Commit fd3e9d57 authored by Jammy Huang's avatar Jammy Huang Committed by Mauro Carvalho Chehab

media: aspeed: add more debug log messages

The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information

[hverkuil: use %pad for dma_addr_t to avoid compiler warnings]
Signed-off-by: default avatarJammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent a3de90af
......@@ -482,12 +482,17 @@ static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
static void update_perf(struct aspeed_video_perf *p)
{
struct aspeed_video *v = container_of(p, struct aspeed_video,
perf);
p->duration =
ktime_to_ms(ktime_sub(ktime_get(), p->last_sample));
p->totaltime += p->duration;
p->duration_max = max(p->duration, p->duration_max);
p->duration_min = min(p->duration, p->duration_min);
v4l2_dbg(2, debug, &v->v4l2_dev, "time consumed: %d ms\n",
p->duration);
}
static int aspeed_video_start_frame(struct aspeed_video *video)
......@@ -617,6 +622,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
*/
sts &= aspeed_video_read(video, VE_INTERRUPT_CTRL);
v4l2_dbg(2, debug, &video->v4l2_dev, "irq sts=%#x %s%s%s%s\n", sts,
sts & VE_INTERRUPT_MODE_DETECT_WD ? ", unlock" : "",
sts & VE_INTERRUPT_MODE_DETECT ? ", lock" : "",
sts & VE_INTERRUPT_CAPTURE_COMPLETE ? ", capture-done" : "",
sts & VE_INTERRUPT_COMP_COMPLETE ? ", comp-done" : "");
/*
* Resolution changed or signal was lost; reset the engine and
* re-initialize
......@@ -927,6 +938,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
if (size < DIRECT_FETCH_THRESHOLD) {
v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
aspeed_video_write(video, VE_TGS_0,
FIELD_PREP(VE_TGS_FIRST,
video->frame_left - 1) |
......@@ -938,6 +950,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
video->frame_bottom + 1));
aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
} else {
v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
}
......@@ -954,6 +967,10 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
goto err_mem;
v4l2_dbg(1, debug, &video->v4l2_dev, "src buf0 addr(%pad) size(%d)\n",
&video->srcs[0].dma, video->srcs[0].size);
v4l2_dbg(1, debug, &video->v4l2_dev, "src buf1 addr(%pad) size(%d)\n",
&video->srcs[1].dma, video->srcs[1].size);
aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
}
......@@ -1218,6 +1235,9 @@ static int aspeed_video_set_dv_timings(struct file *file, void *fh,
timings->type = V4L2_DV_BT_656_1120;
v4l2_dbg(1, debug, &video->v4l2_dev, "set new timings(%dx%d)\n",
timings->bt.width, timings->bt.height);
return 0;
}
......@@ -1398,6 +1418,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
};
v4l2_dbg(1, debug, &video->v4l2_dev, "fire source change event\n");
v4l2_event_queue(&video->vdev, &ev);
} else if (test_bit(VIDEO_STREAMING, &video->flags)) {
/* No resolution change so just restart streaming */
......@@ -1733,6 +1754,7 @@ static int aspeed_video_init(struct aspeed_video *video)
dev_err(dev, "Unable to request IRQ %d\n", irq);
return rc;
}
dev_info(video->dev, "irq %d\n", irq);
video->eclk = devm_clk_get(dev, "eclk");
if (IS_ERR(video->eclk)) {
......@@ -1769,6 +1791,8 @@ static int aspeed_video_init(struct aspeed_video *video)
rc = -ENOMEM;
goto err_release_reserved_mem;
}
dev_info(video->dev, "alloc mem size(%d) at %pad for jpeg header\n",
VE_JPEG_HEADER_SIZE, &video->jpeg.dma);
aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment