Merge master.kernel.org:/home/dwmw2/BK/mtd-forlinus-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers/mtd/Kconfig

-# $Id: Config.in,v 1.74 2002/04/23 13:52:14 mag Exp $
+# $Id: Kconfig,v 1.3 2003/05/28 11:02:23 dwmw2 Exp $
 
 menu "Memory Technology Devices (MTD)"
 
@@ -199,13 +199,28 @@ config NFTL
 	  not use it.
 
 config NFTL_RW
-	bool "Write support for NFTL (BETA)"
+	bool "Write support for NFTL"
 	depends on NFTL
 	help
-	  If you're lucky, this will actually work. Don't whinge if it
-	  doesn't.  Send mail to the MTD mailing list
-	  <linux-mtd@lists.infradead.org> if you want to help to make it more
-	  reliable.
+	  Support for writing to the NAND Flash Translation Layer, as used
+	  on the DiskOnChip.
+
+config INFTL
+	tristate "INFTL (Inverse NAND Flash Translation Layer) support"
+	depends on MTD
+	---help---
+	  This provides support for the Inverse NAND Flash Translation 
+	  Layer which is used on M-Systems' newer DiskOnChip devices. It
+	  uses a kind of pseudo-file system on a flash device to emulate
+	  a block device with 512-byte sectors, on top of which you put
+	  a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on DiskOnChip
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
 
 source "drivers/mtd/chips/Kconfig"
 

drivers/mtd/Makefile

 #
 # Makefile for the memory technology device drivers.
 #
-# Based on:
-# $Id: Makefile,v 1.66 2002/04/23 13:52:14 mag Exp $
-
-obj-y           += chips/ maps/ devices/ nand/
+# $Id: Makefile.common,v 1.2 2003/05/23 11:38:29 dwmw2 Exp $
 
 #                       *** BIG UGLY NOTE ***
 #
@@ -27,14 +24,18 @@ obj-$(CONFIG_MTD)		+= mtdcore.o
 obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
 obj-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
-obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdline.o
+obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
 obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
 
 # 'Users' - code which presents functionality to userspace.
 obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
-obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
-obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o
-obj-$(CONFIG_FTL)		+= ftl.o
-obj-$(CONFIG_NFTL)		+= nftl.o
+obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o mtd_blkdevs.o
+obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o mtd_blkdevs.o
+obj-$(CONFIG_FTL)		+= ftl.o mtd_blkdevs.o
+obj-$(CONFIG_NFTL)		+= nftl.o mtd_blkdevs.o
+obj-$(CONFIG_INFTL)		+= inftl.o mtd_blkdevs.o
+
+nftl-objs		:= nftlcore.o nftlmount.o
+inftl-objs		:= inftlcore.o inftlmount.o
 
-nftl-objs	:= nftlcore.o nftlmount.o
+obj-y		+= chips/ maps/ devices/ nand/

drivers/mtd/afs.c

@@ -21,7 +21,7 @@
    This is access code for flashes using ARM's flash partitioning 
    standards.
 
-   $Id: afs.c,v 1.8 2002/05/04 08:49:09 rmk Exp $
+   $Id: afs.c,v 1.11 2003/05/16 17:08:24 dwmw2 Exp $
 
 ======================================================================*/
 
@@ -125,7 +125,9 @@ afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr)
 	return ret;
 }
 
-int parse_afs_partitions(struct mtd_info *mtd, struct mtd_partition **pparts)
+static int parse_afs_partitions(struct mtd_info *mtd, 
+                         struct mtd_partition **pparts,
+                         unsigned long origin)
 {
 	struct mtd_partition *parts;
 	u_int mask, off, idx, sz;
@@ -227,7 +229,25 @@ int parse_afs_partitions(struct mtd_info *mtd, struct mtd_partition **pparts)
 	return idx ? idx : ret;
 }
 
-EXPORT_SYMBOL(parse_afs_partitions);
+static struct mtd_part_parser afs_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_afs_partitions,
+	.name = "afs",
+};
+
+static int __init afs_parser_init(void)
+{
+	return register_mtd_parser(&afs_parser);
+}
+
+static void __exit afs_parser_exit(void)
+{
+	deregister_mtd_parser(&afs_parser);
+}
+
+module_init(afs_parser_init);
+module_exit(afs_parser_exit);
+
 
 MODULE_AUTHOR("ARM Ltd");
 MODULE_DESCRIPTION("ARM Firmware Suite partition parser");

drivers/mtd/chips/Kconfig

-# drivers/mtd/chips/Config.in
-# $Id: Config.in,v 1.12 2001/09/23 15:35:21 dwmw2 Exp $
+# drivers/mtd/chips/Kconfig
+# $Id: Kconfig,v 1.3 2003/05/28 15:13:24 dwmw2 Exp $
 
 menu "RAM/ROM/Flash chip drivers"
 	depends on MTD!=n
@@ -15,7 +15,6 @@ config MTD_CFI
 	  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
 	  for more information on CFI.
 
-#dep_tristate '  Detect non-CFI Intel-compatible flash chips' CONFIG_MTD_INTELPROBE $CONFIG_MTD
 config MTD_JEDECPROBE
 	tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
 	depends on MTD
@@ -107,6 +106,13 @@ config MTD_CFI_B4
 	  If you wish to support CFI devices on a physical bus which is
 	  32 bits wide, say 'Y'.
 
+config MTD_CFI_B8
+	bool "Support 64-bit buswidth"
+	depends on MTD_CFI_GEOMETRY
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  64 bits wide, say 'Y'.
+
 config MTD_CFI_I1
 	bool "Support 1-chip flash interleave" if !MTD_CFI_B1
 	depends on MTD_CFI_GEOMETRY
@@ -129,6 +135,13 @@ config MTD_CFI_I4
 	  If your flash chips are interleaved in fours - i.e. you have four
 	  flash chips addressed by each bus cycle, then say 'Y'.
 
+config MTD_CFI_I8
+	bool "Support 8-chip flash interleave"
+	depends on MTD_CFI_GEOMETRY
+	help
+	  If your flash chips are interleaved in eights - i.e. you have eight
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
 config MTD_CFI_INTELEXT
 	tristate "Support for Intel/Sharp flash chips"
 	depends on MTD_GEN_PROBE
@@ -145,7 +158,15 @@ config MTD_CFI_AMDSTD
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
 	  provides support for one of those command sets, used on chips 
-	  chips including the AMD Am29LV320.
+	  including the AMD Am29LV320.
+
+config MTD_CFI_STAA
+	tristate "Support for ST (Advanced Architecture) flash chips"
+	depends on MTD_GEN_PROBE
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for one of those command sets.
 
 config MTD_RAM
 	tristate "Support for RAM chips in bus mapping"
@@ -177,10 +198,10 @@ config MTD_OBSOLETE_CHIPS
 	help
 	  This option does not enable any code directly, but will allow you to
 	  select some other chip drivers which are now considered obsolete,
-	  because the generic CONFIG_JEDEC_PROBE code above should now detect
+	  because the generic CONFIG_JEDECPROBE code above should now detect
 	  the chips which are supported by these drivers, and allow the generic
 	  CFI-compatible drivers to drive the chips. Say 'N' here unless you have
-	  already tried the CONFIG_JEDEC_PROBE method and reported its failure
+	  already tried the CONFIG_JEDECPROBE method and reported its failure
 	  to the MTD mailing list at <linux-mtd@lists.infradead.org>
 
 config MTD_AMDSTD
@@ -209,8 +230,7 @@ config MTD_JEDEC
 	  programming flash.  It is commonly used in older AMD chips.  It is
 	  only called JEDEC because the JEDEC association
 	  <http://www.jedec.org/> distributes the identification codes for the
-	  chips. WARNING!!!! This code does not compile and is incomplete as
-	  are the specific JEDEC devices drivers.
+	  chips.
 
 endmenu
 

drivers/mtd/chips/Makefile

 #
 # linux/drivers/chips/Makefile
 #
-# $Id: Makefile,v 1.7 2001/10/05 06:53:51 dwmw2 Exp $
+# $Id: Makefile.common,v 1.1 2003/05/21 15:00:01 dwmw2 Exp $
 
 #                       *** BIG UGLY NOTE ***
 #
@@ -13,10 +13,10 @@
 obj-$(CONFIG_MTD)		+= chipreg.o
 obj-$(CONFIG_MTD_AMDSTD)	+= amd_flash.o 
 obj-$(CONFIG_MTD_CFI)		+= cfi_probe.o
+obj-$(CONFIG_MTD_CFI_STAA)	+= cfi_cmdset_0020.o
 obj-$(CONFIG_MTD_CFI_AMDSTD)	+= cfi_cmdset_0002.o
 obj-$(CONFIG_MTD_CFI_INTELEXT)	+= cfi_cmdset_0001.o
 obj-$(CONFIG_MTD_GEN_PROBE)	+= gen_probe.o
-obj-$(CONFIG_MTD_INTELPROBE)	+= intel_probe.o
 obj-$(CONFIG_MTD_JEDEC)		+= jedec.o
 obj-$(CONFIG_MTD_JEDECPROBE)	+= jedec_probe.o
 obj-$(CONFIG_MTD_RAM)		+= map_ram.o