	rtc32k: oscillator@1 {
 		compatible = "fixed-clock";
-		clock-frequency = <32000>;
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
 	};
 
 	timer {
@@ -74,6 +78,32 @@ timer {
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt7623-infracfg",
+			     "mediatek,mt2701-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible =  "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt7623-wdt",
 			     "mediatek,mt6589-wdt";
@@ -85,7 +115,7 @@ timer: timer@10008000 {
 			     "mediatek,mt6577-timer";
 		reg = <0 0x10008000 0 0x80>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
+		clocks = <&system_clk>, <&rtc32k>;
 		clock-names = "system-clk", "rtc-clk";
 	};
 
@@ -98,6 +128,14 @@ sysirq: interrupt-controller@10200100 {
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt7623-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -114,7 +152,9 @@ uart0: serial@11002000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>,
+			 <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -123,7 +163,9 @@ uart1: serial@11003000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -132,7 +174,9 @@ uart2: serial@11004000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>,
+			 <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -141,7 +185,9 @@ uart3: serial@11005000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>,
+			 <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };