Blackfin arch: make ADI board names consistent

Cc: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -49,7 +49,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "BF518F-EZBRD";
+const char bfin_board_name[] = "ADI BF518F-EZBRD";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -51,7 +51,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "BF526-EZBRD";
+const char bfin_board_name[] = "ADI BF526-EZBRD";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -54,7 +54,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF527-EZKIT";
+const char bfin_board_name[] = "ADI BF527-EZKIT";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -46,7 +46,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF533-EZKIT";
+const char bfin_board_name[] = "ADI BF533-EZKIT";
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {

arch/blackfin/mach-bf533/boards/stamp.c

@@ -49,7 +49,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF533-STAMP";
+const char bfin_board_name[] = "ADI BF533-STAMP";
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -50,7 +50,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "GENERIC Board";
+const char bfin_board_name[] = "UNKNOWN BOARD";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -49,7 +49,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "PNAV-1.0";
+const char bfin_board_name[] = "ADI PNAV-1.0";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf537/boards/stamp.c

@@ -55,7 +55,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF537-STAMP";
+const char bfin_board_name[] = "ADI BF537-STAMP";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -47,7 +47,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADSP-BF538-EZKIT";
+const char bfin_board_name[] = "ADI BF538-EZKIT";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -52,7 +52,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADSP-BF548-EZKIT";
+const char bfin_board_name[] = "ADI BF548-EZKIT";
 
 /*
  *  Driver needs to know address, irq and flag pin.

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -43,7 +43,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF561-EZKIT";
+const char bfin_board_name[] = "ADI BF561-EZKIT";
 
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 #include <linux/usb/isp1760.h>