Merge tag 'tags/mfd-power-charger-regulator-v3.18' into next

Immutable branch between MFD, Power, Charger and Regulator for v3.18

Documentation/ABI/testing/sysfs-class-power

@@ -18,3 +18,17 @@ Description:
 		This file is writeable and can be used to set the assumed
 		battery 'full level'. As batteries age, this value has to be
 		amended over time.
+
+What:		/sys/class/power_supply/max14577-charger/device/fast_charge_timer
+Date:		July 2014
+KernelVersion:	3.18.0
+Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+		This entry shows and sets the maximum time the max14577
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 5, 6 or 7 (hours),
+		- 0: disabled.

Documentation/devicetree/bindings/mfd/max14577.txt

+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent :  The parent interrupt controller.
+
+
+Required nodes:
+ - charger :
+	Node for configuring the charger driver.
+	Required properties:
+		- compatible : "maxim,max14577-charger"
+			or "maxim,max77836-charger"
+		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
+			Valid values:
+			- for max14577: 90000 - 950000;
+			- for max77836: 45000 - 475000;
+		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
+			Valid values:
+			- for max14577: 50000 - 200000;
+			- for max77836: 5000 - 100000;
+		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
+			In an overvoltage condition, INT asserts and charging
+			stops. Valid values:
+			- 6000000, 6500000, 7000000, 7500000;
+		- maxim,constant-uvolt : Battery Constant Voltage in uV;
+			Valid values:
+			- 4000000 - 4280000 (step by 20000);
+			- 4350000;
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+	Required properties:
+		- compatible : "maxim,max14577-regulator"
+			or "maxim,max77836-regulator"
+
+	May contain a sub-node per regulator from the list below. Each
+	sub-node should contain the constraints and initialization information
+	for that regulator. See regulator.txt for a description of standard
+	properties for these sub-nodes.
+
+	List of valid regulator names:
+	- for max14577: CHARGER, SAFEOUT.
+	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+	The SAFEOUT is a fixed voltage regulator so there is no need to specify
+	voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+	compatible = "maxim,max14577";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max14577-muic {
+		compatible = "maxim,max14577-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max14577-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max14577-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <450000>;
+		maxim,eoc-uamp = <50000>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};
+
+
+max77836@25 {
+	compatible = "maxim,max77836";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max77836-muic {
+		compatible = "maxim,max77836-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max77836-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+		LDO1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		LDO2 {
+			regulator-name = "LDO2";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3950000>;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max77836-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <225000>;
+		maxim,eoc-uamp = <7500>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};

drivers/mfd/max14577.c

@@ -26,6 +26,87 @@
 #include <linux/mfd/max14577.h>
 #include <linux/mfd/max14577-private.h>
 
+/*
+ * Table of valid charger currents for different Maxim chipsets.
+ * It is placed here because it is used by both charger and regulator driver.
+ */
+const struct maxim_charger_current maxim_charger_currents[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
+	[MAXIM_DEVICE_TYPE_MAX14577] = {
+		.min		= MAX14577_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX14577_CHARGER_CURRENT_LIMIT_MAX,
+	},
+	[MAXIM_DEVICE_TYPE_MAX77836] = {
+		.min		= MAX77836_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX77836_CHARGER_CURRENT_LIMIT_MAX,
+	},
+};
+EXPORT_SYMBOL_GPL(maxim_charger_currents);
+
+/*
+ * maxim_charger_calc_reg_current - Calculate register value for current
+ * @limits:	constraints for charger, matching the MBCICHWRC register
+ * @min_ua:	minimal requested current, micro Amps
+ * @max_ua:	maximum requested current, micro Amps
+ * @dst:	destination to store calculated register value
+ *
+ * Calculates the value of MBCICHWRC (Fast Battery Charge Current) register
+ * for given current and stores it under pointed 'dst'. The stored value
+ * combines low bit (MBCICHWRCL) and high bits (MBCICHWRCH). It is also
+ * properly shifted.
+ *
+ * The calculated register value matches the current which:
+ *  - is always between <limits.min, limits.max>;
+ *  - is always less or equal to max_ua;
+ *  - is the highest possible value;
+ *  - may be lower than min_ua.
+ *
+ * On success returns 0. On error returns -EINVAL (requested min/max current
+ * is outside of given charger limits) and 'dst' is not set.
+ */
+int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
+		unsigned int min_ua, unsigned int max_ua, u8 *dst)
+{
+	unsigned int current_bits = 0xf;
+
+	if (min_ua > max_ua)
+		return -EINVAL;
+
+	if (min_ua > limits->max || max_ua < limits->min)
+		return -EINVAL;
+
+	if (max_ua < limits->high_start) {
+		/*
+		 * Less than high_start, so set the minimal current
+		 * (turn Low Bit off, 0 as high bits).
+		 */
+		*dst = 0x0;
+		return 0;
+	}
+
+	/* max_ua is in range: <high_start, infinite>, cut it to limits.max */
+	max_ua = min(limits->max, max_ua);
+	max_ua -= limits->high_start;
+	/*
+	 * There is no risk of overflow 'max_ua' here because:
+	 *  - max_ua >= limits.high_start
+	 *  - BUILD_BUG checks that 'limits' are: max >= high_start + high_step
+	 */
+	current_bits = max_ua / limits->high_step;
+
+	/* Turn Low Bit on (use range <limits.high_start, limits.max>) ... */
+	*dst = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
+	/* and set proper High Bits */
+	*dst |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(maxim_charger_calc_reg_current);
+
 static const struct mfd_cell max14577_devs[] = {
 	{
 		.name = "max14577-muic",
@@ -35,7 +116,10 @@ static const struct mfd_cell max14577_devs[] = {
 		.name = "max14577-regulator",
 		.of_compatible = "maxim,max14577-regulator",
 	},
-	{ .name = "max14577-charger", },
+	{
+		.name = "max14577-charger",
+		.of_compatible = "maxim,max14577-charger",
+	},
 };
 
 static const struct mfd_cell max77836_devs[] = {
@@ -463,6 +547,20 @@ static int __init max14577_i2c_init(void)
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_i2c_id) != MAXIM_DEVICE_TYPE_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_dt_match) != MAXIM_DEVICE_TYPE_NUM);
 
+	/* Valid charger current values must be provided for each chipset */
+	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX14577_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX77836_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
 	return i2c_add_driver(&max14577_i2c_driver);
 }
 subsys_initcall(max14577_i2c_init);

drivers/power/Kconfig

@@ -325,11 +325,12 @@ config CHARGER_MANAGER
           with help of suspend_again support.
 
 config CHARGER_MAX14577
-	tristate "Maxim MAX14577 MUIC battery charger driver"
+	tristate "Maxim MAX14577/77836 battery charger driver"
 	depends on MFD_MAX14577
+	select SYSFS
 	help
 	  Say Y to enable support for the battery charger control sysfs and
-	  platform data of MAX14577 MUICs.
+	  platform data of MAX14577/77836 MUICs.
 
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"

drivers/power/max17040_battery.c

@@ -277,7 +277,8 @@ static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct i2c_device_id max17040_id[] = {
-	{ "max17040", 0 },
+	{ "max17040" },
+	{ "max77836-battery" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max17040_id);

drivers/regulator/max14577.c

@@ -22,42 +22,6 @@
 #include <linux/mfd/max14577-private.h>
 #include <linux/regulator/of_regulator.h>
 
-/*
- * Valid limits of current for max14577 and max77836 chargers.
- * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
- * register for given chipset.
- */
-struct maxim_charger_current {
-	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
-	unsigned int min;
-	/*
-	 * Minimal current when high setting is active,
-	 * set in CHGCTRL4/MBCICHWRCH, uA
-	 */
-	unsigned int high_start;
-	/* Value of one step in high setting, uA */
-	unsigned int high_step;
-	/* Maximum current of high setting, uA */
-	unsigned int max;
-};
-
-/* Table of valid charger currents for different Maxim chipsets */
-static const struct maxim_charger_current maxim_charger_currents[] = {
-	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
-	[MAXIM_DEVICE_TYPE_MAX14577] = {
-		.min		= MAX14577_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX14577_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-	[MAXIM_DEVICE_TYPE_MAX77836] = {
-		.min		= MAX77836_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX77836_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-};
-
 static int max14577_reg_is_enabled(struct regulator_dev *rdev)
 {
 	int rid = rdev_get_id(rdev);
@@ -103,8 +67,8 @@ static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
 static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 		int min_uA, int max_uA)
 {
-	int i, current_bits = 0xf;
 	u8 reg_data;
+	int ret;
 	struct max14577 *max14577 = rdev_get_drvdata(rdev);
 	const struct maxim_charger_current *limits =
 		&maxim_charger_currents[max14577->dev_type];
@@ -112,35 +76,9 @@ static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 	if (rdev_get_id(rdev) != MAX14577_CHARGER)
 		return -EINVAL;
 
-	if (min_uA > limits->max || max_uA < limits->min)
-		return -EINVAL;
-
-	if (max_uA < limits->high_start) {
-		/*
-		 * Less than high_start,
-		 * so set the minimal current (turn only Low Bit off)
-		 */
-		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
-		return max14577_update_reg(rdev->regmap,
-				MAX14577_CHG_REG_CHG_CTRL4,
-				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
-	}
-
-	/*
-	 * max_uA is in range: <high_start, inifinite>, so search for
-	 * valid current starting from maximum current.
-	 */
-	for (i = limits->max; i >= limits->high_start; i -= limits->high_step) {
-		if (i <= max_uA)
-			break;
-		current_bits--;
-	}
-	BUG_ON(current_bits < 0); /* Cannot happen */
-
-	/* Turn Low Bit on (use range high_start-max)... */
-	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
-	/* and set proper High Bits */
-	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+	ret = maxim_charger_calc_reg_current(limits, min_uA, max_uA, &reg_data);
+	if (ret)
+		return ret;
 
 	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
 			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
@@ -442,16 +380,6 @@ static struct platform_driver max14577_regulator_driver = {
 
 static int __init max14577_regulator_init(void)
 {
-	/* Check for valid values for charger */
-	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
-	BUILD_BUG_ON(MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX77836_REGULATOR_CURRENT_LIMIT_MAX);
-	/* Valid charger current values must be provided for each chipset */
-	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
-
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);
 

include/linux/mfd/max14577-private.h

@@ -72,15 +72,33 @@ enum max14577_muic_reg {
 	MAX14577_MUIC_REG_END,
 };
 
+/*
+ * Combined charger types for max14577 and max77836.
+ *
+ * On max14577 three lower bits map to STATUS2/CHGTYP field.
+ * However the max77836 has different two last values of STATUS2/CHGTYP.
+ * To indicate the difference enum has two additional values for max77836.
+ * These values are just a register value bitwise OR with 0x8.
+ */
 enum max14577_muic_charger_type {
-	MAX14577_CHARGER_TYPE_NONE = 0,
-	MAX14577_CHARGER_TYPE_USB,
-	MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT,
-	MAX14577_CHARGER_TYPE_DEDICATED_CHG,
-	MAX14577_CHARGER_TYPE_SPECIAL_500MA,
-	MAX14577_CHARGER_TYPE_SPECIAL_1A,
-	MAX14577_CHARGER_TYPE_RESERVED,
-	MAX14577_CHARGER_TYPE_DEAD_BATTERY = 7,
+	MAX14577_CHARGER_TYPE_NONE		= 0x0,
+	MAX14577_CHARGER_TYPE_USB		= 0x1,
+	MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT	= 0x2,
+	MAX14577_CHARGER_TYPE_DEDICATED_CHG	= 0x3,
+	MAX14577_CHARGER_TYPE_SPECIAL_500MA	= 0x4,
+	/* Special 1A or 2A charger */
+	MAX14577_CHARGER_TYPE_SPECIAL_1A	= 0x5,
+	/* max14577: reserved, used on max77836 */
+	MAX14577_CHARGER_TYPE_RESERVED		= 0x6,
+	/* max14577: dead-battery charing with maximum current 100mA */
+	MAX14577_CHARGER_TYPE_DEAD_BATTERY	= 0x7,
+	/*
+	 * max77836: special charger (bias on D+/D-),
+	 * matches register value of 0x6
+	 */
+	MAX77836_CHARGER_TYPE_SPECIAL_BIAS	= 0xe,
+	/* max77836: reserved, register value 0x7 */
+	MAX77836_CHARGER_TYPE_RESERVED		= 0xf,
 };
 
 /* MAX14577 interrupts */
@@ -121,13 +139,15 @@ enum max14577_muic_charger_type {
 #define STATUS2_CHGTYP_SHIFT		0
 #define STATUS2_CHGDETRUN_SHIFT		3
 #define STATUS2_DCDTMR_SHIFT		4
-#define STATUS2_DBCHG_SHIFT		5
+#define MAX14577_STATUS2_DBCHG_SHIFT	5
+#define MAX77836_STATUS2_DXOVP_SHIFT	5
 #define STATUS2_VBVOLT_SHIFT		6
 #define MAX77836_STATUS2_VIDRM_SHIFT	7
 #define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
 #define STATUS2_CHGDETRUN_MASK		BIT(STATUS2_CHGDETRUN_SHIFT)
 #define STATUS2_DCDTMR_MASK		BIT(STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DBCHG_MASK		BIT(STATUS2_DBCHG_SHIFT)
+#define MAX14577_STATUS2_DBCHG_MASK	BIT(MAX14577_STATUS2_DBCHG_SHIFT)
+#define MAX77836_STATUS2_DXOVP_MASK	BIT(MAX77836_STATUS2_DXOVP_SHIFT)
 #define STATUS2_VBVOLT_MASK		BIT(STATUS2_VBVOLT_SHIFT)
 #define MAX77836_STATUS2_VIDRM_MASK	BIT(MAX77836_STATUS2_VIDRM_SHIFT)
 
@@ -177,9 +197,11 @@ enum max14577_muic_charger_type {
 #define CTRL3_JIGSET_SHIFT		0
 #define CTRL3_BOOTSET_SHIFT		2
 #define CTRL3_ADCDBSET_SHIFT		4
+#define CTRL3_WBTH_SHIFT		6
 #define CTRL3_JIGSET_MASK		(0x3 << CTRL3_JIGSET_SHIFT)
 #define CTRL3_BOOTSET_MASK		(0x3 << CTRL3_BOOTSET_SHIFT)
 #define CTRL3_ADCDBSET_MASK		(0x3 << CTRL3_ADCDBSET_SHIFT)
+#define CTRL3_WBTH_MASK			(0x3 << CTRL3_WBTH_SHIFT)
 
 /* Slave addr = 0x4A: Charger */
 enum max14577_charger_reg {
@@ -210,16 +232,20 @@ enum max14577_charger_reg {
 #define CDETCTRL1_CHGTYPMAN_SHIFT	1
 #define CDETCTRL1_DCDEN_SHIFT		2
 #define CDETCTRL1_DCD2SCT_SHIFT		3
-#define CDETCTRL1_DCHKTM_SHIFT		4
-#define CDETCTRL1_DBEXIT_SHIFT		5
+#define MAX14577_CDETCTRL1_DCHKTM_SHIFT	4
+#define MAX77836_CDETCTRL1_CDLY_SHIFT	4
+#define MAX14577_CDETCTRL1_DBEXIT_SHIFT	5
+#define MAX77836_CDETCTRL1_DCDCPL_SHIFT	5
 #define CDETCTRL1_DBIDLE_SHIFT		6
 #define CDETCTRL1_CDPDET_SHIFT		7
 #define CDETCTRL1_CHGDETEN_MASK		BIT(CDETCTRL1_CHGDETEN_SHIFT)
 #define CDETCTRL1_CHGTYPMAN_MASK	BIT(CDETCTRL1_CHGTYPMAN_SHIFT)
 #define CDETCTRL1_DCDEN_MASK		BIT(CDETCTRL1_DCDEN_SHIFT)
 #define CDETCTRL1_DCD2SCT_MASK		BIT(CDETCTRL1_DCD2SCT_SHIFT)
-#define CDETCTRL1_DCHKTM_MASK		BIT(CDETCTRL1_DCHKTM_SHIFT)
-#define CDETCTRL1_DBEXIT_MASK		BIT(CDETCTRL1_DBEXIT_SHIFT)
+#define MAX14577_CDETCTRL1_DCHKTM_MASK	BIT(MAX14577_CDETCTRL1_DCHKTM_SHIFT)
+#define MAX77836_CDETCTRL1_CDDLY_MASK	BIT(MAX77836_CDETCTRL1_CDDLY_SHIFT)
+#define MAX14577_CDETCTRL1_DBEXIT_MASK	BIT(MAX14577_CDETCTRL1_DBEXIT_SHIFT)
+#define MAX77836_CDETCTRL1_DCDCPL_MASK	BIT(MAX77836_CDETCTRL1_DCDCPL_SHIFT)
 #define CDETCTRL1_DBIDLE_MASK		BIT(CDETCTRL1_DBIDLE_SHIFT)
 #define CDETCTRL1_CDPDET_MASK		BIT(CDETCTRL1_CDPDET_SHIFT)
 
@@ -255,17 +281,36 @@ enum max14577_charger_reg {
 #define CHGCTRL7_OTPCGHCVS_SHIFT	0
 #define CHGCTRL7_OTPCGHCVS_MASK		(0x3 << CHGCTRL7_OTPCGHCVS_SHIFT)
 
-/* MAX14577 regulator current limits (as in CHGCTRL4 register), uA */
-#define MAX14577_REGULATOR_CURRENT_LIMIT_MIN		 90000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START	200000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 50000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX		950000
-
-/* MAX77836 regulator current limits (as in CHGCTRL4 register), uA */
-#define MAX77836_REGULATOR_CURRENT_LIMIT_MIN		 45000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START	100000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 25000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_MAX		475000
+/* MAX14577 charger current limits (as in CHGCTRL4 register), uA */
+#define MAX14577_CHARGER_CURRENT_LIMIT_MIN		 90000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START	200000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP	 50000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_MAX		950000U
+
+/* MAX77836 charger current limits (as in CHGCTRL4 register), uA */
+#define MAX77836_CHARGER_CURRENT_LIMIT_MIN		 45000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START	100000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP	 25000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_MAX		475000U
+
+/*
+ * MAX14577 charger End-Of-Charge current limits
+ * (as in CHGCTRL5 register), uA
+ */
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN		50000U
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP		10000U
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX		200000U
+
+/*
+ * MAX14577/MAX77836 Battery Constant Voltage
+ * (as in CHGCTRL3 register), uV
+ */
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN		4000000U
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP		20000U
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX		4350000U
+
+/* Default value for fast charge timer, in hours */
+#define MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT		5
 
 /* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
 #define MAX14577_REGULATOR_SAFEOUT_VOLTAGE		4900000

include/linux/mfd/max14577.h

@@ -54,6 +54,13 @@ struct max14577_regulator_platform_data {
 	struct device_node *of_node;
 };
 
+struct max14577_charger_platform_data {
+	u32 constant_uvolt;
+	u32 fast_charge_uamp;
+	u32 eoc_uamp;
+	u32 ovp_uvolt;
+};
+
 /*
  * MAX14577 MFD platform data
  */
@@ -74,4 +81,27 @@ struct max14577_platform_data {
 	struct max14577_regulator_platform_data *regulators;
 };
 
+/*
+ * Valid limits of current for max14577 and max77836 chargers.
+ * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
+ * register for given chipset.
+ */
+struct maxim_charger_current {
+	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
+	unsigned int min;
+	/*
+	 * Minimal current when high setting is active,
+	 * set in CHGCTRL4/MBCICHWRCH, uA
+	 */
+	unsigned int high_start;
+	/* Value of one step in high setting, uA */
+	unsigned int high_step;
+	/* Maximum current of high setting, uA */
+	unsigned int max;
+};
+
+extern const struct maxim_charger_current maxim_charger_currents[];
+extern int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
+		unsigned int min_ua, unsigned int max_ua, u8 *dst);
+
 #endif /* __MAX14577_H__ */