intel: remove unused macros

As found by the compile option -Wunused-macros, remove these macros
that are never used by the code.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/e100.c

@@ -1430,7 +1430,6 @@ static int e100_phy_check_without_mii(struct nic *nic)
 #define MII_NSC_CONG		MII_RESV1
 #define NSC_CONG_ENABLE		0x0100
 #define NSC_CONG_TXREADY	0x0400
-#define ADVERTISE_FC_SUPPORTED	0x0400
 static int e100_phy_init(struct nic *nic)
 {
 	struct net_device *netdev = nic->netdev;

drivers/net/ethernet/intel/e1000/e1000_param.c

@@ -82,7 +82,6 @@ E1000_PARAM(Duplex, "Duplex setting");
  */
 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
 #define AUTONEG_ADV_DEFAULT  0x2F
-#define AUTONEG_ADV_MASK     0x2F
 
 /* User Specified Flow Control Override
  *
@@ -95,7 +94,6 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
  * Default Value: Read flow control settings from the EEPROM
  */
 E1000_PARAM(FlowControl, "Flow Control setting");
-#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
 
 /* XsumRX - Receive Checksum Offload Enable/Disable
  *

drivers/net/ethernet/intel/e1000e/param.c

@@ -101,8 +101,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
  * demoted to the most advanced interrupt mode available.
  */
 E1000_PARAM(IntMode, "Interrupt Mode");
-#define MAX_INTMODE	2
-#define MIN_INTMODE	0
 
 /* Enable Smart Power Down of the PHY
  *

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -236,8 +236,6 @@ static void __i40e_add_stat_strings(u8 **p, const struct i40e_stats stats[],
 	I40E_STAT(struct i40e_cp_veb_tc_stats, _name, _stat)
 #define I40E_PFC_STAT(_name, _stat) \
 	I40E_STAT(struct i40e_pfc_stats, _name, _stat)
-#define I40E_QUEUE_STAT(_name, _stat) \
-	I40E_STAT(struct i40e_ring, _name, _stat)
 
 static const struct i40e_stats i40e_gstrings_net_stats[] = {
 	I40E_NETDEV_STAT(rx_packets),

drivers/net/ethernet/intel/i40e/i40e_ptp.c

@@ -27,7 +27,6 @@
 #define I40E_PRTTSYN_CTL1_TSYNTYPE_V2  (2 << \
 					I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
 #define I40E_SUBDEV_ID_25G_PTP_PIN	0xB
-#define to_dev(obj) container_of(obj, struct device, kobj)
 
 enum i40e_ptp_pin {
 	SDP3_2 = 0,

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -372,7 +372,6 @@ static void i40e_change_filter_num(bool ipv4, bool add, u16 *ipv4_filter_num,
 	}
 }
 
-#define IP_HEADER_OFFSET		14
 #define I40E_UDPIP_DUMMY_PACKET_LEN	42
 #define I40E_UDPIP6_DUMMY_PACKET_LEN	62
 /**

drivers/net/ethernet/intel/iavf/iavf_virtchnl.c

@@ -5,10 +5,6 @@
 #include "iavf_prototype.h"
 #include "iavf_client.h"
 
-/* busy wait delay in msec */
-#define IAVF_BUSY_WAIT_DELAY 10
-#define IAVF_BUSY_WAIT_COUNT 50
-
 /**
  * iavf_send_pf_msg
  * @adapter: adapter structure

drivers/net/ethernet/intel/igc/igc_ptp.c

@@ -15,7 +15,6 @@
 #define INCVALUE_MASK		0x7fffffff
 #define ISGN			0x80000000
 
-#define IGC_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
 #define IGC_PTP_TX_TIMEOUT		(HZ * 15)
 
 #define IGC_PTM_STAT_SLEEP		2

drivers/net/ethernet/intel/ixgb/ixgb_main.c

@@ -1704,7 +1704,6 @@ ixgb_update_stats(struct ixgb_adapter *adapter)
 	netdev->stats.tx_window_errors = 0;
 }
 
-#define IXGB_MAX_INTR 10
 /**
  * ixgb_intr - Interrupt Handler
  * @irq: interrupt number

drivers/net/ethernet/intel/ixgb/ixgb_param.c

@@ -141,8 +141,6 @@ IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
 #define MAX_RDTR			 0xFFFF
 #define MIN_RDTR			      0
 
-#define XSUMRX_DEFAULT		 OPTION_ENABLED
-
 #define DEFAULT_FCRTL	  		0x28000
 #define DEFAULT_FCRTH			0x30000
 #define MIN_FCRTL			      0

drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c

@@ -8,12 +8,10 @@
 #include "ixgbe_sriov.h"
 
 /* Callbacks for DCB netlink in the kernel */
-#define BIT_DCB_MODE	0x01
 #define BIT_PFC		0x02
 #define BIT_PG_RX	0x04
 #define BIT_PG_TX	0x08
 #define BIT_APP_UPCHG	0x10
-#define BIT_LINKSPEED   0x80
 
 /* Responses for the DCB_C_SET_ALL command */
 #define DCB_HW_CHG_RST  0  /* DCB configuration changed with reset */

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -18,8 +18,6 @@
 #include "ixgbe_phy.h"
 
 
-#define IXGBE_ALL_RAR_ENTRIES 16
-
 enum {NETDEV_STATS, IXGBE_STATS};
 
 struct ixgbe_stats {

drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c

@@ -138,7 +138,6 @@
 #define IXGBE_X550_BASE_PERIOD 0xC80000000ULL
 #define INCVALUE_MASK	0x7FFFFFFF
 #define ISGN		0x80000000
-#define MAX_TIMADJ	0x7FFFFFFF
 
 /**
  * ixgbe_ptp_setup_sdp_X540

drivers/net/ethernet/intel/ixgbevf/ethtool.c

@@ -17,8 +17,6 @@
 
 #include "ixgbevf.h"
 
-#define IXGBE_ALL_RAR_ENTRIES 16
-
 enum {NETDEV_STATS, IXGBEVF_STATS};
 
 struct ixgbe_stats {
@@ -130,8 +128,6 @@ static void ixgbevf_set_msglevel(struct net_device *netdev, u32 data)
 	adapter->msg_enable = data;
 }
 
-#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_)
-
 static int ixgbevf_get_regs_len(struct net_device *netdev)
 {
 #define IXGBE_REGS_LEN 45