powerpc/64s/interrupt: handle MSR EE and RI in interrupt entry wrapper

The mtmsrd to enable MSR[RI] can be combined with the mtmsrd to enable
MSR[EE] in interrupt entry code, for those interrupts which enable EE.
This helps performance of important synchronous interrupts (e.g., page
faults).

This is similar to what commit dd152f70 ("powerpc/64s: system call
avoid setting MSR[RI] until we set MSR[EE]") does for system calls.

Do this by enabling EE and RI together at the beginning of the entry
wrapper if PACA_IRQ_HARD_DIS is clear, and only enabling RI if it is
set.

Asynchronous interrupts set PACA_IRQ_HARD_DIS, but synchronous ones
leave it unchanged, so by default they always get EE=1 unless they have
interrupted a caller that is hard disabled. When the sync interrupt
later calls interrupt_cond_local_irq_enable(), it will not require
another mtmsrd because MSR[EE] was already enabled here.

This avoids one mtmsrd L=1 for synchronous interrupts on 64s, which
saves about 20 cycles on POWER9. And for kernel-mode interrupts, both
synchronous and asynchronous, this saves an additional 40 cycles due to
the mtmsrd being moved ahead of mfspr SPRN_AMR, which prevents a SPR
scoreboard stall.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210922145452.352571-3-npiggin@gmail.com

arch/powerpc/include/asm/interrupt.h

@@ -149,8 +149,14 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
 #endif
 
 #ifdef CONFIG_PPC64
-	if (irq_soft_mask_set_return(IRQS_ALL_DISABLED) == IRQS_ENABLED)
-		trace_hardirqs_off();
+	bool trace_enable = false;
+
+	if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS)) {
+		if (irq_soft_mask_set_return(IRQS_ALL_DISABLED) == IRQS_ENABLED)
+			trace_enable = true;
+	} else {
+		irq_soft_mask_set(IRQS_ALL_DISABLED);
+	}
 
 	/*
 	 * If the interrupt was taken with HARD_DIS clear, then enable MSR[EE].
@@ -164,8 +170,14 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
 		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
 			BUG_ON(!(regs->msr & MSR_EE));
 		__hard_irq_enable();
+	} else {
+		__hard_RI_enable();
 	}
 
+	/* Do this when RI=1 because it can cause SLB faults */
+	if (trace_enable)
+		trace_hardirqs_off();
+
 	if (user_mode(regs)) {
 		kuap_lock();
 		CT_WARN_ON(ct_state() != CONTEXT_USER);
@@ -220,13 +232,16 @@ static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct in
 	/* Ensure interrupt_enter_prepare does not enable MSR[EE] */
 	local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 #endif
+	interrupt_enter_prepare(regs, state);
 #ifdef CONFIG_PPC_BOOK3S_64
+	/*
+	 * RI=1 is set by interrupt_enter_prepare, so this thread flags access
+	 * has to come afterward (it can cause SLB faults).
+	 */
 	if (cpu_has_feature(CPU_FTR_CTRL) &&
 	    !test_thread_local_flags(_TLF_RUNLATCH))
 		__ppc64_runlatch_on();
 #endif
-
-	interrupt_enter_prepare(regs, state);
 	irq_enter();
 }
 
@@ -296,6 +311,8 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte
 		regs->softe = IRQS_ALL_DISABLED;
 	}
 
+	__hard_RI_enable();
+
 	/* Don't do any per-CPU operations until interrupt state is fixed */
 
 	if (nmi_disables_ftrace(regs)) {
@@ -393,6 +410,8 @@ interrupt_handler long func(struct pt_regs *regs)			\
 {									\
 	long ret;							\
 									\
+	__hard_RI_enable();						\
+									\
 	ret = ____##func (regs);					\
 									\
 	return ret;							\

arch/powerpc/kernel/exceptions-64s.S

@@ -113,7 +113,6 @@ name:
 #define IISIDE		.L_IISIDE_\name\()	/* Uses SRR0/1 not DAR/DSISR */
 #define IDAR		.L_IDAR_\name\()	/* Uses DAR (or SRR0) */
 #define IDSISR		.L_IDSISR_\name\()	/* Uses DSISR (or SRR1) */
-#define ISET_RI		.L_ISET_RI_\name\()	/* Run common code w/ MSR[RI]=1 */
 #define IBRANCH_TO_COMMON	.L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
 #define IREALMODE_COMMON	.L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
 #define IMASK		.L_IMASK_\name\()	/* IRQ soft-mask bit */
@@ -157,9 +156,6 @@ do_define_int n
 	.ifndef IDSISR
 		IDSISR=0
 	.endif
-	.ifndef ISET_RI
-		ISET_RI=1
-	.endif
 	.ifndef IBRANCH_TO_COMMON
 		IBRANCH_TO_COMMON=1
 	.endif
@@ -512,11 +508,6 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real)
 	stb	r10,PACASRR_VALID(r13)
 	.endif
 
-	.if ISET_RI
-	li	r10,MSR_RI
-	mtmsrd	r10,1			/* Set MSR_RI */
-	.endif
-
 	.if ISTACK
 	.if IKUAP
 	kuap_save_amr_and_lock r9, r10, cr1, cr0
@@ -900,11 +891,6 @@ INT_DEFINE_BEGIN(system_reset)
 	IVEC=0x100
 	IAREA=PACA_EXNMI
 	IVIRT=0 /* no virt entry point */
-	/*
-	 * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is
-	 * being used, so a nested NMI exception would corrupt it.
-	 */
-	ISET_RI=0
 	ISTACK=0
 	IKVM_REAL=1
 INT_DEFINE_END(system_reset)
@@ -977,16 +963,14 @@ TRAMP_REAL_BEGIN(system_reset_fwnmi)
 EXC_COMMON_BEGIN(system_reset_common)
 	__GEN_COMMON_ENTRY system_reset
 	/*
-	 * Increment paca->in_nmi then enable MSR_RI. SLB or MCE will be able
-	 * to recover, but nested NMI will notice in_nmi and not recover
-	 * because of the use of the NMI stack. in_nmi reentrancy is tested in
-	 * system_reset_exception.
+	 * Increment paca->in_nmi. When the interrupt entry wrapper later
+	 * enable MSR_RI, then SLB or MCE will be able to recover, but a nested
+	 * NMI will notice in_nmi and not recover because of the use of the NMI
+	 * stack. in_nmi reentrancy is tested in system_reset_exception.
 	 */
 	lhz	r10,PACA_IN_NMI(r13)
 	addi	r10,r10,1
 	sth	r10,PACA_IN_NMI(r13)
-	li	r10,MSR_RI
-	mtmsrd 	r10,1
 
 	mr	r10,r1
 	ld	r1,PACA_NMI_EMERG_SP(r13)
@@ -1060,12 +1044,6 @@ INT_DEFINE_BEGIN(machine_check_early)
 	IAREA=PACA_EXMC
 	IVIRT=0 /* no virt entry point */
 	IREALMODE_COMMON=1
-	/*
-	 * MSR_RI is not enabled, because PACA_EXMC is being used, so a
-	 * nested machine check corrupts it. machine_check_common enables
-	 * MSR_RI.
-	 */
-	ISET_RI=0
 	ISTACK=0
 	IDAR=1
 	IDSISR=1
@@ -1076,7 +1054,6 @@ INT_DEFINE_BEGIN(machine_check)
 	IVEC=0x200
 	IAREA=PACA_EXMC
 	IVIRT=0 /* no virt entry point */
-	ISET_RI=0
 	IDAR=1
 	IDSISR=1
 	IKVM_REAL=1
@@ -1146,9 +1123,6 @@ EXC_COMMON_BEGIN(machine_check_early_common)
 BEGIN_FTR_SECTION
 	bl	enable_machine_check
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
-	li	r10,MSR_RI
-	mtmsrd	r10,1
-
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_early
 	std	r3,RESULT(r1)	/* Save result */
@@ -1236,10 +1210,6 @@ EXC_COMMON_BEGIN(machine_check_common)
 	 * save area: PACA_EXMC instead of PACA_EXGEN.
 	 */
 	GEN_COMMON machine_check
-
-	/* Enable MSR_RI when finished with PACA_EXMC */
-	li	r10,MSR_RI
-	mtmsrd 	r10,1
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_exception_async
 	b	interrupt_return_srr

arch/powerpc/kernel/fpu.S

@@ -81,7 +81,12 @@ EXPORT_SYMBOL(store_fp_state)
  */
 _GLOBAL(load_up_fpu)
 	mfmsr	r5
+#ifdef CONFIG_PPC_BOOK3S_64
+	/* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+	ori	r5,r5,MSR_FP|MSR_RI
+#else
 	ori	r5,r5,MSR_FP
+#endif
 #ifdef CONFIG_VSX
 BEGIN_FTR_SECTION
 	oris	r5,r5,MSR_VSX@h

arch/powerpc/kernel/vector.S

@@ -47,6 +47,10 @@ EXPORT_SYMBOL(store_vr_state)
  */
 _GLOBAL(load_up_altivec)
 	mfmsr	r5			/* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3S_64
+	/* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+	ori	r5,r5,MSR_RI
+#endif
 	oris	r5,r5,MSR_VEC@h
 	MTMSRD(r5)			/* enable use of AltiVec now */
 	isync
@@ -126,6 +130,12 @@ _GLOBAL(load_up_vsx)
 	andis.	r5,r12,MSR_VEC@h
 	beql+	load_up_altivec		/* skip if already loaded */
 
+#ifdef CONFIG_PPC_BOOK3S_64
+	/* interrupt doesn't set MSR[RI] and HPT can fault on current access */
+	li	r5,MSR_RI
+	mtmsrd	r5,1
+#endif
+
 	ld	r4,PACACURRENT(r13)
 	addi	r4,r4,THREAD		/* Get THREAD */
 	li	r6,1