staging: brcm80211: remove pci core defintion files

The source file nicpci.c is the only file left which needs the
pci core register definitions. These definitions have been added
to the source file so the include files can be removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmsmac/nicpci.c

@@ -24,13 +24,169 @@
 #include <bcmsoc.h>
 #include <bcmdevs.h>
 #include <sbchipc.h>
-#include <pci_core.h>
-#include <pcie_core.h>
 #include <nicpci.h>
 
+/* SPROM offsets */
+#define SRSH_ASPM_OFFSET		4	/* word 4 */
+#define SRSH_ASPM_ENB			0x18	/* bit 3, 4 */
+#define SRSH_ASPM_L1_ENB		0x10	/* bit 4 */
+#define SRSH_ASPM_L0s_ENB		0x8	/* bit 3 */
+
+#define SRSH_PCIE_MISC_CONFIG		5	/* word 5 */
+#define SRSH_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
+#define SRSH_CLKREQ_OFFSET_REV5		20	/* word 20 for srom rev <= 5 */
+#define SRSH_CLKREQ_ENB			0x0800	/* bit 11 */
+#define SRSH_BD_OFFSET                  6	/* word 6 */
+
 /* chipcontrol */
 #define CHIPCTRL_4321_PLL_DOWN	0x800000	/* serdes PLL down override */
 
+/* MDIO control */
+#define MDIOCTL_DIVISOR_MASK		0x7f	/* clock to be used on MDIO */
+#define MDIOCTL_DIVISOR_VAL		0x2
+#define MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
+#define MDIOCTL_ACCESS_DONE		0x100	/* Tranaction complete */
+
+/* MDIO Data */
+#define MDIODATA_MASK			0x0000ffff	/* data 2 bytes */
+#define MDIODATA_TA			0x00020000	/* Turnaround */
+#define MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
+#define MDIODATA_REGADDR_MASK_OLD	0x003c0000	/* Regaddr Mask (rev < 10) */
+#define MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
+#define MDIODATA_DEVADDR_MASK_OLD	0x0fc00000	/* Physmedia devaddr Mask (rev < 10) */
+#define MDIODATA_REGADDR_SHF		18	/* Regaddr shift */
+#define MDIODATA_REGADDR_MASK		0x007c0000	/* Regaddr Mask */
+#define MDIODATA_DEVADDR_SHF		23	/* Physmedia devaddr shift */
+#define MDIODATA_DEVADDR_MASK		0x0f800000	/* Physmedia devaddr Mask */
+#define MDIODATA_WRITE			0x10000000	/* write Transaction */
+#define MDIODATA_READ			0x20000000	/* Read Transaction */
+#define MDIODATA_START			0x40000000	/* start of Transaction */
+
+#define MDIODATA_DEV_ADDR		0x0	/* dev address for serdes */
+#define	MDIODATA_BLK_ADDR		0x1F	/* blk address for serdes */
+
+/* serdes regs (rev < 10) */
+#define MDIODATA_DEV_PLL       		0x1d	/* SERDES PLL Dev */
+#define MDIODATA_DEV_TX        		0x1e	/* SERDES TX Dev */
+#define MDIODATA_DEV_RX        		0x1f	/* SERDES RX Dev */
+
+	/* SERDES RX registers */
+#define SERDES_RX_CTRL			1	/* Rx cntrl */
+#define SERDES_RX_TIMER1		2	/* Rx Timer1 */
+#define SERDES_RX_CDR			6	/* CDR */
+#define SERDES_RX_CDRBW			7	/* CDR BW */
+	/* SERDES RX control register */
+#define SERDES_RX_CTRL_FORCE		0x80	/* rxpolarity_force */
+#define SERDES_RX_CTRL_POLARITY		0x40	/* rxpolarity_value */
+
+	/* SERDES PLL registers */
+#define SERDES_PLL_CTRL                 1	/* PLL control reg */
+#define PLL_CTRL_FREQDET_EN             0x4000	/* bit 14 is FREQDET on */
+
+/* Linkcontrol reg offset in PCIE Cap */
+#define PCIE_CAP_LINKCTRL_OFFSET	16	/* linkctrl offset in pcie cap */
+#define PCIE_CAP_LCREG_ASPML0s		0x01	/* ASPM L0s in linkctrl */
+#define PCIE_CAP_LCREG_ASPML1		0x02	/* ASPM L1 in linkctrl */
+#define PCIE_CLKREQ_ENAB		0x100	/* CLKREQ Enab in linkctrl */
+
+#define PCIE_ASPM_ENAB			3	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_L1_ENAB		2	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_L0s_ENAB		1	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_DISAB			0	/* ASPM L0s & L1 in linkctrl */
+
+/* Power management threshold */
+#define PCIE_L1THRESHOLDTIME_MASK       0xFF00	/* bits 8 - 15 */
+#define PCIE_L1THRESHOLDTIME_SHIFT      8	/* PCIE_L1THRESHOLDTIME_SHIFT */
+#define PCIE_L1THRESHOLD_WARVAL         0x72	/* WAR value */
+#define PCIE_ASPMTIMER_EXTEND		0x01000000	/* > rev7: enable extend ASPM timer */
+
+/* different register spaces to access thr'u pcie indirect access */
+#define PCIE_CONFIGREGS 	1	/* Access to config space */
+#define PCIE_PCIEREGS 		2	/* Access to pcie registers */
+
+/* PCIE protocol PHY diagnostic registers */
+#define	PCIE_PLP_STATUSREG		0x204	/* Status */
+
+/* Status reg PCIE_PLP_STATUSREG */
+#define PCIE_PLP_POLARITYINV_STAT	0x10
+
+/* PCIE protocol DLLP diagnostic registers */
+#define PCIE_DLLP_LCREG			0x100	/* Link Control */
+#define PCIE_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
+
+/* PCIE protocol TLP diagnostic registers */
+#define PCIE_TLP_WORKAROUNDSREG		0x004	/* TLP Workarounds */
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/* Sonics side: PCI core and host control registers */
+struct sbpciregs {
+	u32 control;		/* PCI control */
+	u32 PAD[3];
+	u32 arbcontrol;	/* PCI arbiter control */
+	u32 clkrun;		/* Clkrun Control (>=rev11) */
+	u32 PAD[2];
+	u32 intstatus;	/* Interrupt status */
+	u32 intmask;		/* Interrupt mask */
+	u32 sbtopcimailbox;	/* Sonics to PCI mailbox */
+	u32 PAD[9];
+	u32 bcastaddr;	/* Sonics broadcast address */
+	u32 bcastdata;	/* Sonics broadcast data */
+	u32 PAD[2];
+	u32 gpioin;		/* ro: gpio input (>=rev2) */
+	u32 gpioout;		/* rw: gpio output (>=rev2) */
+	u32 gpioouten;	/* rw: gpio output enable (>= rev2) */
+	u32 gpiocontrol;	/* rw: gpio control (>= rev2) */
+	u32 PAD[36];
+	u32 sbtopci0;	/* Sonics to PCI translation 0 */
+	u32 sbtopci1;	/* Sonics to PCI translation 1 */
+	u32 sbtopci2;	/* Sonics to PCI translation 2 */
+	u32 PAD[189];
+	u32 pcicfg[4][64];	/* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
+	u16 sprom[36];	/* SPROM shadow Area */
+	u32 PAD[46];
+};
+
+/* SB side: PCIE core and host control registers */
+typedef struct sbpcieregs {
+	u32 control;		/* host mode only */
+	u32 PAD[2];
+	u32 biststatus;	/* bist Status: 0x00C */
+	u32 gpiosel;		/* PCIE gpio sel: 0x010 */
+	u32 gpioouten;	/* PCIE gpio outen: 0x14 */
+	u32 PAD[2];
+	u32 intstatus;	/* Interrupt status: 0x20 */
+	u32 intmask;		/* Interrupt mask: 0x24 */
+	u32 sbtopcimailbox;	/* sb to pcie mailbox: 0x028 */
+	u32 PAD[53];
+	u32 sbtopcie0;	/* sb to pcie translation 0: 0x100 */
+	u32 sbtopcie1;	/* sb to pcie translation 1: 0x104 */
+	u32 sbtopcie2;	/* sb to pcie translation 2: 0x108 */
+	u32 PAD[5];
+
+	/* pcie core supports in direct access to config space */
+	u32 configaddr;	/* pcie config space access: Address field: 0x120 */
+	u32 configdata;	/* pcie config space access: Data field: 0x124 */
+
+	/* mdio access to serdes */
+	u32 mdiocontrol;	/* controls the mdio access: 0x128 */
+	u32 mdiodata;	/* Data to the mdio access: 0x12c */
+
+	/* pcie protocol phy/dllp/tlp register indirect access mechanism */
+	u32 pcieindaddr;	/* indirect access to the internal register: 0x130 */
+	u32 pcieinddata;	/* Data to/from the internal regsiter: 0x134 */
+
+	u32 clkreqenctrl;	/* >= rev 6, Clkreq rdma control : 0x138 */
+	u32 PAD[177];
+	u32 pciecfg[4][64];	/* 0x400 - 0x7FF, PCIE Cfg Space */
+	u16 sprom[64];	/* SPROM shadow Area */
+} sbpcieregs_t;
+
 typedef struct {
 	union {
 		sbpcieregs_t *pcieregs;

drivers/staging/brcm80211/brcmsmac/nicpci.h

@@ -56,6 +56,18 @@
 /* bar0 + 12K accesses chipc core registers */
 #define PCI_16KB0_CCREGS_OFFSET	(12 * 1024)
 
+#define PCI_CLKRUN_DSBL	0x8000	/* Bit 15 forceClkrun */
+
+/* Sonics to PCI translation types */
+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
+#define	SBTOPCI_BURST	0x8		/* burst enable */
+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
+
+/* PCI core index in SROM shadow area */
+#define SRSH_PI_OFFSET	0	/* first word */
+#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
+#define SRSH_PI_SHIFT	12	/* bit 15:12 */
+
 struct si_pub;
 
 extern void *pcicore_init(struct si_pub *sih, void *pdev, void *regs);

drivers/staging/brcm80211/brcmsmac/wlc_bmac.c

@@ -48,7 +48,6 @@
 #include "wl_export.h"
 #include "wl_ucode.h"
 #include "wlc_antsel.h"
-#include "pcie_core.h"
 #include "wlc_alloc.h"
 #include "wl_dbg.h"
 #include "wlc_bmac.h"

drivers/staging/brcm80211/include/pci_core.h

-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef	_PCI_CORE_H_
-#define	_PCI_CORE_H_
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define	_PADLINE(line)	pad ## line
-#define	_XSTR(line)	_PADLINE(line)
-#define	PAD		_XSTR(__LINE__)
-#endif
-
-/* Sonics side: PCI core and host control registers */
-struct sbpciregs {
-	u32 control;		/* PCI control */
-	u32 PAD[3];
-	u32 arbcontrol;	/* PCI arbiter control */
-	u32 clkrun;		/* Clkrun Control (>=rev11) */
-	u32 PAD[2];
-	u32 intstatus;	/* Interrupt status */
-	u32 intmask;		/* Interrupt mask */
-	u32 sbtopcimailbox;	/* Sonics to PCI mailbox */
-	u32 PAD[9];
-	u32 bcastaddr;	/* Sonics broadcast address */
-	u32 bcastdata;	/* Sonics broadcast data */
-	u32 PAD[2];
-	u32 gpioin;		/* ro: gpio input (>=rev2) */
-	u32 gpioout;		/* rw: gpio output (>=rev2) */
-	u32 gpioouten;	/* rw: gpio output enable (>= rev2) */
-	u32 gpiocontrol;	/* rw: gpio control (>= rev2) */
-	u32 PAD[36];
-	u32 sbtopci0;	/* Sonics to PCI translation 0 */
-	u32 sbtopci1;	/* Sonics to PCI translation 1 */
-	u32 sbtopci2;	/* Sonics to PCI translation 2 */
-	u32 PAD[189];
-	u32 pcicfg[4][64];	/* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
-	u16 sprom[36];	/* SPROM shadow Area */
-	u32 PAD[46];
-};
-
-#endif				/* _LANGUAGE_ASSEMBLY */
-
-/* PCI control */
-#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-#define PCI_RST		0x02	/* Value driven out to pin */
-#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
-#define PCI_CLK		0x08	/* Gate for clock driven out to pin */
-
-/* PCI arbiter control */
-#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
-#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
-/* ParkID - for PCI corerev >= 8 */
-#define PCI_PARKID_MASK		0x1c	/* Selects which agent is parked on an idle bus */
-#define PCI_PARKID_SHIFT	2
-#define PCI_PARKID_EXT0		0	/* External master 0 */
-#define PCI_PARKID_EXT1		1	/* External master 1 */
-#define PCI_PARKID_EXT2		2	/* External master 2 */
-#define PCI_PARKID_EXT3		3	/* External master 3 (rev >= 11) */
-#define PCI_PARKID_INT		3	/* Internal master (rev < 11) */
-#define PCI11_PARKID_INT	4	/* Internal master (rev >= 11) */
-#define PCI_PARKID_LAST		4	/* Last active master (rev < 11) */
-#define PCI11_PARKID_LAST	5	/* Last active master (rev >= 11) */
-
-#define PCI_CLKRUN_DSBL	0x8000	/* Bit 15 forceClkrun */
-
-/* Interrupt status/mask */
-#define PCI_INTA	0x01	/* PCI INTA# is asserted */
-#define PCI_INTB	0x02	/* PCI INTB# is asserted */
-#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
-#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
-#define PCI_PME		0x10	/* PCI PME# is asserted */
-
-/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
-#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
-#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
-#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
-#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
-#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
-#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
-#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
-
-/* Sonics broadcast address */
-#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
-
-/* Sonics to PCI translation types */
-#define SBTOPCI0_MASK	0xfc000000
-#define SBTOPCI1_MASK	0xfc000000
-#define SBTOPCI2_MASK	0xc0000000
-#define SBTOPCI_MEM	0
-#define SBTOPCI_IO	1
-#define SBTOPCI_CFG0	2
-#define SBTOPCI_CFG1	3
-#define	SBTOPCI_PREF	0x4	/* prefetch enable */
-#define	SBTOPCI_BURST	0x8	/* burst enable */
-#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
-#define	SBTOPCI_RC_READ		0x00	/* memory read */
-#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
-#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
-
-/* PCI core index in SROM shadow area */
-#define SRSH_PI_OFFSET	0	/* first word */
-#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
-#define SRSH_PI_SHIFT	12	/* bit 15:12 */
-
-#endif				/* _PCI_CORE_H_ */