Skip to content

L
linux
Commit fe31eb67 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Remove quirk_via_abnormal_poweroff
  PCI: reset pci device state to unknown state for resume
  PCI: x86-64: mmconfig missing printk levels
  PCI: fix pci_fixup_video as it blows up on sparc64
  acpiphp: fix latch status
parents efbfe96c 3560cc5e
Hide whitespace changes
Inline Side-by-side
Showing with 147 additions and 81 deletions
arch/i386/pci/fixup.c
View file @ fe31eb67
......@@ -342,6 +342,61 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_r
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk );
/*
* Fixup to mark boot BIOS video selected by BIOS before it changes
*
* From information provided by "Jon Smirl" <jonsmirl@gmail.com>
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
* card will have it's BIOS copied to C0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
* is marked here since the boot video device will be the only enabled
* video device at this point.
*/
static void __devinit pci_fixup_video(struct pci_dev *pdev)
{
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
return;
/* Is VGA routed to us? */
bus = pdev->bus;
while (bus) {
bridge = bus->self;
/*
* From information provided by
* "David Miller" <davem@davemloft.net>
* The bridge control register is valid for PCI header
* type BRIDGE, or CARDBUS. Host to PCI controllers use
* PCI header type NORMAL.
*/
if (bridge
&&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
&config);
if (!(config & PCI_BRIDGE_CTL_VGA))
return;
}
bus = bus->parent;
}
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
/*
* Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
*
......
arch/ia64/pci/Makefile
View file @ fe31eb67
#
# Makefile for the ia64-specific parts of the pci bus
#
obj-y := pci.o
obj-y := pci.o fixup.o
arch/ia64/pci/fixup.c 0 → 100644
View file @ fe31eb67
/*
* Exceptions for specific devices. Usually work-arounds for fatal design flaws.
* Derived from fixup.c of i386 tree.
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/machvec.h>
/*
* Fixup to mark boot BIOS video selected by BIOS before it changes
*
* From information provided by "Jon Smirl" <jonsmirl@gmail.com>
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
* card will have it's BIOS copied to C0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
* is marked here since the boot video device will be the only enabled
* video device at this point.
*/
static void __devinit pci_fixup_video(struct pci_dev *pdev)
{
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
if ((strcmp(platform_name, "dig") != 0)
&& (strcmp(platform_name, "hpzx1") != 0))
return;
/* Maybe, this machine supports legacy memory map. */
if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
return;
/* Is VGA routed to us? */
bus = pdev->bus;
while (bus) {
bridge = bus->self;
/*
* From information provided by
* "David Miller" <davem@davemloft.net>
* The bridge control register is valid for PCI header
* type BRIDGE, or CARDBUS. Host to PCI controllers use
* PCI header type NORMAL.
*/
if (bridge
&&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
&config);
if (!(config & PCI_BRIDGE_CTL_VGA))
return;
}
bus = bus->parent;
}
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
arch/x86_64/pci/mmconfig.c
View file @ fe31eb67
......@@ -220,7 +220,7 @@ void __init pci_mmcfg_init(int type)
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk("PCI: Can not allocate memory for mmconfig structures\n");
printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
return;
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
......@@ -228,7 +228,8 @@ void __init pci_mmcfg_init(int type)
pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
MMCONFIG_APER_MAX);
if (!pci_mmcfg_virt[i].virt) {
printk("PCI: Cannot map mmconfig aperture for segment %d\n",
printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
"segment %d\n",
pci_mmcfg_config[i].pci_segment_group_number);
return;
}
......
drivers/pci/hotplug/acpiphp_glue.c
View file @ fe31eb67
......@@ -1807,8 +1807,8 @@ u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
/*
* latch closed: 1
* latch open: 0
* latch open: 1
* latch closed: 0
*/
u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
{
......@@ -1816,7 +1816,7 @@ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
sta = get_slot_status(slot);
return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0;
return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1;
}
......
drivers/pci/pci-driver.c
View file @ fe31eb67
......@@ -264,6 +264,13 @@ static int pci_device_remove(struct device * dev)
pci_dev->driver = NULL;
}
/*
* If the device is still on, set the power state as "unknown",
* since it might change by the next time we load the driver.
*/
if (pci_dev->current_state == PCI_D0)
pci_dev->current_state = PCI_UNKNOWN;
/*
* We would love to complain here if pci_dev->is_enabled is set, that
* the driver should have called pci_disable_device(), but the
......@@ -288,6 +295,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
suspend_report_result(drv->suspend, i);
} else {
pci_save_state(pci_dev);
/*
* mark its power state as "unknown", since we don't know if
* e.g. the BIOS will change its device state when we suspend.
*/
if (pci_dev->current_state == PCI_D0)
pci_dev->current_state = PCI_UNKNOWN;
}
return i;
}
......
drivers/pci/quirks.c
View file @ fe31eb67
......@@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id );
#ifdef CONFIG_ACPI_SLEEP
/*
* Some VIA systems boot with the abnormal status flag set. This can cause
* the BIOS to re-POST the system on resume rather than passing control
* back to the OS. Clear the flag on boot
*/
static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
{
u32 reg;
acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
&reg);
if (reg & 0x800) {
printk("Clearing abnormal poweroff flag\n");
acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
ACPI_REGISTER_PM1_STATUS,
(u16)0x800);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
#endif
/*
* CardBus controllers have a legacy base address that enables them
* to respond as i82365 pcmcia controllers. We don't want them to
......@@ -1619,52 +1592,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
/*
* Fixup to mark boot BIOS video selected by BIOS before it changes
*
* From information provided by "Jon Smirl" <jonsmirl@gmail.com>
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
* card will have it's BIOS copied to C0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
* is marked here since the boot video device will be the only enabled
* video device at this point.
*/
static void __devinit fixup_video(struct pci_dev *pdev)
{
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
return;
/* Is VGA routed to us? */
bus = pdev->bus;
while (bus) {
bridge = bus->self;
if (bridge) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
&config);
if (!(config & PCI_BRIDGE_CTL_VGA))
return;
}
bus = bus->parent;
}
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
while (f < end) {
......
drivers/pci/rom.c
View file @ fe31eb67
......@@ -72,8 +72,9 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
int last_image;
/*
* IORESOURCE_ROM_SHADOW set if the VGA enable bit of the Bridge Control
* register is set for embedded VGA.
* IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
* memory map if the VGA enable bit of the Bridge Control register is
* set for embedded VGA.
*/
if (res->flags & IORESOURCE_ROM_SHADOW) {
/* primary video rom always starts here */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7