- 02 Aug, 2016 40 commits
-
-
Kees Cook authored
A double-bug exists in the bss calculation code, where an overflow can happen in the "last_bss - elf_bss" calculation, but vm_brk internally aligns the argument, underflowing it, wrapping back around safe. We shouldn't depend on these bugs staying in sync, so this cleans up the bss padding handling to avoid the overflow. This moves the bss padzero() before the last_bss > elf_bss case, since the zero-filling of the ELF_PAGE should have nothing to do with the relationship of last_bss and elf_bss: any trailing portion should be zeroed, and a zero size is already handled by padzero(). Then it handles the math on elf_bss vs last_bss correctly. These need to both be ELF_PAGE aligned to get the comparison correct, since that's the expected granularity of the mappings. Since elf_bss already had alignment-based padding happen in padzero(), the "start" of the new vm_brk() should be moved forward as done in the original code. However, since the "end" of the vm_brk() area will already become PAGE_ALIGNed in vm_brk() then last_bss should get aligned here to avoid hiding it as a side-effect. Additionally makes a cosmetic change to the initial last_bss calculation so it's easier to read in comparison to the load_addr calculation above it (i.e. the only difference is p_filesz vs p_memsz). Link: http://lkml.kernel.org/r/1468014494-25291-2-git-send-email-keescook@chromium.orgSigned-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Hector Marco-Gisbert <hecmargi@upv.es> Cc: Ismael Ripoll Ripoll <iripoll@upv.es> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Allen Hubbe authored
If no filenames are given, then read the patch from stdin. Link: http://lkml.kernel.org/r/a8784f291ccb5067361992bf5d41ff6cfb0ce5cb.1469830917.git.allenbh@gmail.comSigned-off-by:
Allen Hubbe <allenbh@gmail.com> Acked-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Allen Hubbe authored
Signoff was not checked if the filename is '-', indicating reading the patch from stdin. Commands such as the below would not warn about a missing signoff, because the patch filename is '-'. This change allows checkpatch to warn about a missing signoff, even if the input filename is '-', but only if the patch has a commit message. git show --pretty=email | scripts/checkpatch.pl - A more common use of checkpatch with stdin is for piping git diff through checkpatch. The diff output would not contain a commit message, and therefore it would not contain a signoff line. For this common use case, a warning should not be printed about the missing signoff. With this change we will only warn about a missing signoff if the input contains a commit message. git diff | scripts/checkpatch.pl - Before this patch, a workaround for the first command was to refer to stdin by a name other than '-'. The workaround is not an elegant solution, because elsewhere checkpatch uses the fact that filename equals '-', such as in setting '$vname' to 'Your patch' for stdin. The command below would report "/dev/stdin has style problems" instead of "Your patch has style problems." git show --pretty=email | scripts/checkpatch.pl /dev/stdin Link: http://lkml.kernel.org/r/48be31e414bddc65bccfa6b1322359be9ba032eb.1469670589.git.allenbh@gmail.comSigned-off-by:
-
Joe Perches authored
Fix false positive warning of identifiers ending in signed with an = assignment of WARNING: Prefer 'signed int' to bare use of 'signed'. Link: http://lkml.kernel.org/r/6a0e24c3e9102337528ecfcbbe91a0eb5b4820ed.1469529497.git.joe@perches.comSigned-off-by:
Alan Douglas <alanjhd@gmail.com> Acked-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Tomas Winkler authored
BIT macro cannot be exported to UAPI, don't complain about it. Link: http://lkml.kernel.org/r/1468707033-16173-1-git-send-email-tomas.winkler@intel.comSigned-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
-
Joe Perches authored
Using \b isn't good enough to isolate what appears to be a commit id in a commit message. Make sure there is a space or a quote like character after a continuous run of hexadecimal characters that could be a commit id. Link: http://lkml.kernel.org/r/fdd22b47463a21c21132edbb8aa35e372950a1e6.1468869915.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Sanitise the lines that contain c99 comments so that the error doesn't get emitted. Link: http://lkml.kernel.org/r/d4d22c34ad7bcc1bceb52f0742f76b7a6d585235.1468368420.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
These are also possible single line uses that exceed the generic maximum line length (typically 80 columns) Link: http://lkml.kernel.org/r/32a6a85fbd6161f1bb55ce176a464e44591afc5b.1468368420.git.joe@perches.comSigned-off-by:
-
Stephen Boyd authored
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.orgSigned-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Vikram Mulukutla authored
Some low memory systems with complex peripherals cannot afford to have the relatively large firmware images taking up valuable memory during suspend and resume. Change the internal implementation of firmware_class to disallow caching based on a configurable option. In the near future, variants of request_firmware will take advantage of this feature. Link: http://lkml.kernel.org/r/20160607164741.31849-3-stephen.boyd@linaro.org [stephen.boyd@linaro.org: Drop firmware_desc design and use flags] Signed-off-by:
Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This design creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. This patch sets adds support to the request firmware API to load the firmware directly into a pre-allocated buffer, skipping the intermediate copying step and alleviating memory pressure during firmware loading. The drawback is that we can't use the firmware caching feature because the memory for the firmware cache is not managed by the firmware layer. This patch (of 3): We use similar structured code to read and write the kmapped firmware pages. The only difference is read copies from the kmap region and write copies to it. Consolidate this into one function to reduce duplication. Link: http://lkml.kernel.org/r/20160607164741.31849-2-stephen.boyd@linaro.orgSigned-off-by:
-
Ross Zwisler authored
The bottom two bits of radix tree entries are reserved for special use by the radix tree code itself. A comment detailing their usage was added by commit 3bcadd6f ("radix-tree: free up the bottom bit of exceptional entries for reuse") This comment states that if the bottom two bits are '11', this means that this is a locked exceptional entry. It turns out that this bit combination was never actually used. Radix tree locking for DAX was indeed implemented, but it actually used the third LSB: /* We use lowest available exceptional entry bit for locking */ #define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT) This locking code was also made specific to the DAX code instead of being generally implemented in radix-tree.h. So, fix the comment. Link: http://lkml.kernel.org/r/1468997731-2155-1-git-send-email-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The crc32 test function measures the elapsed time in nanoseconds, but uses 'struct timespec' for that. We want to remove timespec from the kernel for y2038 compatibility, and ktime_get_ns() also helps make the code simpler here. It is also slightly better to use monontonic time, as we are only interested in the time difference. Link: http://lkml.kernel.org/r/20160617143932.3289626-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: "David S . Miller" <davem@davemloft.net> Signed-off-by:
-
Sebastian Ott authored
When a large enough area in the iommu bitmap is found but would span a boundary we continue the search starting from the next bit position. For large allocations this can lead to several useless invocations of bitmap_find_next_zero_area() and iommu_is_span_boundary(). Continue the search from the start of the next segment (which is the next bit position such that we'll not cross the same segment boundary again). Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1606081910070.3211@schleppiSigned-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Joe Perches authored
If a vcs is used, look to see if the vcs tracks the file specified and so the -f option becomes optional. Link: http://lkml.kernel.org/r/7c86a8df0d48770c45778a43b6b3e4627b2a90ee.1469746395.git.joe@perches.comSigned-off-by:
-
Borislav Petkov authored
Add a "printk.devkmsg" kernel command line parameter which controls how userspace writes into /dev/kmsg. It has three options: * ratelimit - ratelimit logging from userspace. * on - unlimited logging from userspace * off - logging from userspace gets ignored The default setting is to ratelimit the messages written to it. This changes the kernel default setting of "on" to "ratelimit" and we do that because we want to keep userspace spamming /dev/kmsg to sane levels. This is especially moot when a small kernel log buffer wraps around and messages get lost. So the ratelimiting setting should be a sane setting where kernel messages should have a bit higher chance of survival from all the spamming. It additionally does not limit logging to /dev/kmsg while the system is booting if we haven't disabled it on the command line. Furthermore, we can control the logging from a lower priority sysctl interface - kernel.printk_devkmsg. That interface will succeed only if printk.devkmsg *hasn't* been supplied on the command line. If it has, then printk.devkmsg is a one-time setting which remains for the duration of the system lifetime. This "locking" of the setting is to prevent userspace from changing the logging on us through sysctl(2). This patch is based on previous patches from Linus and Steven. [bp@suse.de: fixes] Link: http://lkml.kernel.org/r/20160719072344.GC25563@nazgul.tnic Link: http://lkml.kernel.org/r/20160716061745.15795-3-bp@alien8.deSigned-off-by:
Borislav Petkov <bp@suse.de> Cc: Dave Young <dyoung@redhat.com> Cc: Franck Bui <fbui@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Borislav Petkov authored
Extend the ratelimiting facility to print the amount of suppressed lines when it is being released. This use case is aimed at short-termed, burst-like users for which we want to output the suppressed lines stats only once, after it has been disposed of. For an example, see /dev/kmsg usage in a follow-on patch. Also, change the printk() line we issue on release to not use "callbacks" as it is misleading: we're not suppressing callbacks but printk() calls. This has been separated from a previous patch by Linus. Link: http://lkml.kernel.org/r/20160716061745.15795-2-bp@alien8.deSigned-off-by:
-
Borislav Petkov authored
Move the DRIVER_NAME macro definition before the first usage site and fix build error. Link: http://lkml.kernel.org/r/20160801163937.GA28119@nazgul.tnicSigned-off-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Christoph Hellwig authored
asm-generic headers are generic implementations for architecture specific code and should not be included by common code. Thus use the asm/ version of sections.h to get at the linker sections. Link: http://lkml.kernel.org/r/1468285008-7331-1-git-send-email-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Sergey Senozhatsky authored
Messages' levels and console log level are inspected when the actual printing occurs, which may provoke console_unlock() and console_cont_flush() to waste CPU cycles on every message that has loglevel above the current console_loglevel. Schematically, console_unlock() does the following: console_unlock() { ... for (;;) { ... raw_spin_lock_irqsave(&logbuf_lock, flags); skip: msg = log_from_idx(console_idx); if (msg->flags & LOG_NOCONS) { ... goto skip; } level = msg->level; len += msg_print_text(); >> sprintfs memcpy, etc. if (nr_ext_console_drivers) { ext_len = msg_print_ext_header(); >> scnprintf ext_len += msg_print_ext_body(); >> scnprintfs etc. } ... raw_spin_unlock(&logbuf_lock); call_console_drivers(level, ext_text, ext_len, text, len) { if (level >= console_loglevel && >> drop the message !ignore_loglevel) return; console->write(...); } local_irq_restore(flags); } ... } The thing here is this deferred `level >= console_loglevel' check. We are wasting CPU cycles on sprintfs/memcpy/etc. preparing the messages that we will eventually drop. This can be huge when we register a new CON_PRINTBUFFER console, for instance. For every such a console register_console() resets the console_seq, console_idx, console_prev and sets a `exclusive console' pointer to replay the log buffer to that just-registered console. And there can be a lot of messages to replay, in the worst case most of which can be dropped after console_loglevel test. We know messages' levels long before we call msg_print_text() and friends, so we can just move console_loglevel check out of call_console_drivers() and format a new message only if we are sure that it won't be dropped. The patch factors out loglevel check into suppress_message_printing() function and tests message->level and console_loglevel before formatting functions in console_unlock() and console_cont_flush() are getting executed. This improves things not only for exclusive CON_PRINTBUFFER consoles, but for every console_unlock() that attempts to print a message of level above the console_loglevel. Link: http://lkml.kernel.org/r/20160627135012.8229-1-sergey.senozhatsky@gmail.comSigned-off-by:Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by:
-
Joe Perches authored
Using functions instead of macros can reduce overall code size by eliminating unnecessary "KERN_SOH<digit>" prefixes from format strings. defconfig x86-64: $ size vmlinux* text data bss dec hex filename 10193570 4331464 1105920 15630954 ee826a vmlinux.new 10192623 4335560 1105920 15634103 ee8eb7 vmlinux.old As the return value are unimportant and unused in the kernel tree, these new functions return void. Miscellanea: - change pr_<level> macros to call new __pr_<level> functions - change vprintk_nmi and vprintk_default to add LOGLEVEL_<level> argument [akpm@linux-foundation.org: fix LOGLEVEL_INFO, per Joe] Link: http://lkml.kernel.org/r/e16cc34479dfefcae37c98b481e6646f0f69efc3.1466718827.git.joe@perches.comSigned-off-by: -
Sergey Senozhatsky authored
A trivial cosmetic change: interrupt.h header is redundant since commit 6b898c07 ("console: use might_sleep in console_lock"). Link: http://lkml.kernel.org/r/20160620132847.21930-1-sergey.senozhatsky@gmail.comSigned-off-by:
-
Luis de Bethencourt authored
kernel.h header doesn't directly use dynamic debug, instead we can include it in module.c (which used it via kernel.h). printk.h only uses it if CONFIG_DYNAMIC_DEBUG is on, changing the inclusion to only happen in that case. Link: http://lkml.kernel.org/r/1468429793-16917-1-git-send-email-luisbg@osg.samsung.com [luisbg@osg.samsung.com: include dynamic_debug.h in drb_int.h] Link: http://lkml.kernel.org/r/1468447828-18558-2-git-send-email-luisbg@osg.samsung.comSigned-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Oleg Nesterov authored
Change task_work_cancel() to use lockless_dereference(), this is what the code really wants but we didn't have this helper when it was written. Also add the fast-path task->task_works == NULL check, in the likely case this task has no pending works and we can avoid spin_lock(task->pi_lock). While at it, change other users of ACCESS_ONCE() to use READ_ONCE(). Link: http://lkml.kernel.org/r/20160610150042.GA13868@redhat.comSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Chen Gang authored
For pure bool function's return value, bool is a little better more or less than int. Link: http://lkml.kernel.org/r/1469331815-2026-1-git-send-email-chengang@emindsoft.com.cnSigned-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Linus Lüssing authored
For one thing, summarizes all non-umlaut versions into the umlaut one (Linus Luessing -> Linus Lüssing). For another, maps obsolete email addresses to the current @c0d3.blue one. Link: http://lkml.kernel.org/r/1467805371-2773-1-git-send-email-linus.luessing@c0d3.blueSigned-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Alexey Dobriyan authored
Don't user forward declarations of internal kernel structures in headers exported to userspace. Move "struct completion;". Move "struct task_struct;". Link: http://lkml.kernel.org/r/20160713215808.GA22486@p183.telecom.bySigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Fabian Frederick authored
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.beSigned-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
NeilBrown authored
When alloc_disk(0) is used the ->major number is completely ignored. All devices are allocated with a major of BLOCK_EXT_MAJOR. So remove registration and deregistration of 'major'. Link: http://lkml.kernel.org/r/20160602064318.4403.49955.stgit@nobleSigned-off-by:
NeilBrown <neilb@suse.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Richard Weinberger authored
UML is a bit special since it does not have iomem nor dma. That means a lot of drivers will not build if they miss a dependency on HAS_IOMEM. s390 used to have the same issues but since it gained PCI support UML is the only stranger. We are tired of patching dozens of new drivers after every merge window just to un-break allmod/yesconfig UML builds. One could argue that a decent driver has to know on what it depends and therefore a missing HAS_IOMEM dependency is a clear driver bug. But the dependency not obvious and not everyone does UML builds with COMPILE_TEST enabled when developing a device driver. A possible solution to make these builds succeed on UML would be providing stub functions for ioremap() and friends which fail upon runtime. Another one is simply disabling COMPILE_TEST for UML. Since it is the least hassle and does not force use to fake iomem support let's do the latter. Link: http://lkml.kernel.org/r/1466152995-28367-1-git-send-email-richard@nod.atSigned-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
-
Valdis Kletnieks authored
Suppress a bunch of warnings of the form: fs/proc/task_mmu.c: In function 'show_smap_vma_flags': fs/proc/task_mmu.c:635:22: warning: initialized field overwritten [-Wt override-init] [ilog2(VM_READ)] = "rd", ^~~~ fs/proc/task_mmu.c:635:22: note: (near initialization for 'mnemonics[0]') They happen because of the way we intentionally build the table, so silence the warning when building with 'make W=1'. Link: http://lkml.kernel.org/r/8727.1470022083@turing-police.cc.vt.eduSigned-off-by:Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Arnd Bergmann authored
/proc/stat shows (among lots of other things) the current boottime (i.e. number of seconds since boot). While a 32-bit number is sufficient for this particular case, we want to get rid of the 'struct timespec' suffers from a 32-bit overflow in 2038. This changes the code to use a struct timespec64, which is known to be safe in all cases. Link: http://lkml.kernel.org/r/20160617201247.2292101-1-arnd@arndb.deSigned-off-by:
-
Oleg Nesterov authored
This was needed before to ensure that ->signal != 0 and do_each_thread() is safe, see commit b95c35e7 ("oom: fix the unsafe usage of badness() in proc_oom_score()") for details. Today tsk->signal can't go away and for_each_thread(tsk) is always safe. Link: http://lkml.kernel.org/r/20160608211921.GA15508@redhat.comSigned-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Luis de Bethencourt authored
Salah Triki and Luis de Bethencourt are taking over maintainership of befs. Link: http://lkml.kernel.org/r/1469651079-32455-1-git-send-email-luisbg@osg.samsung.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
seokhoon.yoon authored
cgroup's document path is changed to "cgroup-v1". update it. Link: http://lkml.kernel.org/r/1470148443-6509-1-git-send-email-iamyooon@gmail.comSigned-off-by:
seokhoon.yoon <iamyooon@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Nicolas Iooss authored
handle_object_size_mismatch() used %pk to format a kernel pointer with pr_err(). This seemed to be a misspelling for %pK, but using this to format a kernel pointer does not make much sence here. Therefore use %p instead, like in handle_missaligned_access(). Link: http://lkml.kernel.org/r/20160730083010.11569-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Fabian Frederick authored
Commit 53dad6d3 ("ipc: fix race with LSMs") updated ipc_rcu_putref() to receive rcu freeing function but used generic ipc_rcu_free() instead of msg_rcu_free() which does security cleaning. Running LTP msgsnd06 with kmemleak gives the following: cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88003c0a11f8 (size 8): comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s) hex dump (first 8 bytes): 1b 00 00 00 01 00 00 00 ........ backtrace: kmemleak_alloc+0x23/0x40 kmem_cache_alloc_trace+0xe1/0x180 selinux_msg_queue_alloc_security+0x3f/0xd0 security_msg_queue_alloc+0x2e/0x40 newque+0x4e/0x150 ipcget+0x159/0x1b0 SyS_msgget+0x39/0x40 entry_SYSCALL_64_fastpath+0x13/0x8f Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to only use ipc_rcu_free in case of security allocation failure in newary() Fixes: 53dad6d3 ("ipc: fix race with LSMs") Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.beSigned-off-by:
-
Vladimir Davydov authored
We must call shrink_slab() for each memory cgroup on both global and memcg reclaim in shrink_node_memcg(). Commit d71df22b55099 accidentally changed that so that now shrink_slab() is only called with memcg != NULL on memcg reclaim. As a result, memcg-aware shrinkers (including dentry/inode) are never invoked on global reclaim. Fix that. Fixes: b2e18757 ("mm, vmscan: begin reclaiming pages on a per-node basis") Link: http://lkml.kernel.org/r/1470056590-7177-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Vladimir Davydov authored
Radix trees may be used not only for storing page cache pages, so unconditionally accounting radix tree nodes to the current memory cgroup is bad: if a radix tree node is used for storing data shared among different cgroups we risk pinning dead memory cgroups forever. So let's only account radix tree nodes if it was explicitly requested by passing __GFP_ACCOUNT to INIT_RADIX_TREE. Currently, we only want to account page cache entries, so mark mapping->page_tree so. Fixes: 58e698af ("radix-tree: account radix_tree_node to memory cgroup") Link: http://lkml.kernel.org/r/1470057188-7864-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by:
-
Alexander Potapenko authored
If the total amount of memory assigned to quarantine is less than the amount of memory assigned to per-cpu quarantines, |new_quarantine_size| may overflow. Instead, set it to zero. [akpm@linux-foundation.org: cleanup: use WARN_ONCE return value] Link: http://lkml.kernel.org/r/1470063563-96266-1-git-send-email-glider@google.com Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation") Signed-off-by:
Alexander Potapenko <glider@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
