Commit fe05203b authored by Rabin Vincent's avatar Rabin Vincent Committed by Linus Walleij

mach-ux500: move MOP500 pins to separate file

Split off pin definitions for the MOP500 board family to its
own file.
Signed-off-by: default avatarRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 3c4bee04
...@@ -9,7 +9,8 @@ obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o ...@@ -9,7 +9,8 @@ obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \ board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \ board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o board-mop500-u8500uib.o \
board-mop500-pins.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <plat/pincfg.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
static pin_cfg_t mop500_pins[] = {
/* SSP0 */
GPIO143_SSP0_CLK,
GPIO144_SSP0_FRM,
GPIO145_SSP0_RXD,
GPIO146_SSP0_TXD,
/* I2C */
GPIO147_I2C0_SCL,
GPIO148_I2C0_SDA,
GPIO16_I2C1_SCL,
GPIO17_I2C1_SDA,
GPIO10_I2C2_SDA,
GPIO11_I2C2_SCL,
GPIO229_I2C3_SDA,
GPIO230_I2C3_SCL,
/* SKE keypad */
GPIO153_KP_I7,
GPIO154_KP_I6,
GPIO155_KP_I5,
GPIO156_KP_I4,
GPIO157_KP_O7,
GPIO158_KP_O6,
GPIO159_KP_O5,
GPIO160_KP_O4,
GPIO161_KP_I3,
GPIO162_KP_I2,
GPIO163_KP_I1,
GPIO164_KP_I0,
GPIO165_KP_O3,
GPIO166_KP_O2,
GPIO167_KP_O1,
GPIO168_KP_O0,
/* GPIO_EXP_INT */
GPIO217_GPIO,
/* STMPE1601 IRQ */
GPIO218_GPIO | PIN_INPUT_PULLUP,
/* touch screen */
GPIO84_GPIO | PIN_INPUT_PULLUP,
/* USB OTG */
GPIO256_USB_NXT | PIN_PULL_DOWN,
GPIO257_USB_STP | PIN_PULL_UP,
GPIO258_USB_XCLK | PIN_PULL_DOWN,
GPIO259_USB_DIR | PIN_PULL_DOWN,
GPIO260_USB_DAT7 | PIN_PULL_DOWN,
GPIO261_USB_DAT6 | PIN_PULL_DOWN,
GPIO262_USB_DAT5 | PIN_PULL_DOWN,
GPIO263_USB_DAT4 | PIN_PULL_DOWN,
GPIO264_USB_DAT3 | PIN_PULL_DOWN,
GPIO265_USB_DAT2 | PIN_PULL_DOWN,
GPIO266_USB_DAT1 | PIN_PULL_DOWN,
GPIO267_USB_DAT0 | PIN_PULL_DOWN,
};
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins,
ARRAY_SIZE(mop500_pins));
}
...@@ -28,7 +28,6 @@ ...@@ -28,7 +28,6 @@
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <plat/pincfg.h>
#include <plat/i2c.h> #include <plat/i2c.h>
#include <plat/ste_dma40.h> #include <plat/ste_dma40.h>
...@@ -39,69 +38,9 @@ ...@@ -39,69 +38,9 @@
#include "ste-dma40-db8500.h" #include "ste-dma40-db8500.h"
#include "devices-db8500.h" #include "devices-db8500.h"
#include "pins-db8500.h"
#include "board-mop500.h" #include "board-mop500.h"
#include "board-mop500-regulators.h" #include "board-mop500-regulators.h"
static pin_cfg_t mop500_pins[] = {
/* SSP0 */
GPIO143_SSP0_CLK,
GPIO144_SSP0_FRM,
GPIO145_SSP0_RXD,
GPIO146_SSP0_TXD,
/* I2C */
GPIO147_I2C0_SCL,
GPIO148_I2C0_SDA,
GPIO16_I2C1_SCL,
GPIO17_I2C1_SDA,
GPIO10_I2C2_SDA,
GPIO11_I2C2_SCL,
GPIO229_I2C3_SDA,
GPIO230_I2C3_SCL,
/* SKE keypad */
GPIO153_KP_I7,
GPIO154_KP_I6,
GPIO155_KP_I5,
GPIO156_KP_I4,
GPIO157_KP_O7,
GPIO158_KP_O6,
GPIO159_KP_O5,
GPIO160_KP_O4,
GPIO161_KP_I3,
GPIO162_KP_I2,
GPIO163_KP_I1,
GPIO164_KP_I0,
GPIO165_KP_O3,
GPIO166_KP_O2,
GPIO167_KP_O1,
GPIO168_KP_O0,
/* GPIO_EXP_INT */
GPIO217_GPIO,
/* STMPE1601 IRQ */
GPIO218_GPIO | PIN_INPUT_PULLUP,
/* touch screen */
GPIO84_GPIO | PIN_INPUT_PULLUP,
/* USB OTG */
GPIO256_USB_NXT | PIN_PULL_DOWN,
GPIO257_USB_STP | PIN_PULL_UP,
GPIO258_USB_XCLK | PIN_PULL_DOWN,
GPIO259_USB_DIR | PIN_PULL_DOWN,
GPIO260_USB_DAT7 | PIN_PULL_DOWN,
GPIO261_USB_DAT6 | PIN_PULL_DOWN,
GPIO262_USB_DAT5 | PIN_PULL_DOWN,
GPIO263_USB_DAT4 | PIN_PULL_DOWN,
GPIO264_USB_DAT3 | PIN_PULL_DOWN,
GPIO265_USB_DAT2 | PIN_PULL_DOWN,
GPIO266_USB_DAT1 | PIN_PULL_DOWN,
GPIO267_USB_DAT0 | PIN_PULL_DOWN,
};
static struct ab8500_platform_data ab8500_platdata = { static struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE, .irq_base = MOP500_AB8500_IRQ_BASE,
.regulator = ab8500_regulators, .regulator = ab8500_regulators,
...@@ -444,7 +383,7 @@ static void __init u8500_init_machine(void) ...@@ -444,7 +383,7 @@ static void __init u8500_init_machine(void)
{ {
u8500_init_devices(); u8500_init_devices();
nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); mop500_pins_init();
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
......
...@@ -22,6 +22,7 @@ extern void mop500_sdi_init(void); ...@@ -22,6 +22,7 @@ extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void); extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void); void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void); void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n); unsigned n);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment